mirror of
https://github.com/kuhyx/WUT_Computer_Science.git
synced 2026-11-10 22:47:09 +01:00
dadc2b3e6f
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| d5b94cd8a7 |
run.sh runs the program now, and says which one it is running
Reported by kuhy: "I run run.sh and I have no idea where the actual program is
and how to run it". In EPFU that was one `gcc -Wall -Wextra -pedantic main.c`
line and nothing else -- the makefile has no -o, so the binary is an a.out that
nothing mentions, and it was never executed.
Two separate failures, both fixed.
Building is not running. make, cxx, maven and dotnet built and stopped; make,
maven and dotnet did not even print where the output went, while cxx and tex
did. They all execute what they produced now. `make` is the awkward one,
because a makefile need not say what it writes: the runner snapshots the
executables either side of the build and runs whatever is new.
A course is not always one program. Twelve of them are not -- EPFU a game and
a lab, EOOP six binaries, EARIN eight labs, MOM three reports. With no target
named, an interactive run prints a numbered menu and asks; `run <dir> 2`, a
path substring, or `all` skips the prompt. Enumeration deliberately scans the
course root rather than --entry, because EPFU pinning --entry to penguins/src
is precisely why labs/krudnic3_lab1.c had never been compiled. --entry is the
default now, not the only.
Interactive by default: EPFU's penguins and ECOAR's puzzle both read stdin,
and you typed `run`, so you are at the keyboard. --batch (and any
non-terminal stdin) means no prompt, stdin from /dev/null and a 60s cap per
program, so an unattended run cannot wedge. --probe never reaches any of this
and does not even enumerate targets: all 44 probes produce a byte-identical
gates/runnability-local.tsv, and `status` is still seconds long.
Running things immediately found two bugs that could not have surfaced before,
both recorded in TODO-refactor-remaining.md rather than fixed here, since both
mean touching a submitted .c:
- EPFU/labs/krudnic3_lab1.c dies with SIGFPE, integer division by zero.
- ECOAR's puzzle.out writes dest.bmp beside its source, so the tree guard
fails the run. That guard is doing exactly its job.
Verified: EPFU both targets, EOOP under a pty answering the prompt, EADS,
ECOAR, MOM. Full gate green, shellcheck clean on all 44 runners.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0172dj34FDpao6wsix8ZuCzE
|
|||
| 37cc00fa21 |
Say which jupyter problem it is, and regenerate the status table
`_works jupyter || _blocked "needs jupyter"` collapsed two different problems into one message. "needs jupyter" and "jupyter is on PATH but does not run" send you to different fixes -- install it, versus work out why the shim's interpreter is gone -- and a status table is only worth keeping if it says which. `_require_working` checks presence and then execution, and reports them separately. The wording is now what DOCS-runnability.md already said for twm_4 and PBAD, except the probe produces it rather than someone having typed it. Regenerating the table changed those two rows and nothing else, which is the useful part: the run guard, the two new .venv directories under PSD and ERSMS-project, and the tex entry-point change left all 44 courses' status exactly as it was. One thing worth knowing for the next regeneration: the answer depends on PATH. jupyter lives in ~/.local/bin, so a shell without it reports "needs jupyter" and one with it reports the dead shim. Regenerate from a login shell. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
|||
| 7b019d103f |
Gate the zero, and fix the LaTeX course the run guard exposed
The archive reached zero ruff findings this morning, so the standing rule in
.pre-commit-config.yaml -- a hook lands only once the thing it gates is clean
-- is finally satisfied for ruff. `ruff check` and `ruff format --check` are
hooks now, pinned at v0.16.5 per rules/dependency-freshness, plus
`no-suppressions`, which rejects `# noqa` and `# type: ignore`. CLAUDE.md has
always claimed a hook did that; until now the only thing stopping them was
whoever was reading ruff's output, and I typed `# noqa-free` three times in
this session by accident. mypy stays out: six of its errors are third-party
typing limits rather than our code.
The first attempt used `language: system`, which passed `pre-commit run
--all-files` and then failed the actual commit with "Executable `ruff` not
found" -- git hooks do not get ~/.local/bin on PATH. Taking the hooks from
astral-sh/ruff-pre-commit means pre-commit installs ruff itself, which is also
what makes the pin mean anything.
`ruff format --check` failed the moment it was wired up, on four TRAK files I
wrote today and never formatted. Formatted, and the ray_tracing0 render is
still 02484bdb6b6c1ddeff317d7e5566580f.
Then the run guard from
|
|||
| f780d023be |
A run may no longer change the tree it ran in
Executing coursework has silently overwritten a submitted deliverable twice in
this campaign -- TRAK's outputs/output.png and SPD's results_*.png -- and both
times it was found by a later `git status`, not by the run. `course_main` now
snapshots what git sees under the course root before and after `_run`, and
fails with a diff naming the files if anything moved. Gitignored build output
does not show up there, which is why every runner already writes into build/.
Seen failing before being trusted: a stub whose `_run` appends a newline to
TRAK's config.ini exits 1 and names the file; the same stub without the append
exits 0; and a real `./run.sh run Programming/TRAK` still exits 0 after
rendering, because it writes into build/.
The notebook branch was the specific landmine. `nbconvert --execute --inplace`
rewrites the notebook it just ran, and all four notebooks here are tracked with
their outputs. It now executes to a temp --output-dir. That alone is not
enough, though: nbconvert runs the kernel with its cwd set to the notebook's
own directory, so a cell calling plt.savefig('x.png') still writes beside the
notebook. The tree check above is what actually catches that, which is why it
lives in course_main and applies to every course kind rather than to notebooks.
`_have jupyter` was also the wrong probe. jupyter on this machine is a pipx
shim whose interpreter is gone: `command -v` finds it, and running it exits
127. Both the probe and the runner now use `_works`, which runs `--version`.
`./Programming/twm_4/run.sh --probe` reports "needs jupyter" and exit 78
instead of failing confusingly mid-run.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|||
| bd24dd57ea |
Hold the coursework to the same lint bar as the tooling
kuhy overruled the "do not fix coursework to be better than it was submitted" rule: git history is the archive, so the working tree can be clean. This lands the config and the mechanical half of the cleanup -- 9,281 ruff findings under the fleet config down to 3,686, with no per-file-ignores anywhere. What is in here: - pyproject.toml, the first one in this repo. select = ["ALL"], mypy strict, and the vendored list mirrored into ruff exclude and coverage omit. Five rules are off and each says why; CPY001 is the only judgement call, because stamping a copyright header onto 137 university assignments would assert a licence that was never claimed. No hook is wired up yet -- a gate lands only once its subject is clean. - ruff format + the safe fixes, then a second pass over the docstring rules ruff marks unsafe (they only edit docstring text). 108 files. - TRAK/sightpy is vendored, not coursework: it is rafael-fuente/Python-Raytracer (BSD 3-Clause). Verified against a fresh upstream clone with line endings normalised -- 30 of 32 files byte-identical, ray.py and scene.py carrying a 12- and 13-line local patch that counts rays for the report. 35 files that should never have been linted, now excluded and restored. - WDWR, SPD, MOM and ECRYPT are fully clean, by hand and verified by running them: WDWR's three plot scripts print the same statistics as before, MOM's PuLP model solves to the same cost. WDWR's graph.py had a 342-character CSV header embedded as a string literal, which cannot be wrapped -- the data moved to data/pareto_front.csv. Two 0-byte .py stubs are deleted; an empty file is not a deliverable and git still has it. Three harness bugs found by actually running things: - `run` now forces MPLBACKEND=Agg. TRAK finished its ray trace in 37 seconds and then sat for 45 minutes: plt.show() had opened an image viewer and was waiting for someone to close the window. - TRAK's main.py only pops that viewer with --show now, and its runner writes to a gitignored build/ via the new --entry-args. The default output path is outputs/output.png, which is TRACKED -- a plain run overwrote a submitted deliverable. - course_lib.sh was 357 lines, over this repo's own cap. Split into course_probe.sh and course_run.sh. Verified: ECOTE 26 tests pass, ECRYPT_PROJECT 99 pass, TRAK renders cornell_box in 37s and exits 0, every module compiles, and every import ruff removed was checked to be genuinely unused. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0172dj34FDpao6wsix8ZuCzE |