\documentclass{article} \usepackage{hyperref} \usepackage{pdfpages} \title{EMISY Project 21 Portable Compass} \author{Krzysztof Rudnicki, 307585} \date{\today} \begin{document} \includepdf[pages={1}]{declaration.pdf} \maketitle \section{Analysis of the project} \subsection{Discussion of project requirements} We need to create a simple portable compass circuit \\ It should: \begin{itemize} \item Use energy-saving power modes of microcontroller \item Be battery powered \item Be portable (cellphone/wrist watch) \item Communicate using graphical OLED display and two buttons keyboard \end{itemize} \subsection{Discussion of solution} \section{Detailed circuit diagram} \section{Diagram} \subsection{Diagram itself} \subsection{Diagram description} \subsubsection{How to make the project} \newpage \subsubsection{Microcontroller} I decided to use STM32L082CZ from STM32L0 line \paragraph{Relatively small} Up to 10 mm $\times$ 10 mm dimensions, compared to apple watch display of 34 mm by 40 mm for smaller version. \cite{datasheet} 111th page \paragraph{Square} It is shaped in a square which also simplifies portability \cite{datasheet} 111th page \paragraph{Power saving} STM32L0 line was designed specifically for low power consumption with power consumption as low as 0.29 $\mu$ A in Standby mode \cite{datasheet} 1st page \paragraph{Consumer devices} This microcontroller comes from STM32LOx2 line prepared to be used in consumer devices \cite{consumerDevice} \paragraph{Ease of use} USB compatible microcontroller and dedicaded debug port allows for swift code creation. \cite{datasheet} 1st page \subsubsection{All other components} \paragraph{Oled display} For OLED display I decided to go with NHD-2.7-12864WDY3. It was an OLED display found on \href{www.mouser.pl}{mouser} webpage with lowest operating supply current of 180 uA, supply voltage compatible wit microcontroller (3.3 V) and datasheet not in japanese. \cite{OLED} \paragraph{Digital compass} For the compass I used HMC5883L with compatible voltage, low power consumption of 100 $\mu$ A, compatiblity with battery powered applications according to datasheet and small size \paragraph{Battery} For the battery I choose LTC-7PMP with capacity of 1500 mA, output voltage of 3.5 V and small size (according to datasheet it is a perfect match for space saving requirements) \cite{Battery} \paragraph{Power supply} For power supply I choose LTC3525-3.3 with high 95 \% efficiency, desirable output voltage of 3.3 V, low profile and tiny package, it is also available in kicad by default \cite{Power supply} \section{Draft of the microcontroller firmware} \subsection{Block diagram} \subsection{Description of the algorithm} \begin{thebibliography}{9} \bibitem{datasheet} \href{https://www.st.com/resource/en/datasheet/stm32l082cz.pdf}{STM32LO82CZ datasheet} \bibitem{consumerDevice} \href{https://www.st.com/en/microcontrollers-microprocessors/stm32l0-series.html}{Consumer Device STM32LOx2 Line} \bibitem{OLED} \href{https://www.mouser.pl/datasheet/2/291/NHD_2_7_12864WDY3-1116258.pdf}{OLED datasheet} \bibitem{Magnetometer} \href{https://cdn-shop.adafruit.com/datasheets/HMC5883L_3-Axis_Digital_Compass_IC.pdf}{Magnetometer datasheet} \bibitem{Battery} \href{https://www.mouser.pl/datasheet/2/118/ltc7p-932904.pdf}{Battery} \bibitem{Power supply} \href{https://www.analog.com/media/en/technical-documentation/data-sheets/3525fc.pdf}{Voltage regulator} \end{thebibliography} \end{document}