mirror of
https://github.com/kuhyx/diet-guard.git
synced 2026-11-11 12:27:42 +01:00
3a9db8a3ab
59 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| 3a9db8a3ab |
feat(sync): add prune-peers to remove device dirs nothing writes to
Every install mints a uuid and pushes under it, and nothing ever cleans those directories up. This remote holds 25: two live devices and 23 that stopped writing. Each dead one still costs a round trip in the log pull and in each of the three bank syncs -- roughly 400ms per peer per tick -- so they dominate what is left of the background tick. Diagnosis first, since the obvious theory was wrong. These are not the residue of phone reinstalls: seventeen of them are frozen at the *same* instant (2026-08-13T16:45:04) holding near-identical ~400-record copies of one log, which is the signature of repeated fresh-install runs, not organic use. That also means `adb install -r` preserving SharedPreferences was never the issue, so no Android backup change is warranted on this evidence. Dry-run by default, and the safety rails are the point: * `plan_prune` only reads; it is what the default run prints. * A device is prunable only when every record it holds is already held by a device being kept. Against the live remote that is 20 devices and **zero** records lost -- verified before writing the command, not after. * `pc`/`phone`/`desktop` are never proposed: they carry pre-migration history and `SYNC_LEGACY_DEVICE_ID` still names one as this device's own former path. * `--apply` refuses without `--backup-dir`, and every peer's raw bytes are written to disk before a single delete. Nothing has been deleted; this commit only adds the tool. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LJ5YnA3CERitQ57HjMu2Qz |
|||
| 8871408b5b |
perf(cli): publish off-thread so logging a meal returns immediately
`diet-guard log ...` blocked for ~15.5s after every meal. The publish itself has to happen -- until it lands the phone still believes the slot is unlogged and nags for it -- but only ~2.5s of that is the 293KB push the phone needs; the rest is pulling peers' banks, which publishing does not require. The local write is already durable before the publish starts, so the worst case is a late publish, which is the trade `_sync_events` already documents for the event-driven model. Moving it to a worker thread lets the caller print and return at once. Measured: 15.5s -> 2ms before the prompt comes back. The thread is deliberately non-daemon: the CLI's output is already flushed, so the process lingers only as long as the push, and the publish is never killed halfway. A failure still surfaces, via a callback the caller supplies, just after its own output rather than in the middle of it. Deliberately NOT applied to the gate. `diet-guard-gate.service` is `Type=oneshot`, so systemd reaps the unit the moment the main thread exits and a background publish would be killed mid-push. The gate keeps calling `publish_after_log` and waiting, which is correct there -- its publish already runs after the window is gone, where nobody is waiting on it. `conftest._isolate_state` follows the rename to `publish_after_log_detached`; without that every meal-logging test would reach the network through a newly unpatched seam. Verified with `scripts/check_patch_targets.py` and by timing the real command against a temporary data dir, never the live log. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LJ5YnA3CERitQ57HjMu2Qz |
|||
| 6258b35f88 |
perf(sync): hoist the device listing and stop the curated-bank 404 storm
Some checks are pending
file-length / file length <= 250 lines (push) Waiting to run
pre-commit / pre-commit (push) Waiting to run
Tests / test (3.10) (push) Waiting to run
Tests / test (3.11) (push) Waiting to run
Tests / test (3.12) (push) Waiting to run
release-apk / release (APK) (push) Waiting to run
Two independent costs in the background tick, both pure waste.
`list_directory` was called four times per tick -- once by the log pull and
once by each of the three bank syncs. It is the single most expensive call
in a tick at ~445ms mirrored (the GitHub half alone is ~360ms), so that was
~1.3s spent asking the same question four times. It is now listed once in
`run_sync` and passed down.
The curated-bank loop was worse: 17s and 62 requests to fetch *zero* useful
bytes. Firebase returns None for every peer's `food_bank_manual.json`, so
`MirrorSyncClient.get_file_text` treated each miss as "this device has not
migrated yet" and fell through to GitHub, which answers `{}` after ~320ms.
`_primary_only_text` skips that per-peer fallthrough for this one artifact.
Checked before narrowing rather than assumed, because CLAUDE.md requires
both halves of the food bank to sync: reading every peer's curated bank
straight off the mirror found 23 absent, 2 empty, and zero non-empty. No
curated food exists on the mirror alone. The probe is written into the
docstring so it can be re-run before anyone widens this again.
Measured end to end: manual-bank loop 17.0s -> 3.4s, full tick ~27s -> 15.2s,
log/bank/peer state unchanged (441 entries, 117 foods, 22 peers).
`_pull_remote_logs` now returns the revisions it saw instead of mutating a
caller-supplied dict, which keeps it under the argument limit and makes the
data flow visible at the call site.
Deliberately NOT done: revision-skipping the derived food bank. `run_sync`
rebuilds that bank from the merged log immediately before syncing it, so
unlike the log the peer records are not durably held locally -- skipping a
peer would drop its counts from the pushed bank and oscillate under
max-count-wins. Verified empirically: the on-disk bank and a pure log-derived
rebuild are identical (117 foods, 0 differing counts), and the 2 foods peers
know that the local bank lacks are discarded by the existing `if name in
local` filter anyway. The loop is off every interactive path now, so the
remaining cost is background-only.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LJ5YnA3CERitQ57HjMu2Qz
|
|||
| c7371d7e0d |
perf(gate): unfreeze "Fetch from sync" and bound the interactive timeout
The button ran a full sync tick inline on the Tk thread, so the fullscreen lock was dead for its whole duration -- ~18-27s measured against the live remote, and unbounded in the worst case. Two changes, and the second is what makes the first cheap: * the pull moves to a daemon worker thread, with the result marshalled back through a queue polled on the Tk thread. The worker touches no widget, by construction: Tcl is not thread-safe and that includes `after`. Polling also makes the completion path testable with no thread at all. * the button now runs the *narrow* pull. Its question is identical to the gate's -- "did a peer log this slot?" -- and `_reconcile_after_fetch` reads only `due_slots()`, so the budget and food banks it used to fetch were never consulted here. The full tick still runs after the window closes. Measured 84ms against the live remote. Narrowing also shrinks the write race from tens of seconds to imperceptible: the pull persists its merge, so a meal logged mid-fetch could be overwritten by a snapshot taken before it. A second click while a fetch is in flight is now ignored, which is the reentrancy guard and the race fix in one. That guard started out as a disabled button, which is how it surfaced a latent bug worth recording: the fetch button widget is never stored on `GateWidgets`, so `self._widgets.fetch_button` did not exist and the disable was a silent no-op -- hidden because the suppression tuple included `AttributeError`. Coverage would have reported 100% on a guard that did nothing. Guarding on `_fetch_result` needs no widget at all. Also adds `INTERACTIVE_TIMEOUT_SECONDS = 2.0` for the paths a user waits on. `SYNC_TIMEOUT_SECONDS` only ever reached GitHub: crdt_sync v0.6.0's `firebase_client_for` takes no timeout, so Firebase used its 15s default and one hung session refresh stalled the lock window -- the journal has five such refresh failures in five days. Verified to fail closed to the local decision. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LJ5YnA3CERitQ57HjMu2Qz |
|||
| 0173f4c56c |
Queue behind stronger lockers; bump gatelock to v0.7.1
Diet_guard was one of the two lockers missing gatelock's wait_for_turn fix -- confirmed live on 2026-08-21, it held the global grab for ~3 minutes against a newly-arriving, higher-ranked screen_locker, which just retried and logged instead of making progress. Now queues behind any stronger claim before arming. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018M5gKyYzxWG6QkCaj1wWfk |
|||
| b53ac92c59 |
perf(gate): narrow the pre-lock pull and defer the heavy imports
The gate's pre-lock refresh ran a *full* sync tick -- peer logs, budget,
both food banks, a rebuild and a push -- in front of the fullscreen lock.
Measured against the live remote: ~18-27s, of which the curated-bank loop
alone was 17s spent fetching nothing (absent on Firebase for every peer, so
each of ~21 peers fell through to a GitHub round trip returning `{}`).
It was also failing: five `sync unavailable (network error trying to refresh
the session)` entries in the last five days, one of them a meal that logged
locally but never published.
The gate has one question -- "has a peer already logged this slot?" -- and
only the peer logs can answer it. `_sync_refresh` does that and nothing
else: one bulk revision-map read, a fetch of only the peers whose revision
moved, merge, re-sign, write. No budget, no banks, no push. The full tick
still runs, after the window closes, so nothing is permanently skipped --
the exhaustive pass just moves off the path the user waits on.
Three state invariants have their own regression tests, because each is
silent when broken: `pushed_rev` survives verbatim (this pass never pushes,
and overwriting it would make the device stop publishing forever),
`peer_revs` is merged rather than replaced (only changed peers are visited),
and the log is written before the state.
Separately, `gate --check` was importing an HTTP stack and a GUI it never
uses. `requests` (~78ms) arrived via `_cli_sync` -> `crdt_sync` and via
`_resolve` -> `_estimator_off`; both are now resolved through module-level
`__getattr__` (PEP 562) and `import_module`, which keeps every existing
`patch.object` target and needs no lint suppression.
Measured: `gate --check` 216ms -> ~110ms; narrow pull 92ms against the live
remote. Accepted trade, documented in `_sync_refresh`: a budget edited on
the phone is not visible in the lock dashboard until the post-window tick.
It cannot affect the lock decision, which is why it is safe to defer.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LJ5YnA3CERitQ57HjMu2Qz
|
|||
| b8b432bee4 |
Add dopamine-ux session prompt to prompts/
Some checks failed
file-length / file length <= 250 lines (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Tests / test (3.10) (push) Has been cancelled
Tests / test (3.11) (push) Has been cancelled
Tests / test (3.12) (push) Has been cancelled
release-apk / release (APK) (push) Has been cancelled
Copy of the canonical prompt in ~/utils/dopamine-ux/, distributed here so the repo can be opened and the prompt run directly. Derived from a survey of this repo plus "The Dopamine Architecture" (london-post.co.uk). The prompt states its own completion protocol: when finished, the session deletes this copy in the implementation commit and logs a DONE row in ~/utils/dopamine-ux/00-INDEX.md. Partial completion is never recorded as done. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FdApz7EZ1zDfvtvvi1idDv |
|||
| d02f6aa6e8 |
Rebuild the slot row when settings changes the schedule
Found on the phone, not in the suite. Setting five meals updated the settings
preview and fired a reminder for the new 14:00 checkpoint, while the slot row
behind them kept showing the old 08/12/16/20 until the app was restarted:
onOpenSettings pushed the route without awaiting the pop, so the log screen
never rebuilt against the schedule the user had just chosen.
It now awaits and calls onScheduleMayHaveChanged, which re-reads the logged
slots and re-derives the selected slot -- the hour it pointed at may not be a
checkpoint at all any more. The other three destinations still fire and
forget, since none of them can change what this screen renders.
The regression test was confirmed to fail against the pre-fix behaviour
("Found 0 widgets with text 11:00") rather than passing vacuously.
Both files crossed the 250-line cap with the addition, so the hook moved to
log_meal_sync_mixin.dart -- which already owns refreshSlots and loggedSlots
and is the better home regardless -- and the new test into its own file.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM
|
|||
| ed6d283ff8 |
Document the configurable meal schedule
The rules that are expensive to rediscover: integer-only arithmetic and why (Python and Dart round differently), the count clamp and why a duplicate slot hour is worse than it looks, the last+2h cutoff and its midnight clamp, and the required-argument decision in _slots.py / slot.dart. Split into docs/meal-schedule.md rather than inlined -- CLAUDE.md hit 276 lines against the 250 cap, the same split the Flutter rules already use. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM |
|||
| c0564c05a2 |
Let the PC gate set the eating window and meal count
The second edit surface, so the schedule is editable from either device the way the budget already is. A row on the History tab beside the budget row, with the same Edit/Save toggle: first hour, last hour, meals per day, and the derived checkpoint times underneath so the effect of a change is visible before it is saved. Validated rather than clamped. MealSchedule.normalized() would happily turn "20 to 8" into a two-meal day ending at 09:00, which is a sensible defence against a peer's corrupt sync data and a terrible response to a typo at the keyboard. Each rejection says what is wrong and leaves the row in edit mode so the value can be corrected instead of silently becoming a different schedule. The narrow-window case has its own message, because that one is genuinely non-obvious: six meals between 08:00 and 11:00 would round two checkpoints onto the same hour, and a duplicate slot silently drops one. Three structural notes: - The row's widgets are their own module. _gatelock_calendar_widgets.py was at 216 of the 250-line cap and is now 233; adding the row inline would have breached it. - The five new StringVars are grouped in a ScheduleVars dataclass rather than flattened onto CalendarVars, which pylint flagged at 11 attributes. Grouping two unrelated concerns separately is the better shape anyway. - _gate_fixtures.py's _GATE_TK_MODULES is a hand-listed patch target, so both new modules are registered there. Left out, they build real tk widgets under a fake parent -- which is how it failed the first time, loudly, rather than silently opening a window. 785 tests, 100% branch coverage. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM |
|||
| da8822006f |
Let the phone set the eating window and meal count
The first edit surface, landing after the sync layer so a schedule set here reaches the PC rather than leaving the two devices deriving different slots. Three dropdowns -- first meal, last meal, meals per day -- and a live preview of the checkpoints they derive. Setting 08:00, 20:00 and 5 shows 08:00 · 11:00 · 14:00 · 17:00 · 20:00, which is asserted in the screen test rather than only in the model's. Dropdowns rather than showTimePicker: that returns a TimeOfDay with minutes, and slots are whole hours on both devices by design. They also make the invalid states unrepresentable instead of validated -- "last meal" offers only hours after "first", and "meals per day" only counts the window has whole hours for. MealSchedule.normalized() still clamps, but that is the defence against corrupt synced data, not the input contract. Saving re-runs the due-slot check, because reminder ids are slot hours: a schedule change orphans the ids it no longer contains, and waiting for the next background tick would leave a stale nag on screen for up to 15 minutes. The UI is a `part` mixin like settings_kcal_goal.dart -- settings_screen.dart was at 238 of the 250-line cap and is now at 247. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM |
|||
| 24dbffc432 |
Sync the meal schedule as sched: fields on the budget record
Without this the schedule would be device-local, which is the failure this
whole feature has to avoid: the phone sets five meals, the PC still derives
four, and the PC's gate nags for a 12:00 checkpoint the phone never offered
and can never satisfy. So sync lands before either edit surface, not after.
The history rides the existing `budget` CRDT record as one
`sched:<YYYY-MM-DD>` field per entry, exactly like the budget's own `hist:`
fields. merge_record is per-field LWW over the *union* of field names and both
devices push the merged record, so a device that predates the feature relays
the fields untouched -- no coordinated release. There is a test for precisely
that: merging our push with a budget-only peer keeps both schedule entries.
Verified the two languages agree on the wire, not just in their own suites --
Python and Dart both emit
{"sched:1970-01-01":{"f":8,"l":20,"n":4},"sched:2026-08-16":{"f":8,"l":20,"n":5}}
The Hlc is derived from the *parsed* timestamp on both sides, which matters
because the epoch fallback formats differently in each language
(1970-01-01T00:00:00+00:00 vs ...000Z) and a string comparison would diverge.
Two guards worth naming:
- A device with no history contributes no `sched:` fields at all, so an unset
default can never outrank a peer's real schedule; and an empty merge result
is never written back, so a pre-feature peer cannot erase a real history.
- Dart's `_syncBudget` synthesises a local record when the schedule has been
edited but the budget never has -- `budgetToLog(null, ...)` returns an empty
Log and would otherwise drop the schedule fields too. Its budget value
carries an epoch stamp, so it loses every LWW race against a real edit.
sync_merge/_schedule.py and sync_merge_schedule.dart are separate modules
rather than additions to the budget adapters, which were at 186 and 170 lines
against the 250 cap. Each declares its own record-id constant so the Dart
pair does not import each other.
772 Python tests at 100% branch coverage, 619 Dart.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM
|
|||
| d2e62bf210 |
Read the meal schedule from a forward-only history (Dart)
The phone/desktop half of the previous commit, so both devices now derive their slots the same way. Still no edit surface, so `MealScheduleService` returns the default and the derived hours are unchanged at 08/12/16/20. `slot.dart` takes the schedule as a required argument, mirroring `_slots.py`, and `slot_test.dart` gains the same every-hour x several-schedules sweep the Python suite runs. That sweep is the contract: the two must agree on which checkpoint a meal satisfies for every cell, not merely on the endpoints. Also fixes a real bug this feature would otherwise have shipped on top of. `syncToSlots` used the slot hour as the notification id but only cancelled ids in the *current* schedule, so changing 08/12/16/20 -> 08/11/14/17/20 would leave ids 12 and 16 posted with nothing that could ever cancel them: permanent reminders for checkpoints that no longer exist. It now sweeps the whole 0..23 id space. The regression test was confirmed to fail against the old loop (4 cancels vs 24) rather than passing vacuously. MealScheduleService.current degrades to the default when the singleton is absent, so `due_slot_check` deliberately does not init() it -- that would reach path_provider from widget tests and from the WorkManager isolate before main() runs. main.dart owns the real init, and background_sync_service.dart does its own, since a fresh isolate has its own static state and would otherwise nag against the default four meals. 609 Dart tests, 761 Python, both suites green. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM |
|||
| 2bdb7925a8 |
Read the meal schedule from a forward-only history (Python)
Wires the Python side to the configurable schedule. No edit surface yet, so nothing writes a schedule and current_schedule() returns the default -- the derived hours are still 08/12/16/20 and the cutoff is still 22:00. Verified by running it: before any edit the slots are unchanged, after recording 08-20 x5 they become 08:00, 11:00, 14:00, 17:00, 20:00, and a 2020 day still resolves to the four-meal schedule. _slots.py now takes the schedule as a *required* argument rather than reading module constants. Required, not defaulted, on purpose: a default would let a call site missed in this refactor keep deriving the old fixed hours on one device, and a slot one device offers while the other does not is a checkpoint that can never be satisfied. Making it required let mypy enumerate the nine call sites instead of trusting a grep. The history is forward-only and seeds the default at the epoch *before* recording today's value, so switching to five meals leaves past days judged against the four-meal schedule they actually ran under. Same shape and same reasoning as _budget_history.py; it will ride the same CRDT record. Two details worth naming: - MEAL_SCHEDULE_FILE lands in DATA_DIR, so conftest's _isolate_state redirect is patched in this same commit rather than a later one. Confirmed with a canary that the redirect is live and that ~/.local/share/diet_guard/ has no .meal_schedule after a full run. - _mcp_read imports _budget.current_schedule already, so the meal-schedule lookup is aliased rather than shadowing it. _gatelock._pending_slots is spelled `is None` rather than `or` now. The two are in fact equivalent -- if 0 is a slot it is necessarily the first slot, checked exhaustively -- but the intent should not rest on that coincidence. 761 tests, 100% branch coverage. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM |
|||
| 83c3030b55 |
Derive meal slots from an eating window and a meal count
First step of the configurable meal schedule: the pure arithmetic, in both languages, with nothing wired to it yet. MealSchedule(8, 20, 5) gives 08, 11, 14, 17, 20; the default MealSchedule(8, 20, 4) reproduces the hours that are currently hardcoded, so nothing changes behaviour until a user picks something else. Two properties are load-bearing and both are tested rather than asserted in prose: Integer arithmetic only, no floats and no round(). Python's round() is banker's (round(2.5) == 2) and Dart's is half-away-from-zero (2.5.round() == 3), so a floating-point derivation would silently disagree across devices -- and a slot one device offers but the other does not is a checkpoint that can never be satisfied, i.e. a permanent lock. The shared vector table plus an identical 6912-case sweep in both suites is what catches that class of bug before it reaches a device. Counts are clamped to the window width rather than rejected. A narrow window (08-12 across 6 meals) would otherwise repeat an hour -- 8, 9, 10, 10, 11, 12 -- and slot hours are used as set members, map keys and notification ids, so a repeat silently drops a checkpoint. Clamping also means the two languages cannot disagree about which inputs are errors. The enforcement cutoff is now derived as last + 2h (clamped to midnight) rather than sharing the constant that also bounded the slot range. The clamp matters: 23:00 + 2 = 25 would make `hour < cutoff` vacuously true and the window would never close. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM |
|||
| cbbebee79b |
Pin meal pills to one row; drop the "Logged" restatement
Three independent cleanups ahead of the configurable meal schedule.
Pills: the row was a `Wrap`, so pills dropped onto a second line as soon as
they outgrew the width -- which they do even at four. Measured: a logged chip
is ~124px at Material defaults, so four need 522px against ~330px of phone
width. Now a `FittedBox(scaleDown)` over a `Row`, which scales the row down
uniformly, plus compact chip density so there is less to scale away.
A `Row` of `Expanded` children was the obvious alternative and is wrong: it
imposes a tight width, and a Chip narrower than avatar+padding+label clips its
label rather than shrinking -- measured at 10px per label, about one character,
while throwing no overflow error. The new regression test therefore asserts
both a shared baseline and a legible label width; it was confirmed to fail on
the old `Wrap` ("chip wrapped to a second line at 320.0") rather than passing
vacuously.
Card: the `Logged "<meal>".` line restated the description the user had just
typed. Removed, along with `TodayProgress.justLogged`, which nothing else read.
The kcal position, macros and streak stay.
refactor_claude_todo.md: the 250-line file-splitting refactor it tracked is
done -- `scripts/check_file_length.sh --all` exits 0 and an independent sweep
finds nothing over the cap. DESIGN_AUDIT_TODO.md is a separate, still-open
effort and stays.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0159b4E5hh512jYUeaJVNxfM
|
|||
| cb23f3c09d |
Fix check_patch_targets' own fail-open: put the repo root on sys.path
Some checks are pending
file-length / file length <= 250 lines (push) Waiting to run
pre-commit / pre-commit (push) Waiting to run
Tests / test (3.10) (push) Waiting to run
Tests / test (3.11) (push) Waiting to run
Tests / test (3.12) (push) Waiting to run
release-apk / release (APK) (push) Waiting to run
The pre-commit CI job reported all 19 patch targets stale, including ones no commit in this sweep touched -- the tell that the checker, not the targets, was broken. Running it as `python3 scripts/check_patch_targets.py` puts *scripts/* on sys.path[0], not the repo root. `diet_guard` is not installed in the runner's environment (CI installs requirements.txt only), so every `import_module` hit the resolver's `except ImportError: continue` and every target reported unresolvable. It passed locally because the dev venv has the package on the path. That is precisely the fail-open shape this script exists to prevent, in the script itself: a green-or-red signal that reflects the environment rather than the code. Two fixes: - put the repo root on sys.path explicitly, so the checker resolves the same way whatever cwd or interpreter invokes it; - import the package once up front and fail with a distinct message if that fails, so "the package will not import" can never again masquerade as "every patch target moved". Reproduced in a clean venv built from requirements.txt: 19 stale before, exit 0 after, and still exactly 1 stale when a target is genuinely broken (verified by renaming FOOD_LOG_FILE's target). Verified: 708 Python tests / 100% branch coverage, pre-commit clean, checker exit 0 under both the dev venv and the clean venv. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| 5125a98980 |
Register the _hmac_key fixture; guard the redirect so it fails locally
Some checks are pending
file-length / file length <= 250 lines (push) Waiting to run
pre-commit / pre-commit (push) Waiting to run
Tests / test (3.10) (push) Waiting to run
Tests / test (3.11) (push) Waiting to run
Tests / test (3.12) (push) Waiting to run
release-apk / release (APK) (push) Waiting to run
CI's Tests job went red on six signing assertions that pass on this machine.
Root cause predates this sweep: commit
|
|||
| 499882b1de |
Sort plugin_platform_interface into dev_dependencies alphabetically
Caught by the pre-push CI mirror, which runs `flutter analyze` over the whole project; the per-batch `flutter analyze lib/ test/` used during the sweep does not cover pubspec.yaml, so `sort_pub_dependencies` never fired there. The entry was appended after a blank line by `flutter pub` during the mirror's own clean-venv resolve, landing out of order and outside the dev_dependencies block it belongs to. Verified: flutter analyze (whole project) clean, flutter test 555. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| c77e7d9acf |
Split the last four Dart lib files; file-length gate now reports zero
Final batch of the 250-line sweep. `check_file_length.sh --all` exits 0: every file in the repo is at or under 250 lines. github_mirror_screen.dart 391 -> 205 (+ actions, client_id_dialog parts) foodbank_service.dart 314 -> 209 (+ foodbank_service_manual part) settings_screen.dart 286 -> 237 (+ settings_kcal_goal part) firebase_backend.dart 282 -> 100 (+ firebase_client.dart) Three of the four are `part` files rather than separate libraries, and that is forced rather than stylistic: the moved code drives private state (`_busy`, `_status`, the text controllers) and calls private helpers (`_readBank`, `_normalize`), none of which are visible across a library boundary in Dart. Widening them to public just to split a file would leak internals the rest of the app has no business calling. Within those parts, mixins rather than extensions, for a concrete reason: an extension is not a subclass of `State`, so calling `setState` from one is an `invalid_use_of_protected_member`. Fields the State must own (the controllers it creates and disposes) stay declared there and are reached through abstract getters. `firebase_client.dart` is a real library split -- opening an authenticated client has no private coupling to the keystore-backed account record, only to its public API. The one exception, dropping the account marker without setting the opt-out flag, became `forgetAccountMarker()` rather than exposing the secure store. Verified: flutter test 555 (unchanged), flutter analyze clean, 707 Python tests / 100% branch coverage, check_patch_targets 0, pre-commit clean, check_file_length.sh --all exit 0. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| 3c67cf8c9c |
Split log_meal_screen into mixins and widget helpers
Twelfth batch of the 250-line sweep (over-cap count 5 -> 4). log_meal_screen.dart 431 -> 250 Widget/behaviour extraction only, no route changes: the four app-bar buttons push exactly the MaterialPageRoutes they did before. log_meal_sync_mixin.dart background sync + app lifecycle observation log_meal_nav_mixin.dart the four app-bar destinations log_meal_actions.dart the app-bar IconButton list log_meal_progress.dart buildTodayProgress + parseMacroField (both pure) The sync and nav halves are mixins rather than helper classes because the behaviour is inseparable from the State it drives -- it observes the widget lifecycle, calls setState, and reads `mounted`. The screen's fields stay declared on the State; `syncHttpClient` is an abstract getter because `widget` is typed `T` inside a mixin, so `widget.httpClient` does not resolve there. Names crossing the new file boundaries became public with doc comments, as `public_member_api_docs` requires. The macro-filling block moved onto `MacroControllers.fillFrom`, next to the existing `clear()`, which is where it belonged anyway. Verified: flutter test 555 (unchanged), flutter analyze clean, pre-commit clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| c0ed6154ac |
Split the remaining seven Dart test files
Eleventh batch of the 250-line sweep (over-cap count 12 -> 5). Every test file in the repo, Python and Dart, is now under cap; the five left are all in app/lib/. wrapper_server_test.dart 349 -> 145 (+ proxy, account siblings) app_settings_service_test.dart 321 -> 162 (+ sync sibling) average_service_test.dart 299 -> 158 (+ periods sibling) settings_screen_test.dart 274 -> 189 (+ battery sibling) day_status_service_test.dart 270 -> 161 (+ streaks sibling) edit_entry_screen_test.dart 269 -> 159 (+ foodbank sibling) day_status_calendar_test.dart 256 -> 237 (+ _test_support sibling) day_status_calendar_test is a single group whose tests close over group-local state, so it could not be split by block. Its ~25 lines of file-level fixtures moved to `day_status_calendar_test_support.dart` instead, which required the same publicisation as the sync support file (`_theme` -> `appTheme`, `_wrap` -> `wrapInApp`, `_colorOfDay` -> `colorOfDay`) with doc comments. Block counts were compared against HEAD per family rather than trusting the suite total, since the duplication bug in the previous batch passed green at an inflated count. All seven families match exactly (29/26/34/11/34/8/14). Verified: flutter test 555 (unchanged), flutter analyze clean, pre-commit clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| cc78dd383b |
Split six Dart test files; share the sync fixtures via a support sibling
Tenth batch of the 250-line sweep (over-cap count 18 -> 12; all Python is
already clear, so the remainder is Dart).
sync_merge_test.dart 694 -> 232 (+ 4 siblings)
github_mirror_screen_test.dart 512 -> 250 (+ 3 siblings)
foodbank_service_test.dart 395 -> 190 (+ manual sibling)
sync_service_test.dart 394 -> 203 (+ budget sibling + support)
log_storage_service_test.dart 385 -> 182 (+ edit sibling)
log_meal_screen_test.dart 362 -> 243 (+ nav sibling)
sync_service_test's ~100-line fixture block is shared through
`sync_service_test_support.dart` rather than duplicated: copying it would have
put both siblings back over the cap on their own. The helpers had to become
public (`_FakeGitHub` -> `FakeGitHub`, `_manual` -> `manualNutrition`,
`_remoteBudgetJson` -> `remoteBudgetJson`) with doc comments, since a leading
underscore is library-private in Dart and the siblings could not otherwise see
them.
The block-boundary matcher earned two fixes, both caught by comparing block
counts against HEAD rather than by the suite:
- A test name wrapped onto its own line (dart format does this past 80 cols)
was invisible to a same-line-only pattern, so the neighbouring span sliced
through it -- the file stopped compiling. Spans now end at the matching
close paren of the call, not at a guess past the closure brace.
- A double-quoted name containing an apostrophe ("skips its own device id
('phone')") was excluded by a character class that banned both quote
characters. That block fell into the shared prologue and was duplicated into
every output: the suite went GREEN at 559 tests instead of 555. Reverted and
redone; text between two blocks is now treated as a shared helper.
Verified: flutter test 555 (unchanged, and each split family's block count
matches HEAD exactly), flutter analyze clean, pre-commit clean.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC
|
|||
| 3e51e614b1 |
Split the last seven Python files; extend the redirect guard to all five paths
Ninth batch of the 250-line sweep. Every Python file in the repo is now under cap (over-cap count 25 -> 18; the 18 remaining are all Dart). _foodbank.py 365 -> 210 (+ _foodbank_search, _foodbank_rebuild) test_averages.py 351 -> 222 (+ test_averages_report.py) _estimator.py 325 -> 137 (+ _estimator_off.py) _budget.py 323 -> 227 (+ _budget_biometrics, _budget_derived) test_foodbank.py 311 -> 117 (+ test_foodbank_rebuild.py) _averages.py 298 -> 174 (+ _averages_periods, _averages_report) test_budget_history.py 288 -> 162 (+ test_budget_history_io.py) The split boundaries are constrained by which module owns each conftest-patched state path, not by line count. BUDGET_FILE stays in _budget, FOOD_BANK_FILE in _foodbank: the derived/search/rebuild halves reach the file only through their parent's private helpers. Two of the new modules had copied FOOD_BANK_FILE into their headers as an incidental import, which is exactly the leak the guard is for -- both cleaned. test_state_redirect.py now covers all five redirected paths (FOOD_LOG_FILE, BUDGET_FILE, BUDGET_HISTORY_FILE, FOOD_BANK_FILE, MANUAL_BANK_FILE) rather than just the food log, in both directions: only the owning module may name each constant, and each redirect demonstrably moves a real write off the live path. Two rewires fail-closed rather than silently: `_budget.budget_weight` and `_estimator.requests` were module-attribute references no import rewrite touches, and both raised AttributeError immediately. The latter appeared only after ruff removed the now-unused `requests` import from _estimator -- the import was load-bearing solely as a patch target. Verified: 707 Python tests / 100% branch coverage, 5 layout-fits tests under xvfb, check_patch_targets 0, pre-commit clean, ~/.local/share/diet_guard byte-identical. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| df5e1272f1 |
Make _FakeTclError subclass the real tkinter.TclError
Found while auditing the `_NO_WIDGETS` exemption added two commits ago: the comment claimed `_gatelock_widgetgroups` binds real `tk` only for its `contextlib.suppress(tk.TclError)` dead-copy guards. That part is true -- it constructs no widgets -- but the consequence was wrong. `_FakeTclError` subclassed `Exception`, not `tkinter.TclError`, so a fake-tk gate test raising it sailed straight through those suppressions. The "a monitor vanished mid-update" paths were therefore only ever exercised against the real error; with the fake they would have raised through the gate. Reproduced directly before fixing: a `_FAKE_TK.TclError` escaped `WidgetGroup.config` both with and without the module patched, so adding the module to the patch set would not have fixed it. `tkinter.TclError` subclasses `Exception`, so inheriting keeps every existing `except _FakeTclError` working and makes both spellings catchable. `test_fake_tclerror_is_catchable_as_the_real_one` pins it and asserts the live copy still gets configured; reverting the base class fails it. Verified: 707 Python tests / 100% branch coverage, pre-commit clean. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| af461d3157 |
Split _state.py and _tk_fakes.py; make the food-log redirect fail closed
Eighth batch of the 250-line sweep (over-cap count 28 -> 25). _state.py 366 -> 197 (+ _state_today.py, _state_sync.py) test_state.py 400 -> 221 (+ test_state_today.py, test_state_sync.py) _tk_fakes.py 368 -> 167 (+ _tk_fakes_containers.py, _tk_fakes_canvas.py) _state.py is the file conftest patches FOOD_LOG_FILE on, so the split is constrained rather than free: `FOOD_LOG_FILE` and the two functions that open it stay put, and the derived read model (_state_today) and the sync/undo helpers (_state_sync) reach the file only through _state's private _read_raw_log/_write_log. Callers were rewired to import from the new modules directly rather than via a circular re-export. That constraint is now enforced instead of merely documented. Moving a reader of FOOD_LOG_FILE into a sibling would leave conftest's patch pointing at a name nothing reads: check_patch_targets.py still exits 0 (the path resolves) and the runtime is unchanged (a file write, not a network call), so the suite would go green while writing to the real ~/.local/share/diet_guard and the next sync tick would publish it. test_state_redirect.py asserts both halves -- only _constants and _state may name the constant, and the redirect demonstrably moves a real write off the live path. Verified it fails closed by adding a FOOD_LOG_FILE reader to _state_today: it named that module exactly. _tk_fakes.py keeps _FAKE_TK/_FAKE_TTK and gains an explicit __all__, since the re-exports are load-bearing and ruff would otherwise strip them as unused. The identity canary from the previous commit covers the split: breaking one entry in the assembly (Canvas=object) fails 8 gate tests loudly rather than silently building real widgets. Verified: 706 Python tests / 100% branch coverage, check_patch_targets 0, pre-commit clean, ~/.local/share/diet_guard byte-identical. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| 8f2d1011c7 |
Split the three gate test files; assert fake_tk really swaps tkinter
Seventh batch of the 250-line sweep (over-cap count 31 -> 28). The test files mirror the source split from the previous commit one-for-one: test_gatelock_mealflow.py 379 -> 227 (+ test_gatelock_dashboard.py) test_gatelock_fanout.py 335 -> 128 (+ test_gatelock_groups.py) test_gatelock.py 331 -> 224 (+ test_gatelock_form.py) `test_gatelock_dashboard.py` follows `_gatelock_dashboard`/the slot walk and manual sync; `test_gatelock_groups.py` takes the group primitives that `_gatelock_widgetgroups` now owns; `test_gatelock_form.py` takes the form and basis/amount cases. Also closes the remaining half of the fake-tk fail-open. The previous commit's canary proved every widget-building module is *named* in `_GATE_TK_MODULES`; it could not prove the patch installs something that is not real tkinter. If `_FAKE_TK` were imported from the wrong place after the coming `_tk_fakes.py` split, every module would still be "patched" and the suite would still pass while building real widgets. `test_fake_tk_actually_replaces_real_tkinter` now asserts `module.tk is _FAKE_TK` for every entry *inside* the `fake_tk()` context, plus both `ttk` fakes and restoration afterwards. Verified it fails closed by making one module skip the patch: it reported exactly that module. Verified: 704 Python tests / 100% branch coverage, check_patch_targets 0, pre-commit clean, ~/.local/share/diet_guard byte-identical (gate timer paused for the batch). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| e8f0ecaae1 |
Split the six Python gate files; guard the fake-tk patch set
Sixth batch of the 250-line sweep. All six gate sources named for this batch are now under cap, plus _gate_layout_probe.py, which this batch's import rewiring pulled into the changeset (over-cap count 38 -> 31). _gatelock_ui.py 477 -> 174 (palette/leaf-helper hub) _gate_layout_probe.py 346 -> 196 _gatelock_groups.py 308 -> 137 _gatelock_calendar_ui 295 -> 77 _gatelock_calendar.py 286 -> 210 _gatelock.py 263 -> 238 _gatelock_mealflow.py 259 -> 207 New siblings: _gatelock_fields (input widgets), _gatelock_layout (assembly), _gatelock_widgetgroups (per-widget mirroring), _gatelock_calendar_types (bundles/palette), _gatelock_calendar_widgets (History builders), _gatelock_dashboard and _gatelock_budgetedit (mixins), _gatelock_lockfile (the stdlib-only flock), _gate_focus_probe and _gate_measurement. The load-bearing part is the test seam, not the line counts. `_gate_fixtures._GATE_TK_MODULES` patches `tk` on a hand-listed tuple, and that list fails OPEN: a widget builder split into a new sibling that nobody adds to it builds *real* Tk widgets against fake parents. Neither existing detector sees that -- check_patch_targets.py only validates paths that still resolve, and the ~8s runtime only catches network calls. It bit twice during this split (real StringVars from make_calendar_vars returned MagicMocks instead of the asserted text), so test_gate_tk_modules.py now asserts the invariant directly: every module binding `tk` is in the patch set or named in _NO_WIDGETS with a reason. It caught a pre-existing gap too -- _gatelock_support was never in the set. Same fail-open shape drove two other choices: `escape_tab_trap` is a call-time indirection so the keyboard test's patch of `_escape_text_tab_trap` still bites, and the flock pair moved with its conftest patch target updated in the same edit (that one fails closed). build_layout is imported from _gatelock_layout directly rather than re-exported lazily, which avoids both a cycle and an import-outside-toplevel suppression. Verified: 703 Python tests / 100% branch coverage, the 5 layout-fits tests under xvfb, 555 Flutter tests (unchanged), flutter analyze clean, check_patch_targets 0, `sync` 0 (403 entries), pre-commit clean, and `gate --demo` renders both tabs with live dashboard data. ~/.local/share/diet_guard byte-identical across the batch (gate timer paused, restored after). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| 7cb09a5b85 |
Split food_bank_screen; share the filter widgets with history
food_bank_screen.dart (712) carried a near-clone of the filter sheet batch 2
had just factored out of history: the same name-search field, the same slider
captions, and four more copies of the same min/max macro range block. Splitting
it in isolation would have baked that duplication in permanently, so the shared
widgets moved to a neutral `lib/widgets/filters/` first and both screens now
import them.
food_bank_screen.dart 712 -> 238
lib/widgets/food_bank/
fb_filter.dart 156 FbFilter, FbSortField, applyFbFilter
fb_filter_sheet.dart 244 the sheet itself
fb_add_entry_dialog.dart 103 the manual-entry dialog
lib/widgets/history/history_filter_fields.dart
-> lib/widgets/filters/filter_fields.dart
FilterRangeRow gained `showEndpointLabels`, defaulting to true. History showed
endpoint captions and a selected-range readout; the food-bank sheet never did,
and switching them on there would have been a UI change smuggled in under a
refactor. The food-bank call sites pass false, so both screens render exactly
what they rendered before.
FbSortField and HistorySortField stay separate on purpose -- they are not the
same enum (`name` vs `date`/`description`), so the sort dropdown is not shared.
The test file mirrors the source split, three files under test/screens/
food_bank/ plus fb_test_support.dart for the setUp/tearDown/settle prologue,
same shape as batch 2's history_test_support.dart.
Verified: 555 flutter tests (unchanged count -- no test lost, and food bank's
own RangeSlider/sort-toggle tests still pass against the shared widget),
flutter analyze clean over lib/ and test/, live ~/.local/share/diet_guard
byte-identical. Over-cap files: 40 -> 38.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC
|
|||
| 895a87cf86 |
Split history_screen and its test into widget siblings
history_screen.dart (1052) and history_screen_test.dart (1017) were a third of
the remaining over-cap work. Widget extraction only -- no route changes, since
routes are user-visible and repo_invariants_test.dart pins the navigation
surface.
history_screen.dart 1052 -> 211
lib/widgets/history/
history_filter.dart 102 filter criteria + sort enum (pure data)
history_grouping.dart 206 HistoryItem tree, apply/group/format
history_list.dart 194 GroupedList, DayHeaderTile, EntryTile
history_filter_sheet.dart 242 the sheet itself
history_filter_fields.dart 168 search field, slider labels, range row
history_filter_sort.dart 140 source chips + sort controls
Names that now cross a file boundary became public (HistoryItem, DayHeader,
EntryRow, buildGroupedItems, formatDay, dateRangeLabel, the tile widgets), each
with the doc comment public_member_api_docs requires -- 49 of them, written
rather than suppressed.
The four macro range sliders (kcal/protein/carbs/fat) were four near-identical
30-line blocks differing only in label, key, unit and which HistoryFilter pair
they read/write. They are now one FilterRangeRow taking min/max plus an
onChanged, which is most of how the sheet got under the cap.
The test file mirrors the source split one-for-one, six files under
test/screens/history/. Its setUp/tearDown and the settle() helper (needed by
every part, because HistoryScreen loads via an untracked initState future) moved
to history_test_support.dart rather than being copy-pasted six times.
Verified: 555 flutter tests (same count as before -- no test lost in the split),
flutter analyze clean over all of lib/ and test/, 701 python tests at 100%
branch coverage, `python -m diet_guard sync` -> 402 entries/exit 0, live
~/.local/share/diet_guard byte-identical. Over-cap files: 42 -> 40.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC
|
|||
| 38d66a8492 |
Make PC sync event-driven; retire the 15-min timer
The periodic diet-guard-sync.timer paid a network round-trip every ~15 min to approximate the two moments the shared log actually changes on this device. Sync now fires on those events instead: * before a lock -- already present in _cli_gate._should_lock, which pulls only when a lock is otherwise due, so a phone-logged meal clears the lock and a not-due tick never touches the network; * after a meal is logged here -- new _sync_events.publish_after_log, wired into all three write paths (_cli_log, _cli_gate, _mcp). This is what stops the PHONE nagging for a slot already logged on the PC, the mirror image of the rule that keeps the phone's own tick unconditional. The gate's publish sits in cmd_gate AFTER MealGate.run() returns, never in the unlock handler: that runs on the Tk thread with the window still up, so a hanging network call would keep the user locked in behind a successful log. It also covers the "Synced from another device" unlock, which hooking log_meal would miss. Accepted trade: a PC that is on but neither logging nor locking no longer pulls, so an inbound phone edit lands at the next log or lock rather than within 15 min. Bounded by slot spacing -- an unlogged day raises a lock. install.sh now disables and removes the installed timer (guarded, since a fresh machine has no such unit and `disable` would abort under `set -euo pipefail`); the .service stays for manual one-off ticks. Every test that logs a meal would otherwise reach the network through the new call sites, so conftest patches publish_after_log at each of the three call sites -- not on _sync_events, so test_sync_events still exercises the real helper. Suite stays at ~8s, which is the actual leak detector. Two files had to be split to commit at all, since file-length passes filenames and both were already over the 250-line cap: _cli.py 466 -> 207, + _cli_args.py, _cli_init.py, _cli_log.py _mcp.py 370 -> 194, + _mcp_server.py (singleton + annotations), _mcp_read.py Their conftest/test patch targets moved in the same commit; a stale target redirects nothing and fails open. Verified: 701 python tests at 100% branch coverage, 555 flutter tests, `python -m diet_guard sync` -> 402 entries/exit 0, `gate --check` -> exit 0, all five MCP tools still register, live ~/.local/share/diet_guard byte-identical. Over-cap files: 44 -> 42. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RA9ynjqXPnexRQnR5oAuCC |
|||
| 1e201acbdc |
Split _sync.py and its tests; extract the gate fixtures from conftest
_sync.py 498 -> 165, into siblings that each own one concern:
_sync_client.py picking a backend and building the remote store
_sync_banks.py pull/merge/push for the food bank and the budget
_sync_paths.py the kuhyx/syncs wire layout, shared by both
_sync_errors.py SyncError, so _sync and _sync_client need not import
each other
The patch targets moved with the code they guard, which is the whole risk of
this commit. unittest.mock.patch and monkeypatch.setattr both bind to a
*module object*, so a patch left pointing at _sync after CONFIG_FILE and
SYNC_TOKEN_FILE moved to _sync_client redirects nothing. That is not
hypothetical here: the first run of the suite took 9m18s instead of 7s and
raised 401s, because tests were reaching the real GitHub API with a fake
token. Repointed:
conftest SYNC_TOKEN_FILE, CONFIG_FILE -> _sync_client
test_sync* GitHubSyncClient (30 patch sites) -> _sync_client
test_backend mirror/firebase_client_for -> _sync_client
The repo's own _test_guard caught the same leak independently, which is the
behaviour worth keeping: two guards, both fail-closed.
test_sync.py 482 -> 205, splitting the budget and pull/revision classes into
siblings and the shared fakes into _sync_fakes.py.
conftest.py 284 -> 155, moving the Tk/gatelock fixtures to _gate_fixtures.py.
Importing them back is what registers them (pytest_plugins is an error in a
non-root conftest), and they are named in __all__ because ruff's autofix
otherwise deletes the "unused" import and silently disables Tk blocking --
it did exactly that once here. Verified afterwards with a canary asserting
_gatelock.tk is still a MagicMock, not merely that the suite passes.
Verified: 692 tests / 100% coverage unchanged; ~/.local/share/diet_guard
byte-identical before and after the run; cd /tmp && python3 -m diet_guard sync
-> 402 entries, exit 0. Gate 47 -> 44.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MK3HCZrM75sRHL1gL8usve
|
|||
| fef140d970 |
Split wrapper_server and sync_merge into siblings
Two Dart files whose contents were already cleanly separable. wrapper_server.dart (254 -> 228): contentTypeFor is a pure function of the path with no server state, so it moves to content_types.dart as a plain library. WrapperServer.contentTypeFor stays as a static forwarder because the test reaches for it by that name. sync_merge.dart (475 -> 190): three near-independent blocks -- daylog, banks, budget -- split along the seams the tests already use. The banks and budget adapters move to siblings and are re-exported, so sync_service.dart and both test files import exactly what they did before and needed no edits. Flutter 555 tests unchanged; analyze clean; gate 52 -> 49. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MK3HCZrM75sRHL1gL8usve |
|||
| 17a2c62f26 |
Automate CLAUDE.md's structural rules, then cut it to 189 lines
CLAUDE.md was 1101 lines and loaded into every session in this repo. Three
passes, in order: automate what a gate can check, rewrite what is left as
instructions rather than rationale, extract what still does not fit.
Automated. Five prohibitions were enforced by nothing but a paragraph asking a
future reader not to do something; they are now repo_invariants_test.dart:
- no app/linux/ (a GTK embedder target manages ~20fps at 4K)
- dart:io only in *_io.dart seams and lib/desktop/ -- this one is why the
test exists at all, since dart:io does not fail a web *compile*. It throws
at runtime, so a bad import is a blank white window that the widget tests
happily pass through.
- no meal builder / repeat-last-meal / reward prompt
- no image_picker, no CAMERA permission
- wrapper port 8732 and the diet-guard-desktop Chrome profile, both pinned
because IndexedDB is keyed by origin and moving either hides the whole
local food log
Each guard was canary-tested by breaking the invariant and confirming the
suite goes red -- a guard that cannot fail is decoration.
Rules whose behaviour was already covered (budget epoch seeding, sync merge,
food bank) shrink to a pointer at the test that owns them.
Where a rule's entire value was its rationale ("the removal is the feature"),
the why moved into the name and reason string of the gate that now enforces
it, so it lives somewhere executable instead of somewhere quotable.
Extracted. The vendored flutter/flutter rules were 789 of the 1101 lines --
72% of the file, none of it about this repo. Split into five docs/ topic files
under the cap and linked. Verified content-complete: 664 non-blank lines in,
664 out, zero missing.
Python 692 tests / 100% coverage unchanged; Flutter 548 -> 555 (+7 new).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MK3HCZrM75sRHL1gL8usve
|
|||
| c7538f691b |
Enforce the shared 250-line file cap
Replace this repo's stale file-length hook with the shared gate every other
repo will use. The old hook capped at 500 lines, called a repo-local
scripts/check_file_length.py, and filtered to types_or: [python, shell] --
so it never looked at the Flutter app in app/ or at any prose. Two caps that
disagree is worse than one, so the old one is deleted rather than kept.
The new hook checks only the files in the commit and exits 1; CI runs --all
as the backstop, since a fresh clone that never ran `pre-commit install` has
no hooks at all. The exemption list lives with the checker in
~/utils/file_length/config.py so the gate and the cross-repo survey cannot
disagree about what "too long" means.
Two things this repo has that ~/todo (the reference implementation) did not:
- A pre-commit CI job running --all-files, where $HOME/utils does not exist.
The shared gate is checked out to .utils and reached via UTILS_ROOT, or the
hook fails on a missing checker rather than on anything in this repo.
- Tests that isolate live user state with dotted-string patches
(`patch("diet_guard._state.FOOD_LOG_FILE", ...)`). unittest.mock.patch fails
OPEN: once a refactor moves a name, the old path still imports, the patch
redirects nothing, the test still passes -- and the suite writes to the real
~/.local/share/diet_guard, which diet-guard-sync.timer publishes within 15
minutes. check_patch_targets.py resolves all 30 patch targets statically so
that failure is loud instead of silent. It is landed before any split for
exactly that reason.
The gate is red at 52 files; the splits that follow drive it to zero.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MK3HCZrM75sRHL1gL8usve
|
|||
| 7a491d9d91 |
app: use the shared github_device_auth package
The inline `_DeviceCodeDialog` in `github_mirror_screen.dart` (88 lines) was byte-for-byte identical to wake-alarm's, and `services/github_device_auth.dart` was a fourth copy of the auth client. Both now come from `github_device_auth` in the kuhyx/utils monorepo. This app's copy was the one that mattered most to get right: it took the device-code and token URLs as parameters because GitHub's device-flow endpoints send no CORS headers, so the desktop **web** build has to route both through the local wrapper (`github_client_factory_web.dart` passes them). Extracting todo's simpler hardcoded version would have broken that build outright. The package carries the configurable endpoints instead, defaulting to GitHub's own URLs so the other three consumers are unaffected -- and `flutter build web` here is verified green, which is the check that would have caught it. The dialog also gains a real fix: `on Object` rather than `on Exception`, so an `ArgumentError` shows an error instead of leaving the dialog spinning on "Waiting for authorization…" forever. The unused `token_vault` import in the deleted client confirmed it had no app-specific behaviour left worth keeping. 548 tests pass, analyze clean, web build green, and the release APK is installed on the phone with meal history intact. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01U4Rj3s7K2qzrLNgJqqPhno |
|||
| b621ccaed0 |
Use gatelock's shared button and WidgetGroup
Phase 2 consumer migration. diet-guard was the donor for make_button, so it
is one of the two proof consumers the extraction is validated against.
- _gatelock_buttons.py is deleted; its make_button now lives in gatelock,
where the variant API (text colour picked *from* the fill) and the
<Return>/<KP_Enter> bindings serve all four gates instead of one. Call
sites pass _COLORS explicitly, since a shared widget cannot read this
app's module-level palette. Pixel-identical: BODY/LABEL were -16/-14 and
LockConfig.font("body"/"label") yields the same negative (pixel) sizes.
- WidgetGroup now subclasses gatelock's, keeping the list[_W] constructor and
re-narrowing `first` to the widget type. The specialized groups (EntryGroup
over a shared StringVar, TextGroup, ListboxGroup, MacroGroup) are unchanged
behaviour and stay -- gatelock has no equivalent for them.
- bind() keeps *replacing* semantics, inverted from gatelock's additive
default and now documented + tested. _wire_events runs once per
build_surface and again on rebuild, so an additive bind would stack a
second <Return> handler on every surviving widget and log the meal twice.
- conftest swaps gatelock.widgets into the fake-tk module list in the same
edit that removes _gatelock_buttons, since that list fails the whole suite
if it drifts in either direction.
All three gatelock pins move together to v0.5.0 -- pyproject, requirements.txt
and the pylint hook's additional_dependencies. The config comment already
warned that a lagging hook pin lints against a gatelock without the API the
code calls; that is exactly what it did before this bump.
The "<Return> activates a button" test moves to gatelock with the button, so
it runs against real Tk rather than a fake widget that can only report the
binding it was handed.
Verified: 692 tests, 100% branch coverage against the *installed* gatelock
0.5.0 (not a PYTHONPATH shim); the gate builds under xvfb and <Return> and
<KP_Enter> both fire a real button's command, with the accent focus ring
(#B8862E, 2px) instead of Tk's invisible 1px black.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U4Rj3s7K2qzrLNgJqqPhno
|
|||
| 372e8a19f6 |
Remove the Snack chip from the phone's slot selector
The chip was the only control that logged a meal against no slot at all (`slot: null`). Removing it leaves the row with just the four hour chips, so every logged meal now satisfies a real slot. Storage keeps its null-slot support on purpose. Entries already on disk and arriving over sync carry no `slot` key, and the `slot != null` filters in log_storage_service.loggedSlotsToday / _state.logged_slots_today are what stop them from retroactively satisfying meal slots -- so both are documented as load-bearing rather than deleted as dead code. Also corrects the MCP tool's docstring, which claimed its slot argument "may be None early in the day"; it falls back to slot_for_log, which clamps to a real hour and never returns None. Adds the widget test the chip row never had -- being untested is why the chip read as unused. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MPheLM86xUN9TGf34Ygtfz |
|||
| b5704b2228 |
Update refactor_claude_todo.md counts after gate exemption fixes
Git-ignored files, vendored agent-skill bundles and the CI checkout dir are now exempt, since no commit could ever fix them. Repo counts and the ranked violation lists are regenerated accordingly; the global baseline drops from 657 to 597. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01C7yZz45ezmzCB89Cv5gAtZ |
|||
| a573cc11e0 |
Add refactor_claude_todo.md: 250-line file-length cap
A ready-to-use prompt describing the goal (every file at most 250 lines, code and prose alike), this repo's actual violations ranked by Fowler ROI (lines x commits/yr), how to split each kind, and the requirement to wire in the shared pre-commit gate so files stay small permanently. Generated from a measured survey of every repo; the gate itself lives in ~/utils (file_length/ + scripts/check_file_length.sh). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01C7yZz45ezmzCB89Cv5gAtZ |
|||
| 45471546f7 |
Migrate Sync settings to the shared sync_settings_ui package
Splits the settings screen: Nutrition (daily kcal goal) and Notifications (battery exemption) stay in place, Firebase+GitHub content is replaced by a Sync settings link using the shared sync_settings_ui package. GitHub stays app-local as its own GitHubMirrorScreen (device-flow connect, _ClientIdSetupDialog, the wrapperManagedToken desktop-wrapper path) since connecting it also triggers a real cross-device sync via runSync(), not just a settings save. BackupSlot left null: diet-guard has no local export/import feature. 553/553 tests passing, 100% coverage on settings_screen.dart, flutter analyze clean. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KdSp6Nbrs9xvsWkCMDN9a1 |
|||
| 546041584f |
Add Google sign-in support for the Firebase sync account
Some checks failed
One-tap sign-in for a fresh install, matching the pattern already shipped in todo and crdt_sync_dart: openFirebaseWithGoogle() (google_platform.dart abstracts the plugin's platform-channel dependence), isFirebaseConfigured() that reads the stored session rather than trusting the account marker alone (a marker with no live session is what made a synced phone read as "not connected" for a full session), and storedAccount() for read-back without the desktop-wrapper fallback that throws on Android. Also generalizes crdt_sync_dart's ref pin to v0.10.0 and vendors the override-guard script for the pre-commit hook already wired to it. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KdSp6Nbrs9xvsWkCMDN9a1 |
|||
| 458f10515b |
Make the phone publish on every tick, and fail closed on Firebase errors
Some checks failed
Meals logged on the phone stopped reaching the PC, so the gate kept locking for slots that were already logged and the only way through was to spam "nothing". The PC's fetch was never broken: it was faithfully pulling a Firebase that did not contain the phone's meals. The phone had no working publish backstop on either transport: - `checkAndNotify` gated its sync on `due.isNotEmpty`. Logging every meal promptly means nothing is ever due, so the ~15-min periodic task never published. It was a notification job that happened to sync, not a sync timer. It now syncs on every tick it is asked to, then computes due slots from the merged result, so a meal pulled from another device suppresses a nag instead of triggering one. - `backgroundSyncPush` never called `initSyncDeviceId()`. A fresh isolate has its own static state, so `currentSyncDeviceId` fell back to the compile-time 'phone' constant and published to `devices/phone/` rather than the persisted uuid -- which then makes the next foreground push see `unchanged` and skip writing the uuid directory entirely. Separately, on the "Fetch from sync" path itself: `FirebaseSyncError` and `FirebaseAuthError` are siblings of `GitHubSyncError` under `RemoteSyncError`, not subclasses, so every per-request failure of the *primary* backend escaped `pull_shared_log`'s catch tuple and raised a traceback out of a helper documented to fail closed with a reason string. `ConfigError` needed the same treatment by a different route: it subclasses `Exception` directly, so it is outside `RemoteSyncError` too, and is now translated at `_client_for_run`. The PAT is no longer mandatory either. Firebase is primary, but `_read_token` ran before the client was ever built, so a Firebase-only machine could not sync at all -- the commits that fixed this touched only the Dart side. A stalled sync was invisible: the config gates returned silently and `openFirebase` swallowed every error. `dart:developer`'s `log()` does not reach logcat on a release build (verified on device), so logging alone would not have surfaced it. `SyncHealth` records each tick's outcome and the log screen shows a banner when publishing has actually stopped. Also make the real-Tk probes bypass the window manager. A tiling WM retiles a managed toplevel instead of honouring the requested geometry, so `winfo_height` reported 0/1px and the layout and focus-ring assertions failed on noise rather than on any regression -- 8 failures on the dev machine that only passed under Xvfb. `overrideredirect` makes the measurement deterministic with or without a WM; the probes still detect a genuine overflow at 1366x300. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RT8X32S9yDLW1Xf1PDq8z7 |
|||
| fc9822b516 |
packaging/aur: track the current release tag
Routine follow-up to the per-commit version bump: the clean vX.Y.Z tag moved, so the template's pkgver follows. sha256sums stays 'SKIP' -- the tarball for a tag contains this file, so the real hash can only be filled in by updpkgsums in the AUR checkout after the tag exists. Note this line is inherently a lagging indicator: publishing runs updpkgsums against whatever tag is newest at that moment, so the AUR may be a release ahead of what is written here. ~/utils/aur-publish/publish.sh resolves the tag itself and does not read this value. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Aoa1nKWRrAbowz7Hfd3tgL |
|||
| 4cd8e368b8 |
packaging/aur: sharpen metadata against the AUR submission rules
The AUR does not review uploads, but packages that violate the rules "may be
deleted without warning", so these were audited against the submission
guidelines rather than assumed compliant.
- pkgdesc now says what the app actually does, in terms a stranger can judge.
"Usefulness" is the one rule these packages are genuinely exposed to, and
the old wording led with the implementation detail.
- optdepends lists every browser the wrapper actually probes for. It searched
Thorium and Brave but only advertised Chrome and Chromium; all four names
were checked to resolve in the official repos or the AUR.
Verified compliant on the rules that can be checked mechanically: not in an
official repo, name free in the AUR, x86_64 declared, no replaces= (the AUR
reserves it for renames), Maintainer line present, license installed. The
conflicts=('todo') on todo-flutter is justified, not defensive: AUR 'todo'
2.4-1 installs its own /usr/bin/todo, confirmed by reading its PKGBUILD.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aoa1nKWRrAbowz7Hfd3tgL
|
|||
| 97959e892d |
Note that pre-commit install is required after cloning
This repo had only the pre-push hook wired into .git/hooks, never pre-commit, so every pre-commit-stage hook here silently never ran locally -- including the version bump added in the previous commit, which is why that commit did not bump its own version. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Aoa1nKWRrAbowz7Hfd3tgL |
|||
| 55fade1e15 |
Let the desktop provision its sync account from the wrapper
Same change todo just took, for the same reason: app/'s desktop target is a
Flutter web build in a Chrome --app window, so FlutterSecureStorage resolves
to the web backend (AES-encrypted localStorage, keyed inside the browser
profile). Nothing outside the page can write that store — `secret-tool`
targets libsecret, which only a Linux embedder build would read, and a Dart
CLI cannot even import flutter_secure_storage, since it is a Flutter plugin
that fails to resolve on the VM. Both verified rather than assumed.
The wrapper is the one process that can read the filesystem and serve the
page, which is exactly why it already holds the GitHub token instead of the
browser (see github_proxy.dart). So the sync account now arrives the same
way: loadAccount() falls back to GET /sync-account when the store is empty
and persists the result, making the route a one-shot provisioning step
rather than a standing dependency.
It reads ~/.config/crdt-sync/{firebase.json,password} — the same pair
`diet_guard sync` already uses — so the machine keeps one source of truth.
Off unless CRDT_SYNC_SERVE_ACCOUNT is set, and 404 (not 403) when disabled so
a probe cannot tell the route exists. On Android there is no wrapper: the
request simply fails and loadAccount() returns null exactly as before.
clearAccount() writes an opt-out marker the fallback checks, so Disconnect
cannot be silently undone by the next launch re-adopting the account.
518 tests, analyzer clean, pre-commit clean. Pinned to crdt_sync_dart-v0.8.0.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177xwzcpfpWG2qca8Mr39q9
|
|||
| e23f7ac3b4 |
Push under a persisted per-install uuid, not a fixed role id
diet_guard pushed as "pc" (Python), "phone" (Android) and "desktop" (web). A role constant collides the moment a second machine takes the same role, and after a reinstall the new install inherits the previous one's CRDT identity -- the same reasoning home_inventory already records for choosing a uuid. Both halves now mint a uuid once and persist it: the PC in ~/.local/share/diet_guard/.device_id, the app under SharedPreferences 'crdt.nodeId' (the key todo and home_inventory already use). The old constant survives as the legacy id and is passed to sync_log / syncLog, so devices/<legacy>/ is skipped as this device's own. Without that every tick would re-download and re-merge this device's own pre-migration log as though a peer had written it -- idempotent under LWW, but hundreds of KB, 96 times a day. It drops to None once that path is reclaimed; a test covers both states, including a negative control proving the skip is the legacy id's doing. All four documents move together (food_log, food_bank, food_bank_manual, budget), and the hist:<date> fields riding on the budget record are untouched -- merge_record unions field names, so they relay through unchanged. The resolver lives in its own module (_device.py / sync_device_id.dart) because _sync_merge needs it for HLC stamping too and importing _sync there would be a cycle. Dart resolves it asynchronously at startup, before LogStorageService.init(); currentSyncDeviceId falls back to the compile-time role constant until then, so a too-early Hlc stamp gets a valid id rather than crashing. conftest redirects the new id file in the same change that introduces it -- without that a test mints a uuid into the real state dir and this machine's live sync identity is decided by whichever test ran first. Verified by checking ~/.local/share/diet_guard/ before and after: untouched. Verified live, not just against mocks: the sync timer ran mid-change and migrated this machine to f8f46da6. All 358 food_log records and all 100 food_bank records are present under the new path (0 missing vs devices/pc/), and the new log's HLCs carry only its own id -- confirming it did not re-merge the old path as a peer. Python: 687 tests, 100% branch coverage. App: 518 tests, analyzer clean. Pins bumped to crdt-sync-v0.6.0 / crdt_sync_dart-v0.7.0 (pyproject, requirements.txt, .pre-commit-config.yaml, pubspec), and the new library is installed into /usr/bin/python's user site-packages so the production timer does not ImportError on its next tick. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GZH89WEqAjuJT8WZdqc7AP |
|||
| da0b54d886 |
Sync meals and the food bank through Firebase, mirroring to GitHub
The largest consumer moves last on purpose: diet_guard was 71% of all sync traffic, and both its surfaces (the PC timer and the phone app) share one prefix, so they move together. Firebase becomes the primary backend when it is set up, with GitHub kept as a mirror so a device that has not moved yet still converges. An unconfigured device keeps syncing exactly as before, which is also the rollback. Revision tracking is new here. The PC hand-rolled its own pull-merge-push instead of calling sync_log, so it had none: every tick re-downloaded every peer's whole food log -- hundreds of KB, 96 times a day -- and re-pushed its own regardless of change. It now reads one small revision map first, skips any peer whose hash is unchanged, and suppresses a no-op push. Every sub-sync (log, budget, food bank, manual bank) takes the client as a parameter, so one swap covers all four. The app could not have reached Firebase at all: nothing called saveAccount(), so loadAccount() always returned null and openFirebase() always returned null. Settings now has a Firebase section that stores the account in the OS keystore and signs in immediately, so a typo surfaces on the screen where it can be fixed rather than as a silently failed background sync hours later. The email and password never touch the repo -- it is public. Platform reaches now degrade instead of failing: an unavailable keystore or application-support directory costs one tick of extra traffic, where before it would have taken sync down entirely. Caught by `on Object` rather than `on Exception`, because an uninitialised binding raises an Error. Verified end to end against the real database, not just in tests: a live PC sync merged 57 days / 339 entries and put 221 KB of food log plus 97 food-bank records into Firebase; a second unchanged tick issued zero pushes; and the Dart client signed in and read back all 339 meals and 97 foods, then completed a push / publish-revision / suppress-no-op round trip under a throwaway prefix. diet_guard: 618 tests at 100% branch coverage. diet_guard_app: 477 tests. Two assertions moved from 4 pushes to 5 -- the extra one is this device's revision, published after the log so a peer can never cache "seen rev X" against a log it never received. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SJ9sxEw3ymzXNjL7SHNpJc |
|||
| f7f06aee53 |
Remove unused features; fix reminder false alarms; share all state
Four asks, plus the fixes two review passes turned up. Removals (all unused): - "Repeat last meal" button, and the reward/temptation-bundling prompt it was the sole trigger for. Replaced with a post-log progress card showing kcal against budget, macros, and the adherence streak. - The multi-item meal builder, on both the gate and the phone. The stored `components` field stays: nothing writes it now, but historical composite entries and the food bank still read it and it is part of the wire format. - Meal photos entirely: 13 files, `imagePath`, the photo filter, the wrapper's /blobs/ route, image_picker, and the CAMERA permission. Reminder false alarms had three real causes, all fixed: - Logging never reconciled notifications, so a reminder sat on screen up to 15 minutes after the meal was logged -- on the phone itself. - The background check never pulled, so a PC-logged meal nagged forever until the app was opened. Now mirrors _cli_gate._should_lock: cheap local check, network only when a slot looks due, then re-check. - Meals before 08:00 / after 22:00 were attributed to no slot at all. New slot_for_log/slotForLog clamps them to the first/last slot, byte-identical across Python and Dart. Deliberately separate from elapsed_slots, which would otherwise make every slot fall due at 23:00. Budget history, so lowering the budget stops rewriting the past: - Forward-only (effective_from, kcal) entries; each day is judged against the budget in force then. Verified live: setting 2000 left a 36-day adherence streak and the whole calendar pixel-identical. - Rides as hist:<date> fields on the existing budget record. crdt_sync merges per-field over the union of field names and both devices push the merged log, so a device that predates the feature relays them untouched -- no coordinated rollout, no second document. - The seed guard tests emptiness, not file presence: _sync can write an empty history after merging with a pre-feature peer, and a presence check would then never seed again, silently reclassifying every past day. One shared source of truth for every piece of data: - Body weight now travels as its own `weight` CRDT field. Inside `value` it was collateral damage of whole-map LWW -- any phone budget edit deleted it, and the protein target with it. - Both halves of the food bank sync. The curated half (foods added without eating them) was the last device-local state. The derived half merges with count as the clock, so LWW means max-count-wins; the log stays authoritative for membership, because a CRDT union never shrinks and a peer's stale copy would otherwise resurrect a deleted food permanently. - Bank adapters honour tombstones, and Dart parses bank records defensively: a cast failure there is an Error, not an Exception, so one malformed remote record would have broken phone sync permanently. _test_guard.py blocks any pathlib write to real user state while pytest is in the process, whatever conftest is loaded. A throwaway test run outside the package conftest destroyed a real GitHub token during this work; this makes that class of accident impossible rather than merely discouraged. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
