digital-wellbeing e2a7176 removed the blocked-keyword, white and grey
lists. check_pacman_wrapper no longer looks for them, the VirtualBox note
stops citing pacman policy, and the docs drop the lists and greylist
challenge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016Lhzv7c391mTKWfwU17V7Z
kuhy: "I do not want it to work like this, I want it to just work
normally." PS4 mode (046D:C260) cannot be supported on this PC (no kernel
driver, SDL lg4ff has no c260 either, so FFB is dead there too) and the
selector is physical. Keep the mode detection so the journal and --status
name PS4 mode instead of "not found"; drop the desktop notification and
the 5-minute Restart loop.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NVfC2T6DyvCFqse9A99zef
On the 2026-09-15 and 2026-09-17 boots the wheel enumerated as 046D:C260
(PS3/PS4 selector in PS4 position, bound by hid-generic). The BPF udev
rule, the ensure unit and its hotplug rule all keyed on C24F, so the unit
failed once with "no G29 found" and nothing was said; 1st/3rd stayed on
the firmware's bad decode until the selector was flipped a day later.
- fixes/g29_wheel_mode.sh (new, sourced): classify the HID bus as
native/ps4/compat/absent; root-safe desktop notification via
/run/user/*/bus + sudo -u.
- --ensure: absent -> exit 0; ps4/compat -> exit 1 + critical
notification; native -> attach. --status prints the mode first.
- g29-shifter-bpf.service: Restart=on-failure, RestartSec=5min so a
notification lost before the session bus exists at boot is re-sent.
- 99-g29-shifter-ensure.rules: also fires on C260.
- tests/test_fix_g29_shifter.bats: 13 tests against a fake sysfs tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NVfC2T6DyvCFqse9A99zef
Live on this host since 2026-09-11 but never committed. The wheel firmware
decodes the shifter's hall sensor itself and this unit's top row rests at
Y 180-193, below the ~195 engage threshold, so 1st/3rd often did not
register. g29_shifter.bpf.c re-decodes those two gates from the raw X/Y
bytes with hysteresis (engage >= 160, release <= 140) and ORs the bit in
before hid-logitech parses the report; it never clears a bit, so the
firmware's working gates cannot regress. fix_g29_shifter.sh builds,
attaches and installs it persistently (udev-hid-bpf rule + a systemd
safety-net unit pulled in on every re-enumeration); g29_shifter_capture.py
records and grades raw captures per gate.
Two files were over the 250-line cap: the test file is split at the
record/CLI boundary with the report builders moved into a conftest fixture
(the naming hook allows only test_*.py in tests/), and the grader's
docstrings are tightened. No behaviour change to the installed fix.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SS8M5wk88nJTXxDWz61KKk
BeamNG.drive 0.39 native lost G29 FFB because SDL3's HIDAPI lg4ff driver
advertises an effect-status query it cannot answer (12,201 failures per
session in beamng.log). DOCS-g29-ffb.md records the diagnosis, the narrow
SDL_JOYSTICK_HIDAPI_LG4FF=0 hint vs the broad one, and the launch-option
%command% bug that had gamemoderun passed as a game argument.
install_new_lg4ff.sh swaps the in-tree hid-logitech for new-lg4ff via DKMS
(dkms.conf installs it under the same name in updates/dkms/), regenerates
initramfs presets that bundle the module, and offers --status/--revert.
Passed install/status/revert in vmbox; host run pending.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SS8M5wk88nJTXxDWz61KKk
Also bumps the 16 meta/requirements pins the freshness gate flagged
(anthropic 1.5.0, numpy 2.5.3, pytest-randomly 5, flake8-bugbear 26.9.9,
ruff 0.16.7, pyright 1.1.414, selenium 4.49.0, hypothesis 6.168.0, lxml
6.1.3, pipdeptree 4.2.5, the two types-* stubs) and Flutter 3.47.3 in
meta/.fvmrc. One test still expected the pre-move ~/mcp-servers path.
The pre-commit hook fed .zsh files to shfmt and shellcheck, neither of
which parses zsh (SC2148/SC1071), so no zsh file could be committed since
the hook was tightened on 2026-08-22; those now get `zsh -n` instead. The
hook's own shfmt pass also staged its reformat of 8 shell files.
CI_GREEN_SKIP because main is red on exactly the dependency-freshness
finding this commit fixes, which is the documented use of that flag.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AwtowrowDXx6ccmWVPkCaF
Renames this repo's markdown onto README.md / CLAUDE*.md / DOCS*.md /
TODO*.md so a future session can tell a live task from a finished
record without reading the file to find out.
TODO files carry the literal "REMOVE ME AFTER FINISH" and are deleted
when the work lands. Enforced by the md-naming pre-commit hook and CI
workflow, both delegating to the shared gate in kuhyx/utils so this
repo's idea of a valid name cannot drift from every other repo's.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A47aX5DJwmA3QFn3pkEWi7
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.
Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.
The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:
- 52 relative `source` lines for lib/common.sh and lib/android.sh. The
correct prefix differs per file: 40 were ../../ and 12 were ../../../,
so a blanket replace would have fixed one set and broken the other.
- REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
each walking up four levels from a directory now two levels shallower.
This caused a real regression -- the fixes suite went red with
"log_warn: command not found" -- caught by running it and comparing
against the pre-move baseline worktree.
- conftest.py's sys.path entries, which took the pytest gate down with
14 collection errors, and the `# shellcheck source=` directives, which
took shellcheck down with SC1091.
16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.
Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
prettier only runs on pre-push, so the split commit passed the per-file
gate and then failed the push. Both files stay under the cap.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011w2Pj4Ek3ZNMQVYcFHgXDY
Twelve prose violations to zero. Eight files split into per-topic
subdirectories with the original left as an index; both SKILL.md files
keep their frontmatter so discovery still works, with detail moved to
references/.
Deleted docs/cleanup-2026-05/ (7 files) and linux_configuration/docs/
VERIFICATION.md on the user's ruling: unreferenced records of finished
work whose rules are now enforced by the polling, shellcheck and shfmt
hooks. PACMAN_WRAPPER_SECURITY.md was split instead - unlike those, it
documents live guarantees.
Every split verified by a sorted diff against HEAD: zero content lines
lost, only the new headings and index links added.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011w2Pj4Ek3ZNMQVYcFHgXDY
- Move all linux_configuration scripts into two semantic categories:
- single_use/: scripts run once manually (fresh install, fixes, setup)
- periodic_background/: scripts run by systemd timers or daemons
- Preserve existing subdirectory structure within each category
- Fix lib/common.sh source paths for new directory depths
- Fix CONFIG_DIR depth in setup_periodic_system.sh and check_and_enable_services.sh
- Update all references in tests, fresh-install/main.sh, nix modules, and docs
- Fix check_polling_antipatterns.sh false positives (||, regex |, case patterns, jq strings)
- Fix pre-existing mypy exclusion path and type annotations for moved tools/ directory
- Rewrite check_polling_antipatterns.sh using awk (no bash regex loops); add require_serial: true
