Commit Graph

20 Commits

Author SHA1 Message Date
1ea94e142c lan blocker: gateway mode, WARP drop with a Mon/Fri 09:00-15:30 window
Gateway mode routes LAN devices through the PC: forced DNS, DoH/DoT
dropped. The work laptop still bypassed it through Cloudflare WARP, so
the WARP ingress is dropped too. warp_window.sh opens it for the LAN
only Mon/Fri 09:00-15:30 (nft set with a timeout to 15:30), asked for
over a forced-command key by warp_home.sh, which keeps WARP off at home
otherwise because WARP fails closed. Also: dnsmasq upstreams, AAAA
filtering, DoH canary, and extracted_repo_dir resolving ~/src first
(the nightly blocklist refresh had failed since 2026-09-11).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019C8pdLR4MePsLocE1pWz7F
2026-10-25 09:52:40 +01:00
213e16836d redeploy_agent_ready_sites: parallel checks with the checker's own budget
--verify-only flaked FAIL on all three sites: CHECK_TIMEOUT=10 killed
checks that take 2-22 s. The url checks now run concurrently, each with
--budget min(45, time left before a 55 s run deadline - 5 s grace); the
outer timeout is only a hang backstop. The redeploy steps run
concurrently too (systemctl restart now under a timeout), so a full run
fits 60 s worst case. --help prints only the header block.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NBScELfMUiieK9ManFbS3Y
2026-10-22 21:36:48 +02:00
2a76d05f9d Static-site Caddies: shared AgentReady site block, serve redeploy, verify
static_site_caddy.sh is the one site-block body for the personal website
and kcd2 dice Caddies: prerendered paths, real 404s and the ai-catalog Link
header instead of an SPA catch-all. Both setup scripts gain a sudo-free
`serve` that recreates only their container; kcd2's readiness wait needs a
200. redeploy_agent_ready_sites.sh serves both, restarts the popes site and
runs the AgentReady checker against all three public URLs. Tested by
test_static_site_serve.sh, test_redeploy_agent_ready_sites.sh and the
caddy:2.8 e2e_agent_ready_caddy.sh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NBScELfMUiieK9ManFbS3Y
2026-10-22 21:23:59 +02:00
7b06fc3c4a refactor(dot-resolver): install the tracked sync-dot-cert.sh instead of generating it
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (mypy, mypy) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (pylint, pylint) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (rest, ) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (shellcheck, shellcheck) (push) Waiting to run
repo-contract / repo contract (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / lib-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
Every script under /usr/local/bin must be a repo file. install_cert_sync
wrote /usr/local/bin/sync-dot-cert.sh from a heredoc with the domain,
Caddy container and cert dir baked in. The script now lives at
linux_configuration/scripts/sync-dot-cert.sh, takes those three as
arguments (defaults = the installer's constants), and is installed with
install -m 755. dot-cert-sync.service and the first sync pass the
arguments, so --domain reaches the timer too. Test asserts the installed
file is the tracked one byte for byte and runs the script itself against
a docker shim (reload only on change).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014yhTkYV6ZeuAbQYvykFGFc

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-11 19:32:54 +02:00
8be1fac8f9 linux_configuration: track ~/.local/bin wrapper scripts in repo, symlink instead of generating
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (mypy, mypy) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (pylint, pylint) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (rest, ) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (shellcheck, shellcheck) (push) Waiting to run
repo-contract / repo contract (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / lib-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
Moves 7 loose ~/.local/bin scripts into linux_configuration/scripts/ and
tracks the flutter/dart git-env wrapper; fix_flutter_git_env.sh and
unreal_mcp_repo.sh now symlink to the tracked files instead of writing
heredocs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014yhTkYV6ZeuAbQYvykFGFc

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-11 18:49:56 +02:00
b8d0b215e1 wg firewall: the workout poke moves to tcp/8774 (8773 is book-guard's desktop wrapper); applied on the host 2026-10-10, phone reaches 8774 over the LAN
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (mypy, mypy) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (pylint, pylint) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (rest, ) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (shellcheck, shellcheck) (push) Waiting to run
Python tests / test (push) Waiting to run
repo-contract / repo contract (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / lib-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KrBEzjPRdx5oyp8NtTLW5F
2026-10-10 09:57:29 +02:00
20e05f021f wg firewall: allow-workout-poke opens tcp/8773 from the LAN only (ALLOW_WORKOUT_POKE)
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (mypy, mypy) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (pylint, pylint) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (rest, ) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (shellcheck, shellcheck) (push) Waiting to run
Python tests / test (push) Waiting to run
repo-contract / repo contract (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / lib-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
screen-locker's workout-poke.service takes the phone's POST of a finished
workout on tcp/8773. The flag is persisted like ALLOW_DOT so every re-apply
keeps it, and there is deliberately no wg0 rule: off the home LAN the poke
fails fast and the normal sync credits the workout instead.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018RHwVPyiiQMPh4M3JQwQku
2026-10-09 18:47:21 +02:00
038017d9eb wg firewall: replace only inet filter (no docker restart), persist DoT 853 via ALLOW_DOT
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (mypy, mypy) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (pylint, pylint) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (rest, ) (push) Waiting to run
Pre-commit checks / pre-commit (${{ matrix.group }}) (shellcheck, shellcheck) (push) Waiting to run
Python tests / test (push) Waiting to run
repo-contract / repo contract (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / lib-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cqv4ckcaStUFpUkcJKmmNz
2026-10-04 21:16:16 +02:00
deaf3ba80a DNS: dnsmasq bind-dynamic, no ordering cycle, stunnel Wants=; retire pc_startup check; repo paths under ~/src
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-10-02 18:02:44 +02:00
07810fb270 Home Assistant setup + allow-homeassistant firewall option (Viomi V3 LAN control)
setup_homeassistant.sh runs a digest-pinned Home Assistant container with
host networking and installs hass-xiaomi-miot v1.1.5, so the Viomi V3
(viomi.vacuum.v13) is controllable over the LAN from the HA companion app.
setup_wireguard_ssh.sh gains a persisted ALLOW_HOMEASSISTANT flag that opens
tcp/8123 to the LAN subnet and wg0 only. Prunes the oldest evidence file to
stay under the 60-file cap.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CGnk48tUeJteJWEQ7UhKDd
2026-09-27 17:12:22 +02:00
f15f00f3fe Re-point paths for the ~ reorganisation (home-tidy)
Also bumps the 16 meta/requirements pins the freshness gate flagged
(anthropic 1.5.0, numpy 2.5.3, pytest-randomly 5, flake8-bugbear 26.9.9,
ruff 0.16.7, pyright 1.1.414, selenium 4.49.0, hypothesis 6.168.0, lxml
6.1.3, pipdeptree 4.2.5, the two types-* stubs) and Flutter 3.47.3 in
meta/.fvmrc. One test still expected the pre-move ~/mcp-servers path.

The pre-commit hook fed .zsh files to shfmt and shellcheck, neither of
which parses zsh (SC2148/SC1071), so no zsh file could be committed since
the hook was tightened on 2026-08-22; those now get `zsh -n` instead. The
hook's own shfmt pass also staged its reformat of 8 shell files.

CI_GREEN_SKIP because main is red on exactly the dependency-freshness
finding this commit fixes, which is the documented use of that flag.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AwtowrowDXx6ccmWVPkCaF
2026-09-11 20:50:19 +02:00
0cea82cab5 feat: the nftables drift check now runs itself at boot
`verify` gated on the two invariants whose breach cut every bridged
container off the internet on 2026-08-29 and again after the 2026-08-30
reboot -- but nothing invoked it, so it reported drift only when a human
thought to ask, and the outage it exists for is exactly the one nobody
thinks to ask about.

nftables-drift.service now runs it after nftables.service, docker.service
and network-online.target at every boot, plus a daily Persistent timer. A
breach is a failed unit in `systemctl --failed`, not a log line: a
self-check that detects a failure has to gate, not warn.

Proven in ~/utils/vmbox across two real reboots -- drifted /etc leaves the
unit failed with the diff and the missing docker0 accept in its journal,
matching /etc leaves it active with no false positive -- then installed and
run green on the host. Not yet observed across a host reboot.

Also bumps the gatelock pin to v0.7.3, which is what turned main's
dependency-freshness job red; CI_GREEN_SKIP is set because this commit is
that fix.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015d48t4qsQLBJnDwDeo2Nom
2026-08-30 15:49:12 +02:00
89a44b58b2 feat: gate on nftables drift so the docker cut-off cannot come back silently
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
The forward-chain fix from 334c0cd9 only ever reached the live ruleset by
hand; /etc/nftables.conf kept the bare default-drop chain, so the next
reboot cut every bridged container off again and the Signal bot went deaf
a second time. Nothing compared generated against persisted.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-30 14:56:24 +02:00
334c0cd904 fix: stop the wireguard firewall from silently cutting every container off
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
`write_nftables_ruleset` emitted a forward chain with `policy drop` and no
rules at all. That chain runs at the same netfilter hook as Docker's own
DOCKER-USER/DOCKER-FORWARD chains, so it vetoed them: every bridged
container lost outbound networking while the host itself stayed online, so
nothing looked broken.

It cost the Signal bot three silent hours today. signal-cli lost its
connection to Signal at 15:32:50 and looped on reconnect for 2.5h, while
the bot kept answering /healthz with 200 -- `/v1/groups` still served from
local state, so every surface said healthy.

`flush ruleset` also deletes Docker's own tables, and dockerd only rebuilds
them on its next network event, so restore_docker_rules() now restarts
docker right after a successful apply.

Verified in vmbox (Arch guest, docker installed, alpine probe):
BASELINE=reachable -> OLD=blocked -> NEW=reachable, sshd active throughout.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KbjfWdAyHbCubac7wJKJZW
2026-08-29 18:34:25 +02:00
ce33c935e4 Run the website's post editor as a loopback unit, no Caddy route
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
2026-08-29 17:50:03 +02:00
61abbf8cf9 Force-recreate the website container so config and dist changes apply
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
Two failure modes compose cannot see, both of which report a healthy
container while it serves 404s:

  1. The Caddyfile is a bind mount, so its contents are not in the config
     hash compose compares. Editing it changes nothing observable, compose
     says Running, and the new directives never load.
  2. A bind mount resolves once, at start. Replacing dist/ rather than
     emptying it leaves the container on the old unlinked inode: /srv reads
     empty and every request 404s.

Hit both at once on a real deploy today -- the container was Up 6 hours,
Caddy logs clean, /srv empty, curl 404. Reproduced by rm -rf dist (inode
84695030 -> 84695031) and fixed by the patched function in one run.

wait_for_website also stops using curl -sf, which collapses every non-2xx
into the same "did not become reachable". It now reports the status it saw,
because unreachable and answering-404 are different bugs and the message
named only the first.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A7BaCSV8FEtcNgVDVsRAJj
2026-08-29 16:35:30 +02:00
516acc243f Serve prerendered blog posts, not the SPA shell, from the website container
Some checks are pending
dependency freshness / dependencies on newest stable (push) Waiting to run
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
The personal-website repo now prerenders each post to
dist/blog/<slug>/index.html. Caddy try_files does not resolve a directory
to its index on its own, so with the single-term directive every post URL
fell through to the SPA shell: right content once React booted, wrong
<title>, and no link preview. Verified against caddy:2.8 in Docker both
ways before and after.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A7BaCSV8FEtcNgVDVsRAJj
2026-08-29 16:19:28 +02:00
924630c029 Run SyncYomi from the local fork build and stop clobbering the Caddy edge
Some checks are pending
md-naming / markdown naming convention (push) Waiting to run
Pre-commit checks / pre-commit (push) Waiting to run
Shell tests / shell-tests (push) Waiting to run
Shell tests / arch-tests (push) Waiting to run
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-28 14:44:40 +02:00
f72455662c Extract the hosts blocker into its own repo
linux_configuration/periodic_background/hosts/ is now
github.com/kuhyx/hosts-blocker, cloned at ~/hosts-blocker. Clears 5 of the 46
directory-depth violations; the remaining 41 are all digital_wellbeing, so
--warn stays on the depth hook until that unit moves too.

History was filtered across ALL FOUR paths the unit has lived at (hosts/,
linux_configuration/hosts/, linux_configuration/scripts/periodic_background/
hosts/, and the current one). Filtering on the current path alone would have
preserved 1 commit out of 51 -- the flatten moved it recently, so a naive
single --path silently truncates the history to the flatten commit and still
looks fine in `git log | head`.

No source line changed: all 15 files are byte-identical to the copies removed
here. install.sh already resolved its lib/ via BASH_SOURCE.

The six callers now resolve the checkout through a new shared helper,
linux_configuration/lib/extracted_repos.sh, which reads the invoking user's
home from SUDO_USER's passwd entry rather than $HOME -- several of these
scripts re-exec under sudo, where $HOME is /root. A missing checkout fails
loudly with a clone instruction; it is never a silent skip, which is the
failure mode that left screen-locker's self-repair dead for five months after
the 2026-05-15 reorg.

The live blocker is untouched: /etc/hosts keeps its chattr +i, and the guards
load their plugins from /usr/local/share/guard-lib-plugins/ (byte-identical by
md5), not from a repo path.

Verified: 25 tests pass from ~/hosts-blocker; shellcheck clean on the helper
and all six callers; sudo resolution prints /home/kuhy/hosts-blocker;
test_setup_dns_blocker.sh passes; report_live_state.sh --check is byte-identical
before and after, so no new stale references.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
2026-08-23 20:30:18 +02:00
4f2b0ccdf7 Dissolve linux_configuration/scripts/ and single_use/
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.

Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.

The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:

  - 52 relative `source` lines for lib/common.sh and lib/android.sh. The
    correct prefix differs per file: 40 were ../../ and 12 were ../../../,
    so a blanket replace would have fixed one set and broken the other.
  - REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
    each walking up four levels from a directory now two levels shallower.
    This caused a real regression -- the fixes suite went red with
    "log_warn: command not found" -- caught by running it and comparing
    against the pre-move baseline worktree.
  - conftest.py's sys.path entries, which took the pytest gate down with
    14 collection errors, and the `# shellcheck source=` directives, which
    took shellcheck down with SC1091.

16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.

Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
2026-08-23 18:53:30 +02:00