{ "intent": "Logitech C270 stays at 30 fps in Google Meet (Helium) in low light instead of dropping to ~15 fps and looking laggy.", "scope": [ "linux_configuration/fixes/fix_webcam_c270.sh", "linux_configuration/fixes/99-c270-fixed-framerate.rules", "linux_configuration/tests/test_fix_webcam_c270.bats", "Non-goal: manual exposure lock; auto exposure stays on" ], "changes": [ "udev rule sets exposure_dynamic_framerate=0 on the C270 capture node at every add event", "Installer script with install/--remove/--status; installs v4l-utils if missing" ], "verification": [ { "command": "v4l2-ctl -d /dev/video0 -c exposure_dynamic_framerate=0 (live, Meet open)", "result": "pass", "evidence": "User confirmed Meet video no longer laggy" }, { "command": "vm run c270 'fix_webcam_c270.sh; --status; --remove; --status'", "result": "pass", "evidence": "Rule installed then removed in vmbox, rc=0" }, { "command": "v4l2-ctl -c exposure_dynamic_framerate=1 && sudo udevadm trigger --action=add --settle /sys/class/video4linux/video0", "result": "pass", "evidence": "Host control read back exposure_dynamic_framerate: 0 after simulated plug-in" }, { "command": "bats linux_configuration/tests/test_fix_webcam_c270.bats", "result": "pass", "evidence": "5/5 ok" } ], "risks": [ "Darker, noisier picture in dim rooms (fixed 33 ms max exposure)", "Chromium could start resetting this control in a future version, undoing the rule per stream" ], "rollback": [ "fix_webcam_c270.sh --remove, then replug the camera", "v4l2-ctl -d /dev/video0 -C exposure_dynamic_framerate reads the firmware value again" ] }