testsAndMisc/linux_configuration/periodic_background/digital_wellbeing/lib/nl_commands.sh
Krzysztof kuhy Rudnicki 4f2b0ccdf7 Dissolve linux_configuration/scripts/ and single_use/
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.

Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.

The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:

  - 52 relative `source` lines for lib/common.sh and lib/android.sh. The
    correct prefix differs per file: 40 were ../../ and 12 were ../../../,
    so a blanket replace would have fixed one set and broken the other.
  - REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
    each walking up four levels from a directory now two levels shallower.
    This caused a real regression -- the fixes suite went red with
    "log_warn: command not found" -- caught by running it and comparing
    against the pre-move baseline worktree.
  - conftest.py's sys.path entries, which took the pytest gate down with
    14 collection errors, and the `# shellcheck source=` directives, which
    took shellcheck down with SC1091.

16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.

Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
2026-08-23 18:53:30 +02:00

83 lines
2.7 KiB
Bash
Executable File

#!/usr/bin/env bash
# Helpers sourced by the entry script.
cmd_setup() {
set_actual_user_vars
print_setup_header "Night Lockdown"
ensure_dir "$STATE_DIR"
[[ -f "$STATE_FILE" ]] || echo UNLOCKED >"$STATE_FILE"
write_config
install_enter_script
install_unlock_script
install_unlock_units
install_rgb_off_service
install_i2c_modules
systemctl daemon-reload
enable_service night-lockdown-unlock.timer
enable_service rgb-off.service
echo ""
if verify_install; then
log_ok "Night lockdown installed."
else
log_warn "Night lockdown installed with warnings (see above)."
fi
echo ""
log_info "Next: swap the shutdown action by re-running setup_midnight_shutdown.sh"
log_info " (it must call $ENTER_SCRIPT instead of powering off)."
log_info "Emergency unlock over SSH: sudo $0 unlock"
}
cmd_status() {
local state="unknown"
[[ -r "$STATE_FILE" ]] && state="$(cat "$STATE_FILE")"
echo "Night lockdown state : $state"
echo "lightdm.service : $(systemctl is-active lightdm.service 2>/dev/null || true)"
echo "getty@.service mask : $(systemctl is-enabled getty@.service 2>/dev/null || true)"
echo "autovt@.service mask : $(systemctl is-enabled autovt@.service 2>/dev/null || true)"
echo "unlock timer : $(systemctl is-active night-lockdown-unlock.timer 2>/dev/null || true) / $(systemctl is-enabled night-lockdown-unlock.timer 2>/dev/null || true)"
echo ""
echo "Next unlock triggers:"
systemctl list-timers night-lockdown-unlock.timer --no-pager 2>/dev/null || true
}
cmd_unlock() {
log_info "Emergency unlock: restoring GUI now"
DRY_RUN="" "$UNLOCK_SCRIPT"
echo ""
log_warn "The curfew is still armed: the next 30-min check tick will re-lock."
log_warn "To stay unlocked until morning, register an override (friction by design):"
if [[ -x "$OVERRIDE_MANAGER" ]]; then
local now_h until_str
now_h="$(date '+%Y-%m-%d %H:%M')"
# Next 05:00 boundary (tomorrow if already past 05:00 today).
if [[ "$(date +%H)" -lt 5 ]]; then
until_str="$(date '+%Y-%m-%d') 05:00"
else
until_str="$(date -d tomorrow '+%Y-%m-%d') 05:00"
fi
echo " sudo $OVERRIDE_MANAGER add '$now_h' '$until_str' 'emergency unlock'"
else
log_warn " (override manager not found at $OVERRIDE_MANAGER)"
fi
}
usage() {
cat <<EOF
Night Lockdown — replace the midnight power-off with a GUI lockout that keeps
background servers running.
Usage:
sudo $0 setup Install/refresh the lock+unlock action and morning timer
$0 status Show current lockdown state and timer status
sudo $0 unlock Emergency: lift the lockdown right now (use over SSH)
$0 help Show this help
After 'setup', re-run setup_midnight_shutdown.sh so the scheduled check calls
$ENTER_SCRIPT instead of powering off.
EOF
}