mirror of
https://github.com/kuhyx/testsAndMisc.git
synced 2026-11-10 20:27:02 +01:00
Krzysztof kuhy Rudnicki
4f2b0ccdf7
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.
Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.
The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:
- 52 relative `source` lines for lib/common.sh and lib/android.sh. The
correct prefix differs per file: 40 were ../../ and 12 were ../../../,
so a blanket replace would have fixed one set and broken the other.
- REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
each walking up four levels from a directory now two levels shallower.
This caused a real regression -- the fixes suite went red with
"log_warn: command not found" -- caught by running it and comparing
against the pre-move baseline worktree.
- conftest.py's sys.path entries, which took the pytest gate down with
14 collection errors, and the `# shellcheck source=` directives, which
took shellcheck down with SC1091.
16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.
Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
112 lines
4.0 KiB
Bash
Executable File
112 lines
4.0 KiB
Bash
Executable File
#!/bin/bash
|
|
# Remote SSL setup and the remote install phase.
|
|
#
|
|
# Sourced by raspberry_pi_nextcloud.sh; split out to keep rpi_nc_ssl.sh
|
|
# under the 250-line cap. Sourced rather than run, so it inherits the
|
|
# caller's strict mode and the variables defined above the source line.
|
|
|
|
phase_setup_ssl_remote() {
|
|
log_info "=== Setting up Let's Encrypt SSL via SSH ==="
|
|
|
|
if [[ -z $PI_PASSWORD ]]; then
|
|
die "PI_PASSWORD not set. Run install-remote first."
|
|
fi
|
|
|
|
local pi_ip
|
|
pi_ip=$(discover_raspberry_pi)
|
|
|
|
if [[ -z $pi_ip ]]; then
|
|
die "Failed to discover Raspberry Pi"
|
|
fi
|
|
|
|
# Get DuckDNS credentials if not set
|
|
if [[ -z $DUCKDNS_DOMAIN ]] || [[ -z $DUCKDNS_TOKEN ]]; then
|
|
echo
|
|
log_info "To get auto-trusted HTTPS, you need a free DuckDNS domain."
|
|
log_info "1. Go to https://www.duckdns.org/ and sign in"
|
|
log_info "2. Create a subdomain (e.g., 'myhomecloud')"
|
|
log_info "3. Copy your token"
|
|
echo
|
|
|
|
read -r -p "Enter your DuckDNS subdomain (without .duckdns.org): " DUCKDNS_DOMAIN
|
|
read -r -p "Enter your DuckDNS token: " DUCKDNS_TOKEN
|
|
read -r -p "Enter your email (for Let's Encrypt): " LETSENCRYPT_EMAIL
|
|
fi
|
|
|
|
save_config
|
|
|
|
log_info "Copying script to Pi..."
|
|
sshpass -p "$PI_PASSWORD" scp -o StrictHostKeyChecking=no "$0" "${PI_USER}@${pi_ip}:/tmp/raspberry_pi_nextcloud.sh"
|
|
|
|
log_info "Running SSL setup on Pi..."
|
|
sshpass -p "$PI_PASSWORD" ssh -o StrictHostKeyChecking=no "${PI_USER}@${pi_ip}" \
|
|
"echo '$PI_PASSWORD' | sudo -S DUCKDNS_DOMAIN='$DUCKDNS_DOMAIN' DUCKDNS_TOKEN='$DUCKDNS_TOKEN' LETSENCRYPT_EMAIL='$LETSENCRYPT_EMAIL' bash /tmp/raspberry_pi_nextcloud.sh setup-ssl"
|
|
|
|
local full_domain="${DUCKDNS_DOMAIN}.duckdns.org"
|
|
|
|
log_success "========================================"
|
|
log_success "SSL setup complete!"
|
|
log_success "========================================"
|
|
echo
|
|
log_info "Access your Nextcloud at: https://$full_domain"
|
|
log_info "This works on ALL devices without certificate warnings!"
|
|
}
|
|
|
|
# =============================================================================
|
|
# Remote Installation
|
|
# =============================================================================
|
|
|
|
phase_install_remote() {
|
|
log_info "=== Installing Nextcloud via SSH ==="
|
|
|
|
if [[ -z $PI_PASSWORD ]]; then
|
|
die "PI_PASSWORD not set. Did you run flash script first?"
|
|
fi
|
|
|
|
local pi_ip
|
|
pi_ip=$(discover_raspberry_pi)
|
|
|
|
if [[ -z $pi_ip ]]; then
|
|
die "Failed to discover Raspberry Pi"
|
|
fi
|
|
|
|
log_info "Using Raspberry Pi at: $pi_ip"
|
|
|
|
# Remove old host key if present
|
|
ssh-keygen -R "$pi_ip" 2>/dev/null || true
|
|
|
|
log_info "Copying script to Pi..."
|
|
sshpass -p "$PI_PASSWORD" scp -o StrictHostKeyChecking=no "$0" "${PI_USER}@${pi_ip}:/tmp/raspberry_pi_nextcloud.sh"
|
|
|
|
log_info "Running system configuration on Pi..."
|
|
sshpass -p "$PI_PASSWORD" ssh -o StrictHostKeyChecking=no "${PI_USER}@${pi_ip}" \
|
|
"echo '$PI_PASSWORD' | sudo -S bash /tmp/raspberry_pi_nextcloud.sh configure"
|
|
|
|
log_info "Installing Nextcloud on Pi..."
|
|
auto_generate_nextcloud_password
|
|
save_config
|
|
|
|
log_success "Nextcloud admin user: $NEXTCLOUD_ADMIN_USER"
|
|
log_success "Nextcloud admin password: $NEXTCLOUD_ADMIN_PASSWORD"
|
|
|
|
sshpass -p "$PI_PASSWORD" ssh -o StrictHostKeyChecking=no "${PI_USER}@${pi_ip}" \
|
|
"echo '$PI_PASSWORD' | sudo -S NEXTCLOUD_ADMIN_PASSWORD='$NEXTCLOUD_ADMIN_PASSWORD' NEXTCLOUD_ADMIN_USER='$NEXTCLOUD_ADMIN_USER' bash /tmp/raspberry_pi_nextcloud.sh install-local"
|
|
|
|
log_info "Fixing Nextcloud issues..."
|
|
sshpass -p "$PI_PASSWORD" ssh -o StrictHostKeyChecking=no "${PI_USER}@${pi_ip}" \
|
|
"echo '$PI_PASSWORD' | sudo -S bash /tmp/raspberry_pi_nextcloud.sh fix"
|
|
|
|
log_success "========================================"
|
|
log_success "Remote Nextcloud installation complete!"
|
|
log_success "========================================"
|
|
echo
|
|
log_info "=== Access Information ==="
|
|
log_info "Nextcloud URL: https://$pi_ip"
|
|
log_info "Admin user: $NEXTCLOUD_ADMIN_USER"
|
|
log_info "Admin password: $NEXTCLOUD_ADMIN_PASSWORD"
|
|
log_info "All credentials saved in: $CONFIG_FILE"
|
|
echo
|
|
log_info "=== Trust the certificate ==="
|
|
log_info "Run: $0 install-ca"
|
|
}
|