mirror of
https://github.com/kuhyx/testsAndMisc.git
synced 2026-11-11 19:14:02 +01:00
Krzysztof kuhy Rudnicki
4f2b0ccdf7
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.
Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.
The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:
- 52 relative `source` lines for lib/common.sh and lib/android.sh. The
correct prefix differs per file: 40 were ../../ and 12 were ../../../,
so a blanket replace would have fixed one set and broken the other.
- REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
each walking up four levels from a directory now two levels shallower.
This caused a real regression -- the fixes suite went red with
"log_warn: command not found" -- caught by running it and comparing
against the pre-move baseline worktree.
- conftest.py's sys.path entries, which took the pytest gate down with
14 collection errors, and the `# shellcheck source=` directives, which
took shellcheck down with SC1091.
16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.
Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
123 lines
4.4 KiB
Bash
Executable File
123 lines
4.4 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Tests for lib/bt_audio.sh: _check_connection_health.
|
|
# Split from test_bt_audio.sh for the 250-line cap.
|
|
set -uo pipefail
|
|
|
|
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
# shellcheck source=bt_harness.sh
|
|
. "${SCRIPT_DIR}/bt_harness.sh"
|
|
|
|
# _check_connection_health calls _services_resolved, _verify_audio_sink and
|
|
# _full_adapter_reset_and_connect, all defined in bt_adapter.sh, which
|
|
# fix_bluetooth.sh also sources.
|
|
# shellcheck source=../bt_adapter.sh
|
|
. "${FIXES_DIR}/lib/bt_adapter.sh"
|
|
# shellcheck source=../bt_audio.sh
|
|
. "${FIXES_DIR}/lib/bt_audio.sh"
|
|
|
|
# _record_reset ARGS... — stand-in for the real full-adapter reset.
|
|
_record_reset() {
|
|
printf 'reset_called %s\n' "$*" >>"${DEV}/fixes"
|
|
}
|
|
|
|
# _info_says TEXT — stub bluetoothctl so `_btctl info` returns TEXT.
|
|
_info_says() {
|
|
printf '%s\n' "$1" >"${DEV}/btctl_info"
|
|
_t_stub_stdin bluetoothctl <<'STUB_BODY'
|
|
read -r cmd rest
|
|
[[ "$cmd" == "info" ]] && cat "${LIB_TEST_DEV}/btctl_info"
|
|
# Real bluetoothctl consumes its whole stdin. Draining it here keeps the
|
|
# writing block from taking SIGPIPE partway through, which would silently
|
|
# stop it executing (and reading) the rest of its lines.
|
|
cat >/dev/null
|
|
exit 0
|
|
STUB_BODY
|
|
}
|
|
|
|
# Not connected at all: fails immediately, without probing services.
|
|
bt_reset
|
|
_t_stub sleep 'exit 0'
|
|
_info_says "Device AA:BB:CC:DD:EE:FF
|
|
Connected: no"
|
|
if _check_connection_health "AA:BB:CC:DD:EE:FF" >/dev/null 2>&1; then
|
|
_t_fail "_check_connection_health: expected failure when not connected"
|
|
else
|
|
_t_pass "_check_connection_health: fails when the device is not connected"
|
|
fi
|
|
_t_lacks "$(_t_calls)" "dbus-send" \
|
|
"_check_connection_health: does not probe services when not connected"
|
|
|
|
# Connected with services resolved on the first probe: healthy.
|
|
bt_reset
|
|
_t_stub sleep 'exit 0'
|
|
_info_says "Device AA:BB:CC:DD:EE:FF
|
|
Connected: yes"
|
|
_t_stub dbus-send 'echo " variant boolean true"'
|
|
_t_stub pactl 'echo "42 bluez_card.AA_BB_CC_DD_EE_FF module-bluez5-device.c"'
|
|
if out="$(_check_connection_health "AA:BB:CC:DD:EE:FF" 2>&1)"; then
|
|
_t_pass "_check_connection_health: succeeds when connected with services resolved"
|
|
else
|
|
_t_fail "_check_connection_health: expected success when services resolve"
|
|
fi
|
|
_t_contains "$out" "with A2DP services resolved" \
|
|
"_check_connection_health: reports resolved A2DP services"
|
|
_t_lacks "$out" "Full adapter reset" \
|
|
"_check_connection_health: does not reset the adapter when services resolve"
|
|
|
|
# Connected but services never resolve: three probes, then the full reset,
|
|
# and after the reset they resolve.
|
|
bt_reset
|
|
_t_stub sleep 'exit 0'
|
|
_info_says "Device AA:BB:CC:DD:EE:FF
|
|
Connected: yes"
|
|
: >"${DEV}/dbus_calls"
|
|
_t_stub_stdin dbus-send <<'STUB_BODY'
|
|
n=$(cat "${LIB_TEST_DEV}/dbus_calls" 2>/dev/null || echo 0)
|
|
n=$((n + 1))
|
|
echo "$n" >"${LIB_TEST_DEV}/dbus_calls"
|
|
if ((n > 3)); then
|
|
echo " variant boolean true"
|
|
else
|
|
echo " variant boolean false"
|
|
fi
|
|
exit 0
|
|
STUB_BODY
|
|
_t_stub pactl 'echo "42 bluez_card.AA_BB_CC_DD_EE_FF module-bluez5-device.c"'
|
|
if out="$(
|
|
eval '_full_adapter_reset_and_connect() { _record_reset "$@"; }'
|
|
_check_connection_health "AA:BB:CC:DD:EE:FF" 2>&1
|
|
)"; then
|
|
_t_pass "_check_connection_health: succeeds once services resolve after a reset"
|
|
else
|
|
_t_fail "_check_connection_health: expected success after the adapter reset"
|
|
fi
|
|
_t_contains "$out" "services not resolved (stale HCI link state)" \
|
|
"_check_connection_health: warns about a stale HCI link state"
|
|
_t_contains "$out" "Full adapter reset to fix stale link" \
|
|
"_check_connection_health: applies the full adapter reset fix"
|
|
_t_contains "$out" "resolved after reset" \
|
|
"_check_connection_health: reports services resolving after the reset"
|
|
_t_contains "$(_t_fixes)" "reset_called AA:BB:CC:DD:EE:FF" \
|
|
"_check_connection_health: passes the MAC to the adapter reset"
|
|
|
|
# Services never resolve, even after the reset: the function fails.
|
|
bt_reset
|
|
_t_stub sleep 'exit 0'
|
|
_info_says "Device AA:BB:CC:DD:EE:FF
|
|
Connected: yes"
|
|
_t_stub dbus-send 'echo " variant boolean false"'
|
|
if out="$(
|
|
eval '_full_adapter_reset_and_connect() { _record_reset "$@"; }'
|
|
_check_connection_health "AA:BB:CC:DD:EE:FF" 2>&1
|
|
)"; then
|
|
_t_fail "_check_connection_health: expected failure when services never resolve"
|
|
else
|
|
_t_pass "_check_connection_health: fails when services never resolve after a reset"
|
|
fi
|
|
_t_contains "$(_t_fixes)" "reset_called" \
|
|
"_check_connection_health: still attempts the reset before giving up"
|
|
|
|
echo
|
|
echo "bt_audio (health): ${PASS} passed, ${FAIL} failed"
|
|
((FAIL == 0))
|