testsAndMisc/linux_configuration/periodic_background/i3-configuration/i3/config
Krzysztof kuhy Rudnicki 4f2b0ccdf7 Dissolve linux_configuration/scripts/ and single_use/
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.

Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.

The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:

  - 52 relative `source` lines for lib/common.sh and lib/android.sh. The
    correct prefix differs per file: 40 were ../../ and 12 were ../../../,
    so a blanket replace would have fixed one set and broken the other.
  - REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
    each walking up four levels from a directory now two levels shallower.
    This caused a real regression -- the fixes suite went red with
    "log_warn: command not found" -- caught by running it and comparing
    against the pre-move baseline worktree.
  - conftest.py's sys.path entries, which took the pytest gate down with
    14 collection errors, and the `# shellcheck source=` directives, which
    took shellcheck down with SC1091.

16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.

Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
2026-08-23 18:53:30 +02:00

221 lines
8.0 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#
# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:System San Francisco Display, FontAwesome 8
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8
# Start XDG autostart .desktop files using dex. See also
# https://wiki.archlinux.org/index.php/XDG_Autostart
exec --no-startup-id dex --autostart --environment i3
# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.
# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
exec --no-startup-id nm-applet
# Keep screen awake and unlocked; also treat controller input as activity
exec --no-startup-id bash /home/kuhy/testsAndMisc/linux_configuration/utils/turn_off_auto_idle_screen_shutdown.sh --watch-controller
# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id /home/kuchy/volume_control.sh up
bindsym XF86AudioLowerVolume exec --no-startup-id /home/kuchy/volume_control.sh down
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
# Add a key binding to toggle the microphone
bindsym $mod+m exec --no-startup-id /home/kuchy/linux-configuration/scripts/utils/toggle_mic.sh
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# move tiling windows via drag & drop by left-clicking into the title bar,
# or left-clicking anywhere into the window while holding the floating modifier.
tiling_drag modifier titlebar
# start a terminal
bindsym $mod+Return exec terminator
# scratchpad calculator: floating popup running the live-calc widget (type
# math, results appear as you type; Ctrl-D to close)
bindsym $mod+c exec --no-startup-id /home/kuhy/testsAndMisc/linux_configuration/zsh/calc-popup.sh
for_window [window_role="calc"] floating enable, border pixel 3, resize set 820 px 220 px, move position center
# kill focused window
bindsym $mod+Shift+q kill
# A more modern dmenu replacement is rofi:
# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# switch to workspace
bindsym $mod+1 workspace number $ws1
bindsym $mod+2 workspace number $ws2
bindsym $mod+3 workspace number $ws3
bindsym $mod+4 workspace number $ws4
bindsym $mod+5 workspace number $ws5
bindsym $mod+6 workspace number $ws6
bindsym $mod+7 workspace number $ws7
bindsym $mod+8 workspace number $ws8
bindsym $mod+9 workspace number $ws9
bindsym $mod+0 workspace number $ws10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number $ws1
bindsym $mod+Shift+2 move container to workspace number $ws2
bindsym $mod+Shift+3 move container to workspace number $ws3
bindsym $mod+Shift+4 move container to workspace number $ws4
bindsym $mod+Shift+5 move container to workspace number $ws5
bindsym $mod+Shift+6 move container to workspace number $ws6
bindsym $mod+Shift+7 move container to workspace number $ws7
bindsym $mod+Shift+8 move container to workspace number $ws8
bindsym $mod+Shift+9 move container to workspace number $ws9
bindsym $mod+Shift+0 move container to workspace number $ws10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape or $mod+r
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "default"
}
bindsym $mod+r mode "resize"
# class border bground text indicator child_border
client.focused #6272A4 #6272A4 #F8F8F2 #6272A4 #6272A4
client.focused_inactive #44475A #44475A #F8F8F2 #44475A #44475A
client.unfocused #282A36 #282A36 #BFBFBF #282A36 #282A36
client.urgent #44475A #FF5555 #F8F8F2 #FF5555 #FF5555
client.placeholder #282A36 #282A36 #F8F8F2 #282A36 #282A36
client.background #F8F8F2
bar {
status_command i3blocks
colors {
background #282A36
statusline #F8F8F2
separator #44475A
focused_workspace #44475A #44475A #F8F8F2
active_workspace #282A36 #44475A #F8F8F2
inactive_workspace #282A36 #282A36 #BFBFBF
urgent_workspace #FF5555 #FF5555 #F8F8F2
binding_mode #FF5555 #FF5555 #F8F8F2
}
}
bindsym $mod+d exec "dmenu_run -nf '#F8F8F2' -nb '#282A36' -sb '#6272A4' -sf '#F8F8F2' -fn 'monospace-10' -p 'dmenu%'"