testsAndMisc/linux_configuration/periodic_background/i3-configuration/i3blocks/gpu_monitor.sh
Krzysztof kuhy Rudnicki 4f2b0ccdf7 Dissolve linux_configuration/scripts/ and single_use/
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.

Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.

The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:

  - 52 relative `source` lines for lib/common.sh and lib/android.sh. The
    correct prefix differs per file: 40 were ../../ and 12 were ../../../,
    so a blanket replace would have fixed one set and broken the other.
  - REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
    each walking up four levels from a directory now two levels shallower.
    This caused a real regression -- the fixes suite went red with
    "log_warn: command not found" -- caught by running it and comparing
    against the pre-move baseline worktree.
  - conftest.py's sys.path entries, which took the pytest gate down with
    14 collection errors, and the `# shellcheck source=` directives, which
    took shellcheck down with SC1091.

16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.

Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
2026-08-23 18:53:30 +02:00

94 lines
2.4 KiB
Bash
Executable File

#!/bin/bash
# i3blocks GPU monitor, persist mode.
#
# Keeps a single long-lived `nvidia-smi --loop=5` (or reads amdgpu sysfs
# in a blocking-read loop) instead of forking nvidia-smi/lspci/awk/tr/bc
# every interval. No sleep, no polling loop in bash — nvidia-smi's own
# periodic emitter drives updates and we block on `read`.
#
# Configure with `interval=persist` and `markup=pango` in the i3blocks
# config. In persist mode each newline is a separate status update, so
# we emit exactly ONE line (with inline pango markup for color).
set -u
SCRIPT_DIR=${BASH_SOURCE[0]%/*}
[[ $SCRIPT_DIR == "${BASH_SOURCE[0]}" ]] && SCRIPT_DIR='.'
# shellcheck source=persist_common.sh
source "$SCRIPT_DIR/persist_common.sh"
# Nerd Font glyph: display / desktop icon (U+F108).
ICON='🎮'
emit() {
local temp=$1 load=$2 color
if [[ $load == 'N/A' ]]; then
color='#FFFFFF'
elif ((load < 50)); then
color='#50FA7B'
elif ((load < 75)); then
color='#F1FA8C'
else
color='#FF5555'
fi
printf '<span color="%s">%s %s°C, %s%%</span>\n' \
"$color" "$ICON" "$temp" "$load"
}
emit_if_changed() {
local temp=$1 load=$2
if ! i3blocks_update_if_changed_key "gpu_metric" "$temp|$load"; then
return 0
fi
emit "$temp" "$load"
}
# Prefer NVIDIA if present (persist via --loop).
if command -v nvidia-smi >/dev/null 2>&1; then
# One child process for the lifetime of i3blocks; emits CSV every 5s.
nvidia-smi \
--query-gpu=temperature.gpu,utilization.gpu \
--format=csv,noheader,nounits \
--loop=5 2>/dev/null |
while IFS=',' read -r temp load; do
# Strip leading/trailing whitespace using parameter expansion.
temp=${temp## }
temp=${temp%% }
load=${load## }
load=${load%% }
[[ -z $temp || -z $load ]] && continue
emit_if_changed "$temp" "$load"
done
exit 0
fi
# AMD fallback: read sysfs directly; emit once (i3blocks restarts on exit).
amdgpu=''
for d in /sys/class/hwmon/hwmon*/; do
[[ -r ${d}name ]] || continue
read -r n <"${d}name"
[[ $n == amdgpu ]] && {
amdgpu=$d
break
}
done
if [[ -n $amdgpu ]]; then
temp='N/A'
if [[ -r ${amdgpu}temp1_input ]]; then
read -r milli <"${amdgpu}temp1_input"
temp=$((milli / 1000))
fi
load='N/A'
# drm card matching the amdgpu hwmon exposes gpu_busy_percent.
for card in /sys/class/drm/card*/device/gpu_busy_percent; do
[[ -r $card ]] && {
read -r load <"$card"
break
}
done
emit_if_changed "$temp" "$load"
exit 0
fi
printf '<span color="#FF5555">%s No supported GPU</span>\n' "$ICON"