Krzysztof kuhy Rudnicki 7e2d78c7db Add the G29 shifter HID-BPF fix (1st/3rd engage reliably) ... Live on this host since 2026-09-11 but never committed. The wheel firmware decodes the shifter's hall sensor itself and this unit's top row rests at Y 180-193, below the ~195 engage threshold, so 1st/3rd often did not register. g29_shifter.bpf.c re-decodes those two gates from the raw X/Y bytes with hysteresis (engage >= 160, release <= 140) and ORs the bit in before hid-logitech parses the report; it never clears a bit, so the firmware's working gates cannot regress. fix_g29_shifter.sh builds, attaches and installs it persistently (udev-hid-bpf rule + a systemd safety-net unit pulled in on every re-enumeration); g29_shifter_capture.py records and grades raw captures per gate. Two files were over the 250-line cap: the test file is split at the record/CLI boundary with the report builders moved into a conftest fixture (the naming hook allows only test_*.py in tests/), and the grader's docstrings are tightened. No behaviour change to the installed fix. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SS8M5wk88nJTXxDWz61KKk		2026-09-14 22:12:31 +02:00
..
99-g29-shifter-ensure.rules	Add the G29 shifter HID-BPF fix (1st/3rd engage reliably)	2026-09-14 22:12:31 +02:00
g29-shifter-bpf.service	Add the G29 shifter HID-BPF fix (1st/3rd engage reliably)	2026-09-14 22:12:31 +02:00