mirror of
https://github.com/kuhyx/testsAndMisc.git
synced 2026-11-11 17:14:08 +01:00
Krzysztof kuhy Rudnicki
45b56b3e61
raspberry_pi_flash_sd.sh 661 -> 166 and test_boot_repair.sh 315 -> 104. Heredoc positions were checked before choosing seams this time. test_boot_repair.sh is the first linux_configuration script in this effort that could be verified by running it: every case builds a throwaway root in a temp dir and passes --root. 31 passed after the split, and 31 passed from a detached worktree at HEAD - a real baseline comparison rather than trusting the post-split number. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011w2Pj4Ek3ZNMQVYcFHgXDY
19 lines
1.3 KiB
JSON
19 lines
1.3 KiB
JSON
{
|
|
"title": "Split raspberry_pi_flash_sd.sh and test_boot_repair.sh under the cap",
|
|
"objective": "Bring raspberry_pi_flash_sd.sh (661) and test_boot_repair.sh (315) under the 250-line cap, choosing seams that avoid heredocs after the enforce_vbox_hosts failure.",
|
|
"acceptance_criteria": [
|
|
"Both entry scripts and all four new libs are at most 250 lines.",
|
|
"The pre-commit shellcheck hook passes on every touched file, with no new suppression and no disable directive.",
|
|
"No lib sources a sibling; every lib parses under bash -n.",
|
|
"Every seam is chosen outside a heredoc: the heredoc line numbers are listed before picking cut points.",
|
|
"test_boot_repair.sh is a sandboxed fixture harness, so it MUST be run: it has to report the same pass count after the split as a clean worktree at HEAD reports before it.",
|
|
"raspberry_pi_flash_sd.sh is not executed - it writes partition tables to an SD card."
|
|
],
|
|
"out_of_scope": [
|
|
"Executing raspberry_pi_flash_sd.sh or any flashing step.",
|
|
"The seven deferred shell scripts.",
|
|
"Changing what any script does when run."
|
|
],
|
|
"verifier": "meta/scripts/verify_shell_split.sh for both, plus running test_boot_repair.sh and comparing its pass count against the same script run from a detached worktree at HEAD, plus pre-commit run --files and check_file_length.sh."
|
|
}
|