testsAndMisc/linux_configuration/scripts/single_use/features/setup_dot_resolver.sh

#!/bin/bash

# ============================================================================
# Expose the existing dnsmasq blocklist over DNS-over-TLS (port 853).
#
# Why this exists:
#   setup_dns_blocker.sh serves the blocklist over plain UDP/53, which only
#   works on the LAN -- and Android's default "Automatic" Private DNS uses DoH
#   and bypasses it entirely. A phone off the LAN gets no filtering at all.
#   Terminating DoT here lets the phone pin Private DNS to a resolver that
#   applies the blocklist, anywhere, with no root and no VPN slot consumed.
#
# Why stunnel rather than Caddy:
#   DoT is a raw TLS stream, not HTTPS. Terminating it in Caddy needs the
#   `layer4` module, which the stock `caddy:2.8` image does not ship -- that
#   would mean an xcaddy rebuild of a container currently serving five live
#   sites. stunnel does exactly this one job, and it can reuse the Let's
#   Encrypt certificate Caddy already renews, so there is no second ACME
#   client competing for port 80.
#
# Usage:
#   ./setup_dot_resolver.sh [--domain <fqdn>] [--check]
# ============================================================================

set -euo pipefail

SCRIPT_NAME="$(basename "$0")"
readonly SCRIPT_NAME
readonly DEFAULT_DOMAIN="dns.kuhy.duckdns.org"
readonly CADDY_CONTAINER="gitea-caddy"
readonly CERT_DIR="/etc/stunnel/dot"
readonly STUNNEL_CONF="/etc/stunnel/dot-resolver.conf"
readonly SYNC_SCRIPT="/usr/local/bin/sync-dot-cert.sh"
readonly DOT_PORT=853

readonly DEFAULT_BIND="10.8.0.1"

DOMAIN="$DEFAULT_DOMAIN"
# Bind to the WireGuard interface, not 0.0.0.0. An internet-facing DoT
# endpoint is an open resolver: TCP-only so not usable for classic UDP
# amplification, but still someone else's free DNS and a standing attack
# surface. Reaching it over the existing tunnel needs no port-forward and no
# rate limiting, because only configured peers can route to it at all.
BIND_ADDR="$DEFAULT_BIND"
CHECK_ONLY=0

log() { printf '[dot-resolver] %s\n' "$1"; }
die() {
	printf '[dot-resolver] ERROR: %s\n' "$1" >&2
	exit 1
}

usage() {
	cat <<EOF
Usage: $SCRIPT_NAME [OPTIONS]
  --domain <fqdn>   DoT hostname (default: $DEFAULT_DOMAIN)
  --bind <addr>     Address to listen on (default: $DEFAULT_BIND, the
                    WireGuard interface). Use 0.0.0.0 only if you intend
                    to expose an open resolver to the internet.
  --check           Verify an existing install, change nothing
  -h, --help        Show this help
EOF
	exit 0
}

require_tools() {
	# Per repo policy a script installs what it needs rather than telling the
	# user to. pacman is non-interactive here; if that fails we stop rather
	# than silently skipping the dependency.
	local missing=()
	command -v stunnel >/dev/null 2>&1 || missing+=(stunnel)
	command -v openssl >/dev/null 2>&1 || missing+=(openssl)
	if [[ ${#missing[@]} -gt 0 ]]; then
		log "Installing: ${missing[*]}"
		sudo pacman -S --needed --noconfirm "${missing[@]}" ||
			die "could not install ${missing[*]}; run: sudo pacman -S ${missing[*]}"
	fi
}

cert_source_dir() {
	# Caddy stores certs per-domain under its data volume.
	printf '/data/caddy/certificates/acme-v02.api.letsencrypt.org-directory/%s' \
		"$DOMAIN"
}

verify_prerequisites() {
	# A DoT endpoint in front of a resolver that is not running would answer
	# every query with a connection error, which looks exactly like a network
	# fault on the phone. Check first.
	ss -lnu 2>/dev/null | grep -qE '127\.0\.0\.1:53' ||
		die "dnsmasq is not listening on 127.0.0.1:53 - run setup_dns_blocker.sh first"

	docker ps --format '{{.Names}}' 2>/dev/null | grep -qx "$CADDY_CONTAINER" ||
		die "container '$CADDY_CONTAINER' is not running; it owns the certificates"

	local resolved
	resolved="$(getent hosts "$DOMAIN" | awk '{print $1; exit}')" ||
		die "$DOMAIN does not resolve - DuckDNS wildcard missing?"
	log "$DOMAIN resolves to $resolved"

	# Binding to an address that does not exist yet makes stunnel fail at
	# start with an opaque error, so check before installing anything.
	if [[ "$BIND_ADDR" != "0.0.0.0" ]]; then
		ip -brief addr show 2>/dev/null | grep -q "$BIND_ADDR" ||
			die "$BIND_ADDR is not assigned to any interface - is wg0 up?"
		log "Binding to $BIND_ADDR (reachable over WireGuard only)"
	else
		log "WARNING: binding to 0.0.0.0 exposes an open resolver publicly"
	fi
}

install_cert_sync() {
	# Caddy renews on its own schedule; stunnel reads files from disk and must
	# be told. A timer copies the current cert out of the container and
	# reloads stunnel only when the content actually changed.
	sudo install -d -m 700 "$CERT_DIR"
	sudo tee "$SYNC_SCRIPT" >/dev/null <<EOF
#!/bin/bash
# Copy the Caddy-managed certificate for $DOMAIN out to stunnel.
# Generated by $SCRIPT_NAME - edit that instead.
set -euo pipefail
src="$(cert_source_dir)"
tmp="\$(mktemp -d)"
trap 'rm -rf "\$tmp"' EXIT
docker cp "$CADDY_CONTAINER:\$src/$DOMAIN.crt" "\$tmp/cert.pem"
docker cp "$CADDY_CONTAINER:\$src/$DOMAIN.key" "\$tmp/key.pem"
cat "\$tmp/cert.pem" "\$tmp/key.pem" >"\$tmp/combined.pem"
if ! cmp -s "\$tmp/combined.pem" "$CERT_DIR/combined.pem"; then
    install -m 600 "\$tmp/combined.pem" "$CERT_DIR/combined.pem"
    systemctl reload-or-restart stunnel-dot.service
    echo "certificate updated for $DOMAIN"
fi
EOF
	sudo chmod 755 "$SYNC_SCRIPT"
}

install_stunnel_conf() {
	sudo tee "$STUNNEL_CONF" >/dev/null <<EOF
; DNS-over-TLS front end for the local dnsmasq blocklist.
; Generated by $SCRIPT_NAME - edit that instead.
foreground = yes
syslog = yes
[dns-over-tls]
accept = $BIND_ADDR:$DOT_PORT
connect = 127.0.0.1:53
cert = $CERT_DIR/combined.pem
; DoT is TLS 1.2+ only in practice; Android requires a publicly trusted cert.
sslVersionMin = TLSv1.2
EOF
}

install_units() {
	sudo tee /etc/systemd/system/stunnel-dot.service >/dev/null <<EOF
[Unit]
Description=DNS-over-TLS front end for dnsmasq blocklist
After=network-online.target dnsmasq.service wg-quick@wg0.service
Wants=network-online.target
Requires=dnsmasq.service
; Binding to the WireGuard address fails if the interface is not up yet.
After=sys-devices-virtual-net-wg0.device

[Service]
ExecStart=/usr/bin/stunnel $STUNNEL_CONF
ExecReload=/bin/kill -HUP \$MAINPID
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

	sudo tee /etc/systemd/system/dot-cert-sync.service >/dev/null <<EOF
[Unit]
Description=Copy the Caddy certificate for $DOMAIN to stunnel

[Service]
Type=oneshot
ExecStart=$SYNC_SCRIPT
EOF

	sudo tee /etc/systemd/system/dot-cert-sync.timer >/dev/null <<EOF
[Unit]
Description=Daily certificate sync for the DoT resolver

[Timer]
OnCalendar=daily
Persistent=true

[Install]
WantedBy=timers.target
EOF
	sudo systemctl daemon-reload
}

open_firewall() {
	# Bound to WireGuard there is nothing to open: the tunnel is already
	# permitted and the listener is not reachable from the LAN or the WAN.
	if [[ "$BIND_ADDR" != "0.0.0.0" ]]; then
		log "No firewall change needed - $BIND_ADDR is WireGuard-only."
		log "No router port-forward needed either."
		return
	fi
	if command -v nft >/dev/null 2>&1 && sudo nft list table inet filter >/dev/null 2>&1; then
		if ! sudo nft list table inet filter | grep -q "dport $DOT_PORT"; then
			sudo nft add rule inet filter input tcp dport "$DOT_PORT" accept ||
				log "WARNING: could not add nftables rule for $DOT_PORT"
		fi
	fi
	log "Ensure your router forwards TCP $DOT_PORT to this host."
}

run_check() {
	local ok=0
	systemctl is-active --quiet stunnel-dot.service ||
		{
			log "FAIL stunnel-dot.service not active"
			ok=1
		}
	ss -lnt 2>/dev/null | grep -qE ":$DOT_PORT\b" ||
		{
			log "FAIL nothing listening on $DOT_PORT"
			ok=1
		}
	# $CERT_DIR is mode 700 and owned by root because it holds a private key,
	# so an unprivileged [[ -s ]] reports "missing" for a file that is
	# present. Test as root, or --check reports a false failure on a healthy
	# install.
	sudo test -s "$CERT_DIR/combined.pem" ||
		{
			log "FAIL certificate missing at $CERT_DIR/combined.pem"
			ok=1
		}
	if command -v kdig >/dev/null 2>&1; then
		kdig +tls "@$BIND_ADDR" -p "$DOT_PORT" +short example.com >/dev/null 2>&1 ||
			{
				log "FAIL DoT query did not answer"
				ok=1
			}
	fi
	[[ $ok -eq 0 ]] && log "OK - DoT resolver healthy on $DOMAIN:$DOT_PORT"
	return "$ok"
}

main() {
	if [[ $CHECK_ONLY -eq 1 ]]; then
		run_check
		exit $?
	fi

	require_tools
	verify_prerequisites
	install_cert_sync
	install_stunnel_conf
	install_units

	log "Syncing certificate..."
	sudo "$SYNC_SCRIPT" || die "certificate sync failed - has Caddy issued $DOMAIN yet?"

	sudo systemctl enable --now stunnel-dot.service
	sudo systemctl enable --now dot-cert-sync.timer
	open_firewall

	log "Done. Point the phone at:"
	log "  Private DNS hostname: $DOMAIN"
	log "And set in phone_focus_mode/config.sh:"
	log "  DNS_TRUSTED_DOT_HOST=\"$DOMAIN\""
	log "  DNS_TRUSTED_DOT_IPS=\"\$(getent hosts $DOMAIN | awk '{print \$1}')\""
	run_check || true
}

while [[ $# -gt 0 ]]; do
	case $1 in
	--domain)
		DOMAIN="$2"
		shift 2
		;;
	--bind)
		BIND_ADDR="$2"
		shift 2
		;;
	--check)
		CHECK_ONLY=1
		shift
		;;
	-h | --help) usage ;;
	*) die "Unknown option: $1" ;;
	esac
done

main "$@"