mirror of
https://github.com/kuhyx/testsAndMisc.git
synced 2026-11-10 20:27:02 +01:00
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.
Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.
The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:
- 52 relative `source` lines for lib/common.sh and lib/android.sh. The
correct prefix differs per file: 40 were ../../ and 12 were ../../../,
so a blanket replace would have fixed one set and broken the other.
- REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
each walking up four levels from a directory now two levels shallower.
This caused a real regression -- the fixes suite went red with
"log_warn: command not found" -- caught by running it and comparing
against the pre-move baseline worktree.
- conftest.py's sys.path entries, which took the pytest gate down with
14 collection errors, and the `# shellcheck source=` directives, which
took shellcheck down with SC1091.
16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.
Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
198 lines
7.2 KiB
Bash
Executable File
198 lines
7.2 KiB
Bash
Executable File
#!/bin/bash
|
|
# SSL setup, local and remote.
|
|
#
|
|
# Sourced by raspberry_pi_nextcloud.sh; split out to keep it under the 250-line
|
|
# cap. Sourced rather than run, so it inherits the caller's strict mode
|
|
# and the variables defined above the source line.
|
|
|
|
# =============================================================================
|
|
# Setup Let's Encrypt SSL with DuckDNS
|
|
# =============================================================================
|
|
|
|
phase_setup_ssl() {
|
|
check_root
|
|
|
|
log_info "=== Setting up Let's Encrypt SSL with DuckDNS ==="
|
|
|
|
# Check if DuckDNS is configured
|
|
if [[ -z $DUCKDNS_DOMAIN ]] || [[ -z $DUCKDNS_TOKEN ]]; then
|
|
echo
|
|
log_info "To get auto-trusted HTTPS, you need a free DuckDNS domain."
|
|
log_info "1. Go to https://www.duckdns.org/ and sign in with Google/GitHub/etc."
|
|
log_info "2. Create a subdomain (e.g., 'myhomecloud' for myhomecloud.duckdns.org)"
|
|
log_info "3. Copy your token from the DuckDNS page"
|
|
echo
|
|
|
|
read -r -p "Enter your DuckDNS subdomain (without .duckdns.org): " DUCKDNS_DOMAIN
|
|
read -r -p "Enter your DuckDNS token: " DUCKDNS_TOKEN
|
|
read -r -p "Enter your email (for Let's Encrypt notifications): " LETSENCRYPT_EMAIL
|
|
|
|
if [[ -z $DUCKDNS_DOMAIN ]] || [[ -z $DUCKDNS_TOKEN ]] || [[ -z $LETSENCRYPT_EMAIL ]]; then
|
|
die "All fields are required"
|
|
fi
|
|
fi
|
|
|
|
local full_domain="${DUCKDNS_DOMAIN}.duckdns.org"
|
|
local pi_local_ip
|
|
pi_local_ip=$(hostname -I | awk '{print $1}')
|
|
|
|
# Get public IP for DuckDNS (Let's Encrypt needs external access)
|
|
local public_ip
|
|
public_ip=$(curl -s https://api.ipify.org) || public_ip=$(curl -s https://ifconfig.me) || true
|
|
|
|
log_info "Domain: $full_domain"
|
|
log_info "Pi local IP: $pi_local_ip"
|
|
log_info "Public IP: $public_ip"
|
|
|
|
echo
|
|
log_warning "=== IMPORTANT: Port Forwarding Required ==="
|
|
log_warning "For Let's Encrypt to work, you MUST forward ports on your router:"
|
|
log_warning " - Forward port 80 (HTTP) to $pi_local_ip"
|
|
log_warning " - Forward port 443 (HTTPS) to $pi_local_ip"
|
|
log_warning ""
|
|
log_warning "Go to your router admin page (usually http://192.168.1.1)"
|
|
log_warning "and set up port forwarding before continuing."
|
|
echo
|
|
read -r -p "Have you set up port forwarding? (yes/no): " port_forward_done
|
|
|
|
if [[ $port_forward_done != "yes" ]]; then
|
|
log_info "Please set up port forwarding and run this command again."
|
|
log_info "Without port forwarding, Let's Encrypt cannot verify your domain."
|
|
exit 0
|
|
fi
|
|
|
|
# Update DuckDNS to point to PUBLIC IP (not local IP)
|
|
log_info "Updating DuckDNS to point to public IP $public_ip..."
|
|
local duckdns_response
|
|
# When ip= is empty, DuckDNS auto-detects the public IP
|
|
duckdns_response=$(curl -s "https://www.duckdns.org/update?domains=${DUCKDNS_DOMAIN}&token=${DUCKDNS_TOKEN}&ip=")
|
|
|
|
if [[ $duckdns_response != "OK" ]]; then
|
|
die "Failed to update DuckDNS: $duckdns_response"
|
|
fi
|
|
log_success "DuckDNS updated to public IP"
|
|
|
|
# Set up automatic DuckDNS updates (cron) - auto-detect public IP
|
|
log_info "Setting up automatic DuckDNS IP updates..."
|
|
mkdir -p /opt/duckdns
|
|
cat >/opt/duckdns/duck.sh <<DUCKEOF
|
|
#!/bin/bash
|
|
echo url="https://www.duckdns.org/update?domains=${DUCKDNS_DOMAIN}&token=${DUCKDNS_TOKEN}&ip=" | curl -k -o /opt/duckdns/duck.log -K -
|
|
DUCKEOF
|
|
chmod 700 /opt/duckdns/duck.sh
|
|
|
|
# Add cron job for DuckDNS update every 5 minutes
|
|
(crontab -l 2>/dev/null || true) | grep -v "duckdns" | {
|
|
cat
|
|
echo "*/5 * * * * /opt/duckdns/duck.sh >/dev/null 2>&1"
|
|
} | crontab -
|
|
|
|
log_success "DuckDNS auto-update configured"
|
|
|
|
# Wait for DNS propagation
|
|
log_info "Waiting for DNS propagation (this may take a minute)..."
|
|
local dns_ip=""
|
|
local attempts=0
|
|
while [[ $dns_ip != "$public_ip" ]] && [[ $attempts -lt 12 ]]; do
|
|
sleep 5
|
|
dns_ip=$(dig +short "$full_domain" 2>/dev/null | tail -1) || true
|
|
attempts=$((attempts + 1))
|
|
log_info " DNS lookup: $dns_ip (expecting $public_ip, attempt $attempts/12)"
|
|
done
|
|
|
|
if [[ $dns_ip != "$public_ip" ]]; then
|
|
log_warning "DNS may not have propagated yet. Continuing anyway..."
|
|
else
|
|
log_success "DNS verified: $full_domain -> $public_ip"
|
|
fi
|
|
|
|
# Install certbot if not present
|
|
if ! command -v certbot &>/dev/null; then
|
|
log_info "Installing certbot..."
|
|
DEBIAN_FRONTEND=noninteractive apt-get install -y certbot python3-certbot-apache
|
|
fi
|
|
|
|
# Get Let's Encrypt certificate
|
|
log_info "Obtaining Let's Encrypt certificate..."
|
|
|
|
# First update Apache config with the new domain
|
|
cat >/etc/apache2/sites-available/nextcloud-ssl.conf <<EOF
|
|
<VirtualHost *:443>
|
|
ServerAdmin ${LETSENCRYPT_EMAIL}
|
|
DocumentRoot /var/www/nextcloud
|
|
ServerName ${full_domain}
|
|
|
|
SSLEngine on
|
|
# Certbot will update these paths
|
|
SSLCertificateFile /etc/ssl/nextcloud/server.crt
|
|
SSLCertificateKeyFile /etc/ssl/nextcloud/server.key
|
|
|
|
<Directory /var/www/nextcloud/>
|
|
Require all granted
|
|
AllowOverride All
|
|
Options FollowSymLinks MultiViews
|
|
|
|
<IfModule mod_dav.c>
|
|
Dav off
|
|
</IfModule>
|
|
</Directory>
|
|
|
|
# Security headers
|
|
Header always set Strict-Transport-Security "max-age=15552000; includeSubDomains"
|
|
Header always set X-Content-Type-Options "nosniff"
|
|
Header always set X-Frame-Options "SAMEORIGIN"
|
|
Header always set X-XSS-Protection "1; mode=block"
|
|
Header always set Referrer-Policy "no-referrer"
|
|
|
|
ErrorLog \${APACHE_LOG_DIR}/nextcloud_ssl_error.log
|
|
CustomLog \${APACHE_LOG_DIR}/nextcloud_ssl_access.log combined
|
|
</VirtualHost>
|
|
|
|
<VirtualHost *:80>
|
|
ServerName ${full_domain}
|
|
Redirect permanent / https://${full_domain}/
|
|
</VirtualHost>
|
|
EOF
|
|
|
|
systemctl reload apache2
|
|
|
|
# Run certbot
|
|
certbot --apache -d "$full_domain" --non-interactive --agree-tos --email "$LETSENCRYPT_EMAIL" --redirect
|
|
|
|
log_success "Let's Encrypt certificate obtained!"
|
|
|
|
# Update Nextcloud trusted domains
|
|
log_info "Updating Nextcloud configuration..."
|
|
cd /var/www/nextcloud || { log_error "Nextcloud is not installed at /var/www/nextcloud"; return 1; }
|
|
sudo -u www-data php occ config:system:set trusted_domains 0 --value="$full_domain"
|
|
sudo -u www-data php occ config:system:set overwrite.cli.url --value="https://$full_domain"
|
|
sudo -u www-data php occ config:system:set overwriteprotocol --value="https"
|
|
sudo -u www-data php occ config:system:set overwritehost --value="$full_domain"
|
|
|
|
# Keep local access working
|
|
sudo -u www-data php occ config:system:set trusted_domains 1 --value="$pi_local_ip"
|
|
sudo -u www-data php occ config:system:set trusted_domains 2 --value="$PI_HOSTNAME"
|
|
sudo -u www-data php occ config:system:set trusted_domains 3 --value="${PI_HOSTNAME}.local"
|
|
|
|
log_success "Nextcloud configured for $full_domain"
|
|
|
|
# Set up auto-renewal
|
|
log_info "Setting up automatic certificate renewal..."
|
|
systemctl enable certbot.timer
|
|
systemctl start certbot.timer
|
|
|
|
log_success "========================================"
|
|
log_success "Let's Encrypt SSL configured!"
|
|
log_success "========================================"
|
|
echo
|
|
log_info "Your Nextcloud is now accessible at:"
|
|
log_info " https://$full_domain (from anywhere on the internet)"
|
|
log_info " https://$pi_local_ip (from your local network)"
|
|
echo
|
|
log_info "This certificate is trusted by ALL browsers and devices automatically!"
|
|
log_info "No manual certificate installation required."
|
|
echo
|
|
log_info "Certificate auto-renewal is enabled."
|
|
log_info "DuckDNS IP auto-update is enabled."
|
|
}
|