mirror of
https://github.com/kuhyx/testsAndMisc.git
synced 2026-11-10 20:07:04 +01:00
Krzysztof kuhy Rudnicki
4f2b0ccdf7
Two levels of pure taxonomy carrying no information, and a 2-directory
cap leaves no room for them. Categories now sit directly under
linux_configuration/: features, fixes, utils, misc, fresh-install,
installers, diagnostics, gaming, boot_recovery, periodic_background, lib,
meta, tests. A script's own lib/ and tests/ are exempt from the cap, so
those stay put.
Depth violations 248 -> 139; roughly 40 of the remainder are inside
digital_wellbeing and hosts, deferred until the guard-lib repoint.
The moves are the easy half. What breaks is every path that counted
levels, and three classes of it had to be found by resolving paths rather
than reading diffs:
- 52 relative `source` lines for lib/common.sh and lib/android.sh. The
correct prefix differs per file: 40 were ../../ and 12 were ../../../,
so a blanket replace would have fixed one set and broken the other.
- REPO_ROOT in 7 fixes/lib/tests harnesses and setup_syncyomi_guard.sh,
each walking up four levels from a directory now two levels shallower.
This caused a real regression -- the fixes suite went red with
"log_warn: command not found" -- caught by running it and comparing
against the pre-move baseline worktree.
- conftest.py's sys.path entries, which took the pytest gate down with
14 collection errors, and the `# shellcheck source=` directives, which
took shellcheck down with SC1091.
16 symlinks in $HOME broke, including the entire i3blocks bar. All
repointed, and cpu_monitor/memory/disk/time/volume were run to confirm
they emit real output rather than merely resolving.
Verified: 1798 tests pass at 100% coverage, 8 of 9 lib/tests suites pass
(the ninth needs the coverage jail, identically at baseline), pre-commit
is clean, and the two untracked secret configs are still ignored after
their gitignore paths changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PJrqKERAo5QUeEHWS5Asgp
58 lines
1.5 KiB
Bash
Executable File
58 lines
1.5 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
# Replace these with your device's vendor and product IDs
|
|
# Note: lsusb prints as VENDOR:PRODUCT (e.g., 046d:c24f for Logitech G29)
|
|
# sysfs expects idVendor=046d and idProduct=c24f
|
|
VENDOR_ID="046d"
|
|
PRODUCT_ID="c24f"
|
|
|
|
ACTION=$1
|
|
|
|
# Check if script is run as root
|
|
if [[ $EUID -ne 0 ]]; then
|
|
echo "This script must be run as root. Please run with sudo."
|
|
exit 1
|
|
fi
|
|
|
|
# Check if action parameter is provided
|
|
if [[ $ACTION != "on" && $ACTION != "off" ]]; then
|
|
echo "Usage: $0 [on|off]"
|
|
exit 1
|
|
fi
|
|
|
|
DEVICE_PATH=""
|
|
|
|
# Find the device path in sysfs (robust scan)
|
|
for d in /sys/bus/usb/devices/*; do
|
|
if [[ -f "$d/idVendor" && -f "$d/idProduct" ]]; then
|
|
v=$(cat "$d/idVendor")
|
|
p=$(cat "$d/idProduct")
|
|
if [[ $v == "$VENDOR_ID" && $p == "$PRODUCT_ID" ]]; then
|
|
DEVICE_PATH="$d"
|
|
break
|
|
fi
|
|
fi
|
|
done
|
|
|
|
# Check if device was found
|
|
if [ -z "$DEVICE_PATH" ]; then
|
|
echo "Device with Vendor ID $VENDOR_ID and Product ID $PRODUCT_ID not found in /sys/bus/usb/devices."
|
|
echo "Tip: Run 'lsusb | grep ${VENDOR_ID}:${PRODUCT_ID}' to verify it's connected."
|
|
exit 1
|
|
fi
|
|
|
|
# Enable or disable the device
|
|
if [ ! -e "$DEVICE_PATH/authorized" ]; then
|
|
echo "The 'authorized' attribute is not present at $DEVICE_PATH."
|
|
echo "This device may not support toggling via 'authorized'."
|
|
exit 1
|
|
fi
|
|
|
|
if [ "$ACTION" == "off" ]; then
|
|
echo '0' > "$DEVICE_PATH/authorized"
|
|
echo "Device at $(basename "$DEVICE_PATH") turned off."
|
|
elif [ "$ACTION" == "on" ]; then
|
|
echo '1' > "$DEVICE_PATH/authorized"
|
|
echo "Device at $(basename "$DEVICE_PATH") turned on."
|
|
fi
|