mirror of
https://github.com/kuhyx/testsAndMisc.git
synced 2026-11-21 04:22:17 +01:00
phone_focus_mode is built for a rooted phone: the hosts layer is a read-only
bind mount over /system/etc/hosts, chosen so that even root-in-a-terminal
cannot overwrite it. None of that ports to a stock locked device. This splits
out the parts that are device-independent so one policy can drive both.
python_pkg/focus_policy parses config.sh rather than copying it, so the shell
config stays the source of truth and the two cannot drift. It rejects the
shipped REDACTED_* coordinate placeholder instead of defaulting to (0,0),
which would move "home" to the Atlantic and quietly disable the location gate.
blocklist.py converts the hosts file to domains for a DoT resolver or a local
VpnService. Three properties of the real 194k-line file make the obvious parser
wrong, and all three are handled: generate_hosts_file.sh *comments out*
deliberate unblocks rather than deleting them, so stripping '#' re-blocks
facebook/messenger/linkedin/4chan; the StevenBlack header carries loopback and
IPv6 housekeeping that would blackhole localhost; and ~1060 upstream annotation
tokens ('#[adware.zeno]', '"spam') render as address=/"spam/, which makes
dnsmasq refuse to start -- taking DNS down rather than blocking anything.
Verified with dnsmasq --test over all 185681 generated domains.
strip_workout_hosts.py had the same class of bug on the live rooted phone:
exact set membership meant the allowlisted googlevideo.com never matched the
dynamic r*---sn-*.googlevideo.com hosts YouTube actually streams from, so the
workout unblock was only partly working. Now suffix-matched (17 lines stripped,
was 14). The three new tests were checked against the original code in a
throwaway worktree; two of them fail there, so they pin the fix rather than
passing vacuously.
focus_owner is a device-owner app that deliberately does nothing yet. It ships
clearDeviceOwnerApp() implemented and tested first, because dpm
remove-active-admin does not work on a device owner: an app that locks the
device down before proving it can let go leaves a soft-brick recoverable only
through fastboot on a locked bootloader. Built, installed and launched on the
Pixel 6a; dumpsys afterwards confirms Device Owner Type -1 and no user
restrictions, i.e. the phone is unchanged.
Measured while scoping this, and not yet reflected in any enforcement code:
on Android 16 both pm suspend and pm disable-user are cleared by a reboot, so
shell-level app blocking is per-session only. setApplicationHidden is assumed
to persist under Device Owner but is untested.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AwepyL5Lxs5QKbKkMpxxxL
90 lines
3.7 KiB
YAML
90 lines
3.7 KiB
YAML
name: focus_owner
|
|
description: "A new Flutter project."
|
|
# The following line prevents the package from being accidentally published to
|
|
# pub.dev using `flutter pub publish`. This is preferred for private packages.
|
|
publish_to: 'none' # Remove this line if you wish to publish to pub.dev
|
|
|
|
# The following defines the version and build number for your application.
|
|
# A version number is three numbers separated by dots, like 1.2.43
|
|
# followed by an optional build number separated by a +.
|
|
# Both the version and the builder number may be overridden in flutter
|
|
# build by specifying --build-name and --build-number, respectively.
|
|
# In Android, build-name is used as versionName while build-number used as versionCode.
|
|
# Read more about Android versioning at https://developer.android.com/studio/publish/versioning
|
|
# In iOS, build-name is used as CFBundleShortVersionString while build-number is used as CFBundleVersion.
|
|
# Read more about iOS versioning at
|
|
# https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html
|
|
# In Windows, build-name is used as the major, minor, and patch parts
|
|
# of the product and file versions while build-number is used as the build suffix.
|
|
version: 1.0.0+1
|
|
|
|
environment:
|
|
sdk: ^3.12.2
|
|
|
|
# Dependencies specify other packages that your package needs in order to work.
|
|
# To automatically upgrade your package dependencies to the latest versions
|
|
# consider running `flutter pub upgrade --major-versions`. Alternatively,
|
|
# dependencies can be manually updated by changing the version numbers below to
|
|
# the latest version available on pub.dev. To see which dependencies have newer
|
|
# versions available, run `flutter pub outdated`.
|
|
dependencies:
|
|
flutter:
|
|
sdk: flutter
|
|
|
|
# The following adds the Cupertino Icons font to your application.
|
|
# Use with the CupertinoIcons class for iOS style icons.
|
|
cupertino_icons: ^1.0.8
|
|
|
|
dev_dependencies:
|
|
flutter_test:
|
|
sdk: flutter
|
|
|
|
# The "flutter_lints" package below contains a set of recommended lints to
|
|
# encourage good coding practices. The lint set provided by the package is
|
|
# activated in the `analysis_options.yaml` file located at the root of your
|
|
# package. See that file for information about deactivating specific lint
|
|
# rules and activating additional ones.
|
|
flutter_lints: ^6.0.0
|
|
|
|
# For information on the generic Dart part of this file, see the
|
|
# following page: https://dart.dev/tools/pub/pubspec
|
|
|
|
# The following section is specific to Flutter packages.
|
|
flutter:
|
|
|
|
# The following line ensures that the Material Icons font is
|
|
# included with your application, so that you can use the icons in
|
|
# the material Icons class.
|
|
uses-material-design: true
|
|
|
|
# To add assets to your application, add an assets section, like this:
|
|
# assets:
|
|
# - images/a_dot_burr.jpeg
|
|
# - images/a_dot_ham.jpeg
|
|
|
|
# An image asset can refer to one or more resolution-specific "variants", see
|
|
# https://flutter.dev/to/resolution-aware-images
|
|
|
|
# For details regarding adding assets from package dependencies, see
|
|
# https://flutter.dev/to/asset-from-package
|
|
|
|
# To add custom fonts to your application, add a fonts section here,
|
|
# in this "flutter" section. Each entry in this list should have a
|
|
# "family" key with the font family name, and a "fonts" key with a
|
|
# list giving the asset and other descriptors for the font. For
|
|
# example:
|
|
# fonts:
|
|
# - family: Schyler
|
|
# fonts:
|
|
# - asset: fonts/Schyler-Regular.ttf
|
|
# - asset: fonts/Schyler-Italic.ttf
|
|
# style: italic
|
|
# - family: Trajan Pro
|
|
# fonts:
|
|
# - asset: fonts/TrajanPro.ttf
|
|
# - asset: fonts/TrajanPro_Bold.ttf
|
|
# weight: 700
|
|
#
|
|
# For details regarding fonts from package dependencies,
|
|
# see https://flutter.dev/to/font-from-package
|