mirror of
https://github.com/kuhyx/wake-alarm.git
synced 2026-11-21 19:02:20 +01:00
Qualify the DND claim: priority DND yes, total silence no
Measured on the Pixel via the muted-stream mask in `dumpsys audio`: STREAM_ALARM is unmuted under priority DND (zen_mode=1, mask 0x1a6) and MUTED under total silence (zen_mode=2, mask 0x9be). The verified ring was priority DND, so "STREAM_ALARM ignores DND" was true but overstated — no audio flag escapes total silence, and the fix if that gap ever matters is a zen-policy check at arm time, not an audio change. Also records that raiseAlarmVolume() genuinely runs on this hardware (observed raising oldIndex:0 -> 7, no SecurityException), so it recovers a stream turned down to zero but not one muted by total silence. Two probe-harness traps kept: --build-number produces a non-running APK, and the arm probe can register for TOMORROW because main.dart's rearm() recomputes nextOccurrence after the armed minute has passed. Folded in from scratch notes left mid-session (.dnd-findings/, TODO-verify-dnd-ring.md), both now deleted — the verification they asked for has since been done. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
This commit is contained in:
parent
91e3f30653
commit
867ff8da22
@ -23,10 +23,25 @@ scanning) — never for the ring path.
|
||||
|
||||
Things that are a hard crash or a silent no-ring, not a warning:
|
||||
|
||||
- **`STREAM_ALARM` is load-bearing.** `AlarmService` sets
|
||||
`AudioAttributes.USAGE_ALARM`, which is what ignores DND and silent mode.
|
||||
Never `USAGE_MEDIA`/`STREAM_MUSIC` — it would be muted exactly when the
|
||||
alarm matters most.
|
||||
- **`STREAM_ALARM` is load-bearing — but it does not beat *every* DND mode.**
|
||||
`AlarmService` sets `AudioAttributes.USAGE_ALARM`; never
|
||||
`USAGE_MEDIA`/`STREAM_MUSIC`, which would be muted exactly when the alarm
|
||||
matters most. Measured on the Pixel 6a (2026-08-27), the muted-stream mask
|
||||
from `dumpsys audio` differs by zen mode:
|
||||
|
||||
| DND mode | `zen_mode` | `STREAM_ALARM` |
|
||||
|---|---|---|
|
||||
| priority (`ZEN_MODE_IMPORTANT_INTERRUPTIONS`) | 1 | **not muted** (mask `0x1a6`) |
|
||||
| total silence (`ZEN_MODE_NO_INTERRUPTIONS`) | 2 | **MUTED** (mask `0x9be`) |
|
||||
|
||||
The confirmed ring was under **priority DND** (`zen_mode=1`): player
|
||||
`state:started`, `usage=USAGE_ALARM` → `STREAM_ALARM(4)`, `mutedState:none`.
|
||||
**Total silence mutes the alarm stream system-wide**, and no audio flag
|
||||
escapes it — so "ignores DND" means priority DND, not total silence. If that
|
||||
gap ever matters, the fix is a zen-policy check at arm time, not an audio
|
||||
change. `raiseAlarmVolume()` does run on this hardware (observed raising
|
||||
`oldIndex:0` → 7, no `SecurityException`), which recovers a stream turned
|
||||
down to zero but not one muted by total silence.
|
||||
- **`android:foregroundServiceType="mediaPlayback"` must be on the `<service>`
|
||||
in the manifest AND passed to `startForeground()`.** Omitting either is a
|
||||
hard crash the moment the alarm fires on API 34+ — and it is invisible on an
|
||||
@ -89,4 +104,3 @@ cannot finish an activity). Without it the dismiss screen stays up over the
|
||||
lockscreen forever — back is disabled by design in both halves — and the live
|
||||
instance would carry a satisfied room proof and the solved answer into the
|
||||
next ring.
|
||||
|
||||
|
||||
@ -99,6 +99,23 @@ The alarm is no longer opt-in and can no longer be weakened:
|
||||
later than 08:00 whatever its source, so a stale or tampered remote value
|
||||
cannot move the alarm later through sync.
|
||||
|
||||
### DND: verified for priority mode, NOT for total silence
|
||||
|
||||
Measured on the Pixel: `STREAM_ALARM` is unmuted under **priority** DND
|
||||
(`zen_mode=1`, mask `0x1a6`) and **muted** under **total silence**
|
||||
(`zen_mode=2`, mask `0x9be`). The confirmed ring was priority DND. No audio
|
||||
flag escapes total silence, so if that gap matters the fix is a zen-policy
|
||||
check at arm time, not an audio change. Detail in `DOCS-phone-alarm.md`.
|
||||
|
||||
Two harness traps found while testing this, worth keeping:
|
||||
|
||||
- **Do not pass `--build-number` to a probe build** — it produced a
|
||||
non-running APK.
|
||||
- **The arm probe can register for TOMORROW.** It calls `schedule()`, then
|
||||
`main.dart`'s `rearm()` recomputes `nextOccurrence`; if the armed minute has
|
||||
passed by then the alarm lands on the next day. Always re-check the
|
||||
registered `triggerTime` is today before waiting for a ring.
|
||||
|
||||
### Still unverified
|
||||
|
||||
- The **QR** proof has no scanner UI (`mobile_scanner`); `checkQr` and its
|
||||
|
||||
Loading…
Reference in New Issue
Block a user