Commit Graph

8 Commits

Author SHA1 Message Date
dc2d54668b Phase 4/3: close the ring screen on dismiss, and make NFC registerable
Two defects that each defeated the alarm in a different way:

1. Nothing finished AlarmActivity after a correct answer. Sound stopped and
   the alarm re-armed, but the dismiss screen stayed up over the lockscreen
   forever — back is disabled in both halves by design — and the live instance
   kept _inRoom=true with the solved answer still typed, so the next ring
   could reuse an already-passed gate. AlarmActivity now handles
   closeRingScreen; the shared AlarmChannel deliberately holds
   applicationContext and cannot finish an activity, hence the split handler.

2. Nothing could write roomProof.nfcTagId — there was no registration UI — so
   checkNfc always answered "no tag registered" and checkQr was never called.
   Functionally that left steps as the only satisfiable proof, which is
   exactly the state the decision rules out ("NFC or QR qualifies; steps alone
   does NOT") and removes the redundancy whose purpose is that one failing
   mechanism at 06:00 must never block dismissal. Added RoomProofScreen
   (reader mode from MainActivity, since registration needs an Activity) and
   linked it from Settings.

Also: StepCounter kept one listener instead of registering a fresh one per
ring and never unregistering, and the ring screen drops its NFC handler on
dispose.

New tests cover what had been dead code: a registered tag satisfies the proof
and reveals the challenge, a foreign tag does not, and a correct answer
invokes BOTH dismiss and closeRingScreen. The emulator cannot reach the
dismiss path at all (no step sensor, no NFC), which is why it is covered by
widget tests rather than claimed from the AVD run.

Documented ringNow/main_ring_probe.dart in AGENTS.md as a deliberate manual
test handle, the phone-side equivalent of wake-alarm.service.

flutter test: 69 pass. dart analyze lib/ test/: clean. pre-commit: passed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
2026-08-27 21:39:01 +02:00
cb50e58a56 Phase 4/3: NFC room proof, runtime permissions, non-blocking step reads
Three defects found by reviewing the emulator run, all on the dismiss path:

1. ACTIVITY_RECOGNITION was declared but never requested at runtime (API 29+).
   Denied, TYPE_STEP_COUNTER delivers nothing, so checkSteps() reports "sensor
   unavailable" forever. With steps the only wired proof, that made the alarm
   *undismissable*, not merely degraded. MainActivity now requests it
   alongside POST_NOTIFICATIONS.

2. checkNfc/checkQr were dead code — no reader, no channel method, no
   registration — so steps was the only reachable proof. That inverts the
   decision ("NFC or QR qualifies; steps alone does NOT") and removes exactly
   the redundancy whose purpose is that one failing mechanism at 06:00 must
   never block dismissal. Added NfcReader (hand-written on the existing
   channel, NfcAdapter.enableReaderMode so the tap does not restart the
   activity and reset the challenge) plus RoomProofSettings for the registered
   tag/QR. mobile_scanner stays the droppable extra.

3. StepCounter blocked the platform main thread up to 3s per read, called from
   the MethodChannel handler — jank-to-ANR on the ring screen. Now registers a
   listener and serves the last sample; reads never block.

Also: raiseAlarmVolume() is guarded. setStreamVolume can throw under a zen
rule, and by then startForeground() has already posted — a failed volume bump
must not take the ring down with it.

Verified on the API 36 AVD with the real app widget and route (the earlier
probe rendered its own UI, so it proved the Kotlin path but nothing about
/ring): screen Asleep -> Awake, AlarmActivity top resumed over the lockscreen,
RingScreen showing the room-proof gate. New widget tests cover the /ring route
resolving and the challenge staying gated behind the room proof.

flutter test: 57 pass. dart analyze: clean. Zero Python files touched.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
2026-08-27 21:28:24 +02:00
af2a9b416b Phase 4/3: the phone's Dart half — ring screen, challenges, room proofs
Dart side of the alarm (items 1, 4, 3). main.dart had no init seam at all;
it now has ensureInitialized(), a navigatorKey and a /ring route.

- challenge.dart: all five kinds ported from _challenges.py so both halves
  behave identically. kDismissCodeLength/kDismissFlashSeconds are duplicated
  from _constants.py, not synced — noted in the file, since Dart cannot read
  Python.
- alarm_scheduler.dart: the Dart side of the single MethodChannel.
- ring_screen.dart: room proof first, then a challenge, then dismiss. Back is
  a no-op (PopScope) so the alarm cannot be escaped.
- room_proof.dart: NFC or QR satisfies on its own; steps NEVER do alone —
  the phone is stationary while you walk to it, so steps only accrue after
  pickup and can be faked by shaking it in bed. Steps count only together
  with elapsed time, as the fallback when both others fail.
- home_screen: arms the app's own alarm instead of asking the user to confirm
  in the Clock app (item 1's "no user interaction"). SET_ALARM stays as
  redundancy with SKIP_UI=true.

Re-arm has three hooks and needs all three: startup, BOOT_COMPLETED, and
dismiss. The plan assumed LogStore.changes would cover this; that stream does
not exist in crdt_sync_dart (verified — the library has no Stream at all), so
the picker's save is only one hook and a restart would otherwise arm nothing.

Fixed a real gap the API 36 AVD exposed: POST_NOTIFICATIONS was never
requested at runtime, so a fresh install sat at importance=NONE and the
full-screen intent was rejected outright — the alarm would ring with no
dismiss screen. MainActivity now requests it, and canUseFullScreenIntent()
also checks areNotificationsEnabled() so the check gates rather than warns.

Verified on the API 36 AVD: screen Asleep -> Awake, AlarmActivity became the
top resumed activity over the lockscreen, service isForeground=true
types=0x2 (mediaPlayback) category=alarm, no crash. flutter test: 54 pass.
dart analyze: clean.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
2026-08-27 21:22:07 +02:00
e0cc20664c Phase 4: the phone's Kotlin ring path (item 4)
Hand-written Kotlin behind ONE MethodChannel, never a plugin: AGP 9.0.1 /
Gradle 9.1 / Kotlin 2.3.20 is bleeding edge and a plugin that will not compile
breaks the build outright rather than degrading.

- AlarmScheduler: setAlarmClock() (Doze-exempt, no SCHEDULE_EXACT_ALARM
  prompt), persists the time so boot and dismiss can re-arm.
- AlarmReceiver: hands straight to the service — a receiver gets ~10s and no
  wakelock, so nothing that must outlive it belongs there.
- AlarmService: foreground service, PARTIAL_WAKE_LOCK, USAGE_ALARM
  (= STREAM_ALARM, which is what ignores DND and silent mode), looping
  ringtone, vibration, full-screen intent over the lockscreen.
- AlarmActivity: showWhenLocked + turnScreenOn, routes to the Dart ring
  screen, back is a no-op so the alarm cannot be escaped.
- BootReceiver: re-arms on BOOT_COMPLETED; AlarmManager drops alarms across a
  reboot.
- StepCounter: TYPE_STEP_COUNTER baseline for item 3's fallback proof, also
  hand-written to keep plugin risk off this path.

Details that are a hard crash or a silent no-ring rather than a warning:
FLAG_IMMUTABLE on every PendingIntent (mandatory since API 31);
foregroundServiceType declared on the <service> AND passed to
startForeground(); explicit android:exported on every component;
USE_FULL_SCREEN_INTENT declared (missing from the plan's list) and
canUseFullScreenIntent() exposed so the Dart side can gate rather than warn.

Every permission verified present in android-36's api-versions.xml rather
than from recall. Compiles green with `flutter build apk --debug`.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
2026-08-27 21:12:51 +02:00
2c10788d44 Fix stale adaptive_icon_background left over from the warm-palette icon regen
Some checks are pending
pre-commit / pre-commit (push) Waiting to run
Tests / test (3.10) (push) Waiting to run
Tests / test (3.11) (push) Waiting to run
Tests / test (3.12) (push) Waiting to run
pubspec.yaml's adaptive_icon_background is a separate literal from
python_pkg/app_icons' own style.BACKGROUND -- the icon regen updated
every generated PNG but missed this one, so the actual on-device home
screen icon (Android's adaptive icon, not the legacy mipmap) stayed on
the old cool charcoal. Caught on the physical device, not by file checks.

testsAndMisc's generator now syncs this automatically going forward.
2026-07-21 21:42:48 +02:00
71175690a7 Bump gatelock pin to released v0.1.1, regenerate launcher icon
Picks up gatelock's warm-tinted unified-design-system palette + the new
on_fill token. wake_alarm's own UI wasn't audited for the on-fill
contrast bug this session (out of the 3-pilot scope that found it in
diet-guard/screen-locker/dufs-cloud) -- worth a follow-up pass.

Verified: wake_alarm pytest 300/300 @ 100% coverage against the new pin.
2026-07-21 21:18:02 +02:00
64c25e67e9 phone_app: replace the stock Flutter launcher icon
Some checks are pending
pre-commit / pre-commit (push) Waiting to run
Tests / test (3.10) (push) Waiting to run
Tests / test (3.11) (push) Waiting to run
Tests / test (3.12) (push) Waiting to run
Adopt the shared icon family (python_pkg/app_icons in testsAndMisc): a
charcoal #1B1D21 field carrying an orange clock glyph, orange being this
app's own theme seedColor.

The clock is deliberately drawn without bell "ears" - at launcher size they
read as noise rather than as an alarm clock.

Adds the adaptive-icon layers the project never had, including an Android 13
monochrome layer.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-19 16:59:38 +02:00
0704e44912 Add wake_alarm_sync phone-side Flutter companion app
Some checks are pending
pre-commit / pre-commit (push) Waiting to run
Tests / test (3.10) (push) Waiting to run
Tests / test (3.11) (push) Waiting to run
Tests / test (3.12) (push) Waiting to run
New Flutter app (com.kuhy.wake_alarm_sync) that sets the phone alarm and
writes the wake time to a GitHub Gist for cross-device sync: Gist service,
GitHub device-flow auth, sync settings, home/settings screens. Source only;
build/.dart_tool/.idea artifacts excluded by the app's .gitignore.

Not yet gated by CI (wake-alarm CI is Python-only) and pending on-device
verification.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RRCdR4D8SaVrN2xraMQxM
2026-07-10 23:16:11 +02:00