The launcher "Wstrzymaj aplikację" paused WakeAlarm mid-ring on 11-20 and
11-22. WakeAlarm is now a device admin, and a pause, admin removal,
revoked notifications or full-screen intent, or a killed ring on a live
morning is a bypass: a miss on any weekday, the phone rings again, and
the PC rings at once until a newer dismiss or 30 min.
The PC rings also go to every connected monitor, since the speakers are
off at the knob overnight; a one-shot silent probe checks them at A-5.
DOCS-bypass.md has the layers, causes and measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since the material_ui bump the app supplied no framework
MaterialLocalizations, so crdt_sync_flutter's E2ePassphraseButton
showDialog crashed and the phone stayed locked. Nothing synced and the
PC fallback rang on 2026-11-16. The app now provides the localization
delegates. Publish failures now reach logcat in release builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WzxdWWfb63jncj9Lca2jeX
Flutter 3.50 deprecates package:flutter/material.dart, so the app
moves to material_ui 1.11.0 together with sync_settings_ui 0.8.0
and github_device_auth 0.5.0 (crdt_sync 0.13.1 rides along).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Sick days screen (own name, sick icon, cat-2 fill): tap today or a later
day to mark it sick, tap again to clear; past days inert. Writes the
sickdays wire format (state sick/cleared + actor, one HLC per write) to
sickdays-sync/devices via crdt_sync syncLog.
- Mutual exclusion in both pickers: each syncs the other pool on open and
refuses a date it holds, naming the pool; an unreadable pool refuses all.
- Native SickDays cache (fail closed via DayCache); AlarmReceiver skips the
ring with reason "sick_day" (no markFired, no ring_started); StickCheck
verdict sick_day, streak skips sick days; stakes card says so.
- Pre-alarm pool sync: allow-while-idle alarm at 21:00 and A-30 (request
code 1006) runs a headless engine (poolSyncMain) that pulls both pools
from RTDB and rewrites both native caches, so a PC mark arrives with the
app closed. The ring decision stays a cache read.
- JVM unit tests (JUnit 4.13.2) for DayCache, RingDecision,
PoolSyncSchedule, StickCheck; Dart tests; Dart->Python interop check.
pylint hook skipped: verify.py imports sickdays, not in the hook env until
the sickdays-v0.1.0 tag exists; run by hand in a sickdays venv (10.00/10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Xfj1sxKH9VBPqpcAni8Jry
The alarm was opt-in: it only armed when the user tapped "Set Alarm & Sync to
PC", so it could be defeated by simply not tapping it, or by cancelling it the
night before. It is now automatic and there is no lever a half-asleep user can
pull that buys them sleep.
- AlarmPolicy bakes the schedule in at 08:00 daily. The only edit the UI
offers is moving the NEXT alarm earlier; setEarlier() refuses anything at or
after the baseline, and refuses to relax an active override. Earlier-only is
the whole design: every available change costs the user sleep.
- The ratchet resets after each fire, so an early start is one-shot. A one-way
ratchet with no reset is a trap, not a defence — the first 05:00 would
otherwise be permanent with no way back short of reinstalling.
- load() re-validates the stored value and ignores anything at or after the
baseline. SharedPreferences is not a trust boundary.
- No cancel. The Kotlin handler is deleted, not just the Dart wrapper, so the
capability genuinely does not exist rather than being one invokeMethod away.
- Arming happens in main()'s init seam and via AlarmWatchdog, a daily
self-rescheduling check that re-arms if nothing is scheduled — closing the
gap where a force-stop or a failed re-arm goes unnoticed until the morning
it does not ring. BootReceiver re-establishes it, since setInexactRepeating
does not survive a reboot.
- Publishing to the PC is automatic too; it used to need the same tap.
PC half, so the two agree with the network down:
- FALLBACK_ALARM_HOUR 13 -> 8, matching the phone's baseline. At 13:00 a
Firebase outage silently moved the alarm five hours LATER — the one
direction the design refuses to allow.
- _trigger._clamp_to_baseline() refuses any resolved alarm later than the
baseline, whatever its source. Without it the PC would faithfully reproduce
a stale or tampered remote value and the forbidden direction stays reachable
through sync.
Tests: 465 Python at 100% branch coverage, 79 Dart. Both ratchet directions
are covered, per the standing rule about monotonic counters. test_sync.py and
test_trigger.py were split (payload, token, CLI, clamp) to stay under the
250-line gate; the split lost indirect coverage of extract_hlc/newest_alarm,
which now have direct tests instead.
`python -m wake_alarm._sync --show` and `_trigger --dry-run` both re-run and
still print real output.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
Dart side of the alarm (items 1, 4, 3). main.dart had no init seam at all;
it now has ensureInitialized(), a navigatorKey and a /ring route.
- challenge.dart: all five kinds ported from _challenges.py so both halves
behave identically. kDismissCodeLength/kDismissFlashSeconds are duplicated
from _constants.py, not synced — noted in the file, since Dart cannot read
Python.
- alarm_scheduler.dart: the Dart side of the single MethodChannel.
- ring_screen.dart: room proof first, then a challenge, then dismiss. Back is
a no-op (PopScope) so the alarm cannot be escaped.
- room_proof.dart: NFC or QR satisfies on its own; steps NEVER do alone —
the phone is stationary while you walk to it, so steps only accrue after
pickup and can be faked by shaking it in bed. Steps count only together
with elapsed time, as the fallback when both others fail.
- home_screen: arms the app's own alarm instead of asking the user to confirm
in the Clock app (item 1's "no user interaction"). SET_ALARM stays as
redundancy with SKIP_UI=true.
Re-arm has three hooks and needs all three: startup, BOOT_COMPLETED, and
dismiss. The plan assumed LogStore.changes would cover this; that stream does
not exist in crdt_sync_dart (verified — the library has no Stream at all), so
the picker's save is only one hook and a restart would otherwise arm nothing.
Fixed a real gap the API 36 AVD exposed: POST_NOTIFICATIONS was never
requested at runtime, so a fresh install sat at importance=NONE and the
full-screen intent was rejected outright — the alarm would ring with no
dismiss screen. MainActivity now requests it, and canUseFullScreenIntent()
also checks areNotificationsEnabled() so the check gates rather than warns.
Verified on the API 36 AVD: screen Asleep -> Awake, AlarmActivity became the
top resumed activity over the lockscreen, service isForeground=true
types=0x2 (mediaPlayback) category=alarm, no crash. flutter test: 54 pass.
dart analyze: clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
New Flutter app (com.kuhy.wake_alarm_sync) that sets the phone alarm and
writes the wake time to a GitHub Gist for cross-device sync: Gist service,
GitHub device-flow auth, sync settings, home/settings screens. Source only;
build/.dart_tool/.idea artifacts excluded by the app's .gitignore.
Not yet gated by CI (wake-alarm CI is Python-only) and pending on-device
verification.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017RRCdR4D8SaVrN2xraMQxM