Also freedays 0.4.4, kuhy-credit 0.3.2, data_transfer_flutter 0.2.4
and sync_settings_ui 0.8.5. The utils release moved freedays,
sickdays and gatelock onto kuhy-credit 0.3.2 together, which is what
let the freshness gate go green without an allowlist entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The launcher "Wstrzymaj aplikację" paused WakeAlarm mid-ring on 11-20 and
11-22. WakeAlarm is now a device admin, and a pause, admin removal,
revoked notifications or full-screen intent, or a killed ring on a live
morning is a bypass: a miss on any weekday, the phone rings again, and
the PC rings at once until a newer dismiss or 30 min.
The PC rings also go to every connected monitor, since the speakers are
off at the knob overnight; a one-shot silent probe checks them at A-5.
DOCS-bypass.md has the layers, causes and measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Upstream released after the last landing, so the freshness gate went
red: gatelock 0.16.0, crdt_sync_flutter 0.9.1, data_transfer_flutter
0.2.3, github_device_auth 0.5.1, material_ui 1.11.1, sync_settings_ui
0.8.4, gradle 9.9.1. All additive upstream.
Todo: 364208fc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
crdt_sync_flutter 0.8.2 imports material_ui, so the passphrase dialog
is material_ui's AlertDialog, not the framework one. The test still
asserted the framework type and failed on a clean checkout of
7a3b767. It now checks the type the dialog really is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WzxdWWfb63jncj9Lca2jeX
Since the material_ui bump the app supplied no framework
MaterialLocalizations, so crdt_sync_flutter's E2ePassphraseButton
showDialog crashed and the phone stayed locked. Nothing synced and the
PC fallback rang on 2026-11-16. The app now provides the localization
delegates. Publish failures now reach logcat in release builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WzxdWWfb63jncj9Lca2jeX
The home screen prefixed it to every publish() result, including the
full-screen-intent refusal and sync errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Motion tokens hand-copied from DOCS-motion.md into theme.dart; every
page route goes through appRoute() (slow, decelerate in, accelerate
out, instant under Remove animations). mediumImpact on the picker
confirm, heavyImpact on a refused time. The Clock app line shows only
when the SET_ALARM handoff finished before its 3 s timeout. Sound is
skipped on purpose.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On 2026-11-11 the ring stood down for a sick day, the mark was cleared
at 11:38, and the 19:31 stick check judged a miss and sent a lockdown
for a day whose alarm never rang. AlarmReceiver now latches the skip
and StickCheck honours it after a later clear.
Docs: the 11-01/10-26 PC no_session rings were correct (no session
started before A+15); the focus-owner on-device check is still open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The phone pushes alarm.json sealed under wake-alarm-sync/devices-e2e
(Argon2id key from the shared crdt-sync passphrase, keystore + lock
icon in Settings). The PC reads it through open_encrypted_client on
both Firebase and the GitHub mirror (now via GitHubSyncClient); no or
wrong passphrase reads as nothing published, never plaintext. The old
plaintext prefix is copied once per process, never deleted.
crdt-sync 0.11.0, crdt_sync_dart 0.14.1, crdt_sync_flutter 0.8.1,
sync_settings_ui 0.8.2, freedays 0.4.2, sickdays 0.5.3. install.sh
now fails if crdt_sync/pynacl/argon2 do not import.
Todo: fda71ed1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The free-day hook ran the system flutter (3.47.9). On a fresh
checkout its pub get rewrote pubspec.lock to its own test_api, so
pre-commit failed with "files were modified". Hooks and
test_changed.sh now put the pinned fvm SDK on PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Flutter 3.50 deprecates package:flutter/material.dart, so the app
moves to material_ui 1.11.0 together with sync_settings_ui 0.8.0
and github_device_auth 0.5.0 (crdt_sync 0.13.1 rides along).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stakes and history move behind two tiles that open bottom sheets;
the page no longer scrolls at Pixel 6a geometry (home_fit_test).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WzxdWWcbzoov1KFZJSFcSs
check.sh now runs Dart->Python (keep, unsorted/duplicate input, a cleared
keep day, a keep-only edit that must not re-stamp state) and
Python->Dart (0.2.0 keep sets plus a 0.1.0 record with no keep, a stale
keep and a malformed one), Python 0.2.0 as the oracle with explicit
paths and HOME pointed at a scratch dir. DOCS-sick-days.md and the
SickDays.kt contract describe the alarm-only native cache.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PAhbNszs5JKdtnD4uBi3xp
Tapping today or a later normal day opens a sheet with one switch per
locker (Workout lock, LeetCode, Book, Diet, Wake alarm), all off, and
"Mark sick"; a sick day reopens with its switches, "Save" (keep-only
edit, nothing written when unchanged) and "Clear sick day". Past days
stay inert. A sick day keeping any locker carries a dot in the calendar
and a "Kept: ..." line in the list. DayCell moves to day_cell.dart for
the 250-line cap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PAhbNszs5JKdtnD4uBi3xp
SickDayPool gains keep: mark/clear write state+actor+keep on one tick,
setKept re-stamps only keep+actor, read rules 1-5 in sick_day_keep.dart.
The native SickDays cache now holds only days on which the alarm stands
down, so a sick day that keeps the alarm rings like a normal day.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PAhbNszs5JKdtnD4uBi3xp
The test staged a 2026-10-01 event through stageLocalSettings, which called
stageEnforcementData on the real clock; on 2026-10-16 the event aged past
boundEvents' 14-day window and the test went red for everyone.
stageLocalSettings now forwards an optional `now` to stageEnforcementData
(callers unchanged), and the test passes its fixed clock. phone_app suite:
402 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Xfj1sxKH9VBPqpcAni8Jry
A release build gives no way to see the SharedPreferences cache that
AlarmReceiver reads at ring time (no run-as, no log of its contents), so
"the Dart UI shows it" could not prove "the alarm will stay silent".
- SickDays.store/dates log the sorted set under WakeAlarmSickDays.
- AlarmChannel getSickDays returns the cached set (null if unreadable).
- The Sick days screen reads it on open (before the sync rewrites it) and
after every sync: "Alarm cache: <dates>" / "none" / "unreadable".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Xfj1sxKH9VBPqpcAni8Jry
- Sick days screen (own name, sick icon, cat-2 fill): tap today or a later
day to mark it sick, tap again to clear; past days inert. Writes the
sickdays wire format (state sick/cleared + actor, one HLC per write) to
sickdays-sync/devices via crdt_sync syncLog.
- Mutual exclusion in both pickers: each syncs the other pool on open and
refuses a date it holds, naming the pool; an unreadable pool refuses all.
- Native SickDays cache (fail closed via DayCache); AlarmReceiver skips the
ring with reason "sick_day" (no markFired, no ring_started); StickCheck
verdict sick_day, streak skips sick days; stakes card says so.
- Pre-alarm pool sync: allow-while-idle alarm at 21:00 and A-30 (request
code 1006) runs a headless engine (poolSyncMain) that pulls both pools
from RTDB and rewrites both native caches, so a PC mark arrives with the
app closed. The ring decision stays a cache read.
- JVM unit tests (JUnit 4.13.2) for DayCache, RingDecision,
PoolSyncSchedule, StickCheck; Dart tests; Dart->Python interop check.
pylint hook skipped: verify.py imports sickdays, not in the hook env until
the sickdays-v0.1.0 tag exists; run by hand in a sickdays venv (10.00/10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Xfj1sxKH9VBPqpcAni8Jry
The expectation resolved the next alarm without the earned ramp set, while
the app (correctly) re-arms with the minute the dismiss just earned. On a
non-workday that is one minute apart, so the test failed Fri-Mon on any
Flutter version. It now loads the policy exactly as the app does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FBbkN4ZB4aUPJPzR2prRan
On 2026-09-19 the phone was powered off after the bathroom tag and nothing
on the PC noticed: every finished session was published and nothing read
it. Now wake-alarm distils the phone's morning into an HMAC-signed
~/.local/state/wake_alarm/morning_session.json (wake-alarm-session.timer,
07:00-11:00 every 2 min) that screen-locker and leetcode-guard read to
defer their locks -- provisionally until min(start + 90 min, 09:30) while
the session is live, until 11:00 once it completed inside that cutoff,
and not at all for a session finished later (the phone switched on at
noon completes the legs then; that must un-lock nothing).
The phone publishes the session at start as well as at finish
(current_session, cleared with the finish stamp), so the PC can tell
"started, not finished" from "never started". A required 1-5 energy tap
joins the weigh-in and ships as latest_energy with a PC reader mirroring
_weight (the shared half is _field_reader).
Also fixes the vmbox harness, red since the 2026-09-11 home-tidy: the
guest tree lives at ~/wake-alarm, and the INSTALL-OK grep matched vm's
echo of the command line. Takes Flutter 3.47.5.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Tp54ewdXRLaimUuT8LgYyn
The freshness gate's three findings. gatelock 0.8.1 restructured
LockConfig, which this repo does not use (only log_integrity), so the
pin moves without a code change; pylint stays at 10 against it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HHCbkJWXHjtTUaqvnHRAqA
showDatePicker asserts that initialDate satisfies selectableDayPredicate,
so with today already free the picker asserted in debug and, in release,
pre-selected a disabled day. The cursor now starts on the first non-free
day. And the reason dialog had no Cancel: a barrier tap marked the day
anyway. Both covered by widget tests; the first fails without the fix.
The cross-language check that proved the Dart port was a one-off probe,
deleted after it ran. It is now scripts/free_days_interop/check.sh, a
pre-commit hook on both inputs: Dart writes one pool through every policy
branch, Python replays the same edits into a scratch pool, and every
semantic reading has to agree. The Python package is the oracle -- Dart's
own count compared to what Python reads from Dart's file cannot see a
drift in what Dart writes. Proved by dropping the sticky consumed flag
from release: remaining dart=33 python=32.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019pBgaXSJKyY3DarYpDatDF
The shared pool (~/utils/freedays) was CLI-only: the gates on the PC stood
down, but the phone kept ringing at 08:00 and there was nowhere to mark a
day from bed. This is the one picker for every app.
FreeDayPool is a Dart port of the Python rules with the identical record
shape (id = ISO date; state/consumed/actor/reason on one tick; un-mark is
a state flip, never a tombstone), verified by a real cross-language round
trip: a log written here reads back through freedays.is_free_day and
remaining() with the same verdicts and count, and the PC's live pool reads
here as the same 27 of 35 that `freedays status` prints.
The alarm fires from Kotlin with no engine running, so the pool is
mirrored into a native SharedPreferences set after every mark, release and
sync (channel method setFreeDays), and AlarmReceiver consults it before
starting AlarmService. Fail closed: a missing or corrupt cache rings. All
three branches exercised on the API 36 AVD by broadcasting the receiver.
Firebase only for this namespace -- no GitHub mirror; the alarm record
keeps its own because un-migrated installs depend on it.
Known gap, documented rather than papered over: a day marked on the PC
reaches the phone at the next app launch or picker open, not overnight.
The ring path takes no background dependency by design, so mark on the
phone, or open the app once after marking on the PC.
Verified on the phone (release build, 23181JEGR08034): picker shows the
budget, marks 2026-09-30 with a reason, pushes it to
freedays-sync/devices/<uuid>, releases it with a full refund back to 35.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019pBgaXSJKyY3DarYpDatDF