mirror of
https://github.com/kuhyx/wake-alarm.git
synced 2026-11-22 00:42:19 +01:00
Item 14: the fan ramp is gone entirely. It caused anxiety without helping anyone wake up. Deletes _max_fans/_restore_fans/_find_fan_hwmon, the _AlarmHardware.fan_state field, both call sites, and their tests. wake-alarm-fans.sh and its NOPASSWD sudoers entry come out in the install.sh pass -- dropping a passwordless root helper is a bonus. _alarm.py was 478 lines and the 250-line gate fires on any commit that stages it, so this carries the split it has owed for a while. New modules, each a real seam rather than an arbitrary cut: _gating should-it-run-today + CLI (no time gate; that is _trigger's) _beep_loop the sounding thread, now driving _escalation's planner _alarm_timers self-rescheduling challenge refresh / skip window (mixin) _alarm_state the progress + hardware dataclasses _rounds challenge presentation, re-exporting the view helpers _countdown skip-window arithmetic and demo/production intervals _dismiss_view the post-dismissal banner _screen_flash the ~1.3 Hz attention flash (kept under the 3 Hz threshold) _lock_setup gatelock config + arbiter claim _startup wake display, brightness, plug _tone tone synthesis and cache (out of _audio) _brightness xrandr brightness (was in _audio, never belonged there) main() deliberately stays in _alarm.py: morning_routine/_orchestrator.py:39 hardcodes "wake_alarm._alarm", and moving it is the exact mistake that caused a month-long silent production failure once already. Verified after the split that the module still resolves and accepts --production. Also fixes the plug pre-roll found while researching speakers: main() fired turn_on_plug() and the first beep in the same instant, so an amplifier's soft-start relay swallowed the opening of the alarm. PLUG_PREROLL_SECONDS=4 now sits between them. Two bugs found by running the code rather than by lint: - ruff stripped `struct` from the extracted _tone.py because the import landed before its first usage; only executing it caught the NameError. - test fixtures patched _play_on_all_sinks/_set_max_brightness at wake_alarm._alarm, which silently stopped intercepting once those moved. 404 tests, 100% branch coverage, no new noqa/type-ignore suppressions. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
202 lines
9.5 KiB
Python
202 lines
9.5 KiB
Python
"""Constants for the weekend wake alarm system."""
|
|
|
|
from __future__ import annotations
|
|
|
|
from pathlib import Path
|
|
|
|
# Days the wake alarm is active (Python weekday(): Mon=0 ... Sun=6)
|
|
# Every day of the week.
|
|
ALARM_DAYS: frozenset[int] = frozenset({0, 1, 2, 3, 4, 5, 6})
|
|
|
|
# How many hours after shutdown the PC should wake.
|
|
# Only used by the hibernate fallback path (shutdown-wrapper.sh) for the rare
|
|
# night the PC is actually powered down; the primary path is the per-minute
|
|
# trigger timer, which reads the phone's alarm directly (see _trigger.py).
|
|
WAKE_AFTER_HOURS: int = 8
|
|
|
|
# Minutes after alarm starts within which you must dismiss to earn skip
|
|
DISMISS_WINDOW_MINUTES: int = 30
|
|
|
|
# Hour at which the alarm fires when the phone's alarm cannot be resolved at
|
|
# all — no network *and* no cached read ever written. Minute is implicitly 0.
|
|
FALLBACK_ALARM_HOUR: int = 13
|
|
|
|
# Alarm escalation phase boundaries (minutes from alarm start).
|
|
#
|
|
# Compressed to fit INSIDE the 5-minute failsafe window. They used to be 5 and
|
|
# 15, which -- once the failsafe was added at 300 s -- meant the alarm was
|
|
# silenced before it ever left the softest rung, and the medium and loud
|
|
# phases became unreachable code. The alarm has to reach its most annoying
|
|
# setting well before it goes quiet, or waiting out five minutes in bed is a
|
|
# winning strategy.
|
|
PHASE_SOFT_END: int = 1
|
|
PHASE_MEDIUM_END: int = 2
|
|
# After PHASE_MEDIUM_END: alternating loud tones until the failsafe silences.
|
|
|
|
# Beep intervals per phase (seconds)
|
|
SOFT_BEEP_INTERVAL: float = 5.0
|
|
MEDIUM_BEEP_INTERVAL: float = 3.0
|
|
LOUD_TOGGLE_INTERVAL: float = 2.0
|
|
|
|
# Dismiss challenge: length of the random code
|
|
DISMISS_CODE_LENGTH: int = 10
|
|
# Number of correct code entries required to dismiss the alarm.
|
|
# Requiring more than one round forces the user to stay awake long enough
|
|
# to actually read and type multiple independent codes.
|
|
DISMISS_ROUNDS_REQUIRED: int = 4
|
|
# Seconds the code is visible before being hidden in a flash challenge.
|
|
DISMISS_FLASH_SECONDS: int = 4
|
|
# How often the dismiss code refreshes (seconds)
|
|
DISMISS_CODE_REFRESH_SECONDS: int = 30
|
|
|
|
# State file for wake alarm (HMAC-signed)
|
|
WAKE_STATE_FILE: Path = Path(__file__).resolve().parent / "wake_state.json"
|
|
|
|
# rtcwake binary path
|
|
RTCWAKE_BIN: str = "/usr/sbin/rtcwake"
|
|
|
|
# Preferred alarm audio output (machine-specific, empirically verified).
|
|
# At wake time the Bluetooth speaker is disconnected and PipeWire often has only
|
|
# the auto_null sink, so the alarm activates every card and plays on all sinks.
|
|
# This is the G27Q monitor's built-in HDMI speaker — the one always-present
|
|
# output on this machine — used as the preferred default sink when present.
|
|
ALARM_AUDIO_SINK: str = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
|
|
|
|
# Path to the workout log written by the companion screen_locker package.
|
|
# Dict keyed by YYYY-MM-DD date strings; presence of today's key means the
|
|
# workout was already completed and the alarm should not fire.
|
|
WORKOUT_LOG_FILE: Path = (
|
|
Path.home() / "screen-locker" / "screen_locker" / "workout_log.json"
|
|
)
|
|
|
|
# --- Phone alarm sync (crdt_sync over GitHub) -----------------------------
|
|
# The phone app pushes its alarm to a private repo as a crdt_sync log; the PC
|
|
# reads it back. shutdown-wrapper.sh reads the SAME file with jq for the
|
|
# hibernate fallback — keep the two readers in step if any of this changes.
|
|
|
|
# GitHub token config, key "token" (PAT with "repo" scope: the repo is private).
|
|
# The alarm's escape-hatch history. Lives beside the sync config rather
|
|
# than in the package dir, so a reinstall cannot silently reset the budget.
|
|
ESCAPE_HISTORY_FILE: Path = (
|
|
Path.home() / ".config" / "wake_alarm" / "escape_history.json"
|
|
)
|
|
# How long the alarm must have been up before the hatch is offered, so it
|
|
# is never the easy first move.
|
|
#
|
|
# Deliberately NOT equal to FAILSAFE_SILENCE_SECONDS. Both used to sit at 300,
|
|
# which meant the sound stopped and the escape hatch appeared in the same
|
|
# instant -- making the hatch far more attractive than it was designed to be,
|
|
# exactly when the alarm had just stopped being annoying.
|
|
ESCAPE_OFFER_AFTER_SECONDS: int = 900
|
|
|
|
# Pause between powering the smart plug and the first beep. A powered
|
|
# speaker's soft-start / mute relay typically delays output 1-5 s after mains
|
|
# is applied, so firing the plug and the first tone together loses the opening
|
|
# of the alarm. Costs nothing when no plug is configured.
|
|
PLUG_PREROLL_SECONDS: float = 4.0
|
|
|
|
# When the failsafe silences the alarm. Audio ONLY: the lock, the typed
|
|
# challenge and the workout gate all persist past this point, so waiting it
|
|
# out in bed is not a way to escape the alarm. It exists so a ring nobody is
|
|
# present to dismiss does not sound indefinitely.
|
|
FAILSAFE_SILENCE_SECONDS: float = 300.0
|
|
|
|
SYNC_CONFIG_FILE: Path = Path.home() / ".config" / "wake_alarm" / "sync.json"
|
|
|
|
# Fallback token locations, tried in order when SYNC_CONFIG_FILE is absent.
|
|
# The sibling companion apps already store a repo-scoped PAT for this same
|
|
# kuhyx/syncs repo as a raw single-line file, so reusing one means a single
|
|
# token to rotate instead of three copies drifting out of sync.
|
|
# shutdown-wrapper.sh reads the same list — keep the two in step.
|
|
SYNC_TOKEN_FALLBACK_FILES: tuple[Path, ...] = (
|
|
Path.home() / ".config" / "diet_guard" / "sync_token",
|
|
Path.home() / ".config" / "screen_locker" / "sync_token",
|
|
)
|
|
|
|
# Where a successful read is cached, so a network blip can't cost a wake-up.
|
|
ALARM_CACHE_FILE: Path = Path.home() / ".config" / "wake_alarm" / "alarm_cache.json"
|
|
|
|
# Delays between card-profile reactivation passes while the alarm rings.
|
|
# The G27Q's HDMI sink takes ~15 s to enumerate after the monitor wakes, and
|
|
# until its card profile is switched on the sink does not exist at all -- so
|
|
# re-enumerating sinks alone can never find it. Decaying schedule: dense early
|
|
# (when outputs are still arriving), sparse later, stopping at ~2 minutes.
|
|
REACTIVATE_ATTEMPT_DELAYS: tuple[float, ...] = (3.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0)
|
|
|
|
# Structured logs live under XDG state, not .config: they are churning runtime
|
|
# data, not configuration. The JSONL file is additive -- the journal keeps
|
|
# receiving the same records via stderr.
|
|
LOG_STATE_DIR: Path = Path.home() / ".local" / "state" / "wake_alarm"
|
|
LOG_JSONL_FILE: Path = LOG_STATE_DIR / "events.jsonl"
|
|
|
|
# Fingerprint of the last emitted event, so consecutive duplicates can be
|
|
# suppressed across separate per-minute trigger processes.
|
|
LOG_DEDUPE_FILE: Path = LOG_STATE_DIR / "last_event.json"
|
|
|
|
# The phone's path to its published alarm. Deliberately the *same* logical
|
|
# path on both backends — Firebase's namespace mirrors the repo layout — so
|
|
# only the transport changes, never the parse.
|
|
#
|
|
# This is the *legacy* path: the phone used to be the sole writer under the
|
|
# fixed device id "phone". It still is in practice, but the id is migrating
|
|
# to a per-install uuid, so the reader discovers device directories under
|
|
# SYNC_DEVICES_PREFIX and falls back to this path for a phone that has not
|
|
# yet published under its uuid. Keep reading it until every install has
|
|
# migrated; deleting it early means a stale phone's alarm silently stops
|
|
# being seen, and the trigger falls back to FALLBACK_ALARM_HOUR.
|
|
SYNC_ALARM_PATH: str = "wake-alarm-sync/devices/phone/alarm.json"
|
|
|
|
# The directory holding one subdirectory per publishing device.
|
|
SYNC_DEVICES_PREFIX: str = "wake-alarm-sync/devices"
|
|
|
|
# The file each device publishes its alarm as, inside its own directory.
|
|
SYNC_ALARM_FILENAME: str = "alarm.json"
|
|
|
|
# Names this app's credential cache under ~/.local/share/crdt-sync/, keeping
|
|
# its Firebase refresh token separate from the sibling apps'.
|
|
SYNC_APP_NAME: str = "wake_alarm"
|
|
|
|
# The shared private repo, used only by the GitHub fallback path. Retiring the
|
|
# mirror means deleting these three and _fetch_github_alarm() together.
|
|
SYNC_API_BASE: str = "https://api.github.com"
|
|
SYNC_REPO_OWNER: str = "kuhyx"
|
|
SYNC_REPO_NAME: str = "syncs"
|
|
|
|
# Valid ranges for a wall-clock alarm, used to reject a malformed sync payload
|
|
# or a corrupted cache before it can become a fire time.
|
|
MIN_HOUR: int = 0
|
|
MAX_HOUR: int = 23
|
|
MIN_MINUTE: int = 0
|
|
MAX_MINUTE: int = 59
|
|
|
|
# Timeout for the Contents API read. Short: a slow read must never delay the
|
|
# per-minute trigger tick, and a stale cache is a perfectly good answer.
|
|
SYNC_HTTP_TIMEOUT_SECONDS: float = 10.0
|
|
|
|
# How long a cached alarm is served without re-fetching. The trigger ticks once
|
|
# a minute (so firing lands on the exact minute), but only touches the network
|
|
# when the cache is older than this — bounding phone->PC latency at ~5 minutes
|
|
# while keeping GitHub reads to ~288/day.
|
|
ALARM_CACHE_MAX_AGE_SECONDS: float = 300.0
|
|
|
|
# How long after the alarm instant the trigger will still fire. Covers a
|
|
# suspended PC, a missed timer tick, and a machine booted mid-window. Also the
|
|
# reason a phone alarm moved *earlier* mid-window still fires promptly.
|
|
TRIGGER_CATCHUP_MINUTES: int = 60
|
|
|
|
# The unit the trigger starts. Deliberately the orchestrator, never
|
|
# wake-alarm.service directly: the orchestrator runs the alarm first and the
|
|
# workout lock after, so the two never fight for the fullscreen.
|
|
TRIGGER_TARGET_UNIT: str = "morning-routine.service"
|
|
|
|
# TP-Link Tapo P110 smart-plug config file (JSON).
|
|
# Create with mode 0600 and these keys: host, email, password.
|
|
# Example contents: a JSON object mapping host -> "192.168.x.x", email ->
|
|
# "tapo@example.com" and password -> "your-password".
|
|
# Missing/invalid file => smart-plug control is skipped silently.
|
|
TAPO_CONFIG_FILE: Path = Path.home() / ".config" / "wake_alarm" / "tapo.json"
|
|
|
|
# Timeout (seconds) for a single Tapo plug operation. Keep short so a
|
|
# missing/unreachable plug never delays the alarm by more than this.
|
|
TAPO_TIMEOUT_SECONDS: float = 5.0
|