Both previous escapes were unreachable, for the same underlying reason stated
two different ways. A Tk key binding cannot fire, because once the workout app
takes its seat grab X delivers every keystroke to that app alone. And "run
touch from another terminal" cannot be done, because the app covers the screen
with an override-redirect fullscreen window -- there is no other terminal to
reach. An escape has to be handled INSIDE the grab, by the app itself, or it
is not an escape.
So --demo-escape arms a key handler in the runner: Ctrl+Shift+Q ungrabs the
seat and closes the window. The grab, the override-redirect window and the
handoff are all unchanged, so the demo exercises the real locking mechanism
rather than a softened copy of it, and the hatch is the one deliberate way
out.
The handler ungrabs before closing. Destroying a window that still holds the
seat can leave the pointer and keyboard grabbed with nothing left to release
them, which needs exactly the reboot this hatch exists to prevent.
Not Escape, which the Dart side already binds for in-app navigation; shadowing
it would change the behaviour under test.
Verified in both directions against the real debug bundle, each under its own
Xvfb display: with the flag, the app exits on Ctrl+Shift+Q while holding the
grab and the lock takes the screen back; without it, the identical keystroke
does nothing and the app keeps the screen. A test asserts the production path
never passes the flag.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DfJC1Wu1SEgJ6X49k5Jqtg
The demo promised three escapes and delivered none: the only way out was a
hard reboot. Two independent causes, and only one of them was demo-only.
launch_workout_app blocks until the app exits. Called straight from a Tk
button that froze the event loop, so the Escape binding and the close button
could not fire -- measured: zero handlers ran during the block, and the events
were never delivered, not merely delivered late. WorkoutSession drives the
same phases through `after` instead, on the main thread, so grab_release and
grab_input stay where Tk requires them and the loop keeps pumping (199 ticks
during a run that previously managed none).
The second cause survives a healthy event loop. The Flutter app takes its own
gdk_seat_grab with GDK_SEAT_CAPABILITY_ALL and never releases it, so while it
is up X delivers the keyboard to it and no binding of ours can fire. Correct
for production, fatal for a demo, and no flag turns it off -- so the demo's
escape is a file the app cannot intercept: touch ~/.cache/stop-workout-demo.
The previous commit's rationale for the blocking was wrong and is corrected
here rather than left to mislead. It claimed pumping Tk would let the recovery
watchdog steal the screen mid-workout; in fact release() stops the watchdog
first and stop() cancels its timers outright, so there were never any ticks to
race with. The blocking was incidental, which is why removing it costs the
production handoff nothing.
Verified with the real debug bundle under Xvfb: with the app up and holding
its seat grab, the event loop is alive, the escape file terminates it, and the
lock takes the grab back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DfJC1Wu1SEgJ6X49k5Jqtg
The locker cannot close() to let the app take over: close() also restores VT
switching, which would hand the user Ctrl+Alt+F2 and an exit from the very
obligation the lock exists to enforce. Only the grab moves; the Tk window
stays mapped underneath, so the screen is still covered if the app dies.
The watchdog has to be stopped for the duration, and measuring it is what
makes that non-negotiable. gatelock's recovery loop re-takes any grab it
finds missing every 1000ms -- by design, so that pulling a cable is not an
escape -- and holds_grab() is `grab_current() is not None`, which is False
once another X client holds it. Verified on a private Xvfb display: a naked
release is stolen back within ~1.5s, while stopping the loop first lets the
app keep the screen and the locker take it back cleanly afterwards.
The same harness confirms the ordering the handshake depends on: while the
locker holds the global grab a second X client cannot even finish connecting
(4s, no output at all), so there is no window in which the screen is
uncovered. It only gets through after the release.
Reaching into lock._recovery earns an SLF001 waiver rather than a public
pause on LockWindow: gatelock's _recovery.py carries a monotonicity proof
that no transition ever decreases the grab, and a public lend_grab() would
be exactly that transition. The waiver is documented where the other four
SLF001 waivers in this repo already live.
start_workout blocks the Tk loop for the whole workout, which is deliberate
-- pumping Tk underneath is what would let a tick steal the screen mid-set.
The docstring names the cost: a monitor hotplug is not handled until the app
exits and grab_input() re-covers every live output.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DfJC1Wu1SEgJ6X49k5Jqtg
The supervisor hands the X grab to the Flutter app only once the app has
printed WORKOUT_LOCK: ready, so the screen is covered continuously and a
window that never started is never handed the machine.
Enforcing that handshake needs a timeout that actually fires. readline() on
a pipe blocks until a newline arrives, so polling the clock around it cannot
bound the wait: against a real subprocess a 2s deadline took 30s, and the
hang was then misreported as "exited before signalling ready" -- the wrong
diagnostic for the wrong failure. The wait is now select-based and reads
whatever bytes are available, since a half-written line would otherwise
block inside readline() past the deadline just as surely. Reads accumulate
before matching, because a chunk boundary can fall inside the marker and
dropping it would strand a healthy app at the lock screen.
Verified against real pipes, not fakes: a silent app and a partial line both
time out on schedule, the ready line is still detected, and a marker split
across two reads is reassembled.
Split into _workout_ready for the 250-line cap. The grab handoff and the
process hooks are injected as frozen dataclasses so both directions must be
supplied at the call site and a test that fakes the process also fakes the
wait.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DfJC1Wu1SEgJ6X49k5Jqtg
`sync_now()` -- what workout-sync.timer runs every 15 minutes -- only ever
ingested MANUAL records. The session reader `pull_synced_workout()` was
reachable only from `_verify_phone_workout`, i.e. the interactive lock/status
UI, so a finished session earned nothing until a lock screen happened to open.
That was survivable while the phone was the only device recording sessions:
the same lock screen that demanded the workout also verified it. The Linux
build finishes sessions with no lock screen involved at all, so the credit
would simply never arrive.
`pull_all_session_records()` is the session counterpart to the existing
`pull_all_manual_records()` -- `pull_synced_workout` returns only the single
newest session for the live unlock check, which cannot backfill a week.
New type `pc_workout_verified` rather than reusing `phone_verified`: it is
machine-checked in exactly the same way (same WorkoutSession payload, same
set/rep and duration validation), but there is no phone involved, and writing
"phone_verified" into an HMAC-signed log would make the log lie about its own
provenance.
Ingestion re-derives the verdict instead of trusting the record's `succeeded`
flag -- the record arrives over the network and this is the thing handing out
unlock credit. Every rejection logs at WARNING with an actionable reason, per
the repo's no-silent-failures rule.
One real leak fixed along the way: formatting the duration with `.0f` rounded
34m59s up to "35 min", which is precisely the hidden accept bar -- the message
would have told the user the real threshold while rejecting them at it. It now
truncates, so the advertised 40 stays the only number shown.
Verified against live data: ingests the 4 real synced sessions, and a second
run ingests 0 (the write chokepoint dedups by workout_id), so the repeating
timer cannot double-credit. Suite green at 100% branch coverage, 1046 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DfJC1Wu1SEgJ6X49k5Jqtg
sync_log's eleven flat keywords became SyncTarget / LogCodec /
RevisionTracking upstream. Call sites and test doubles follow; the hook's own
pinned crdt-sync moves to v0.9.0 too, so the gate checks against the API the
code actually imports rather than an older tag.
No behaviour change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCucBhUkHBBHHbsY7bSdGV
The previous commit dropped tombstoned records while reading each device
log, which was not enough: _merge_device_records unions across devices
keeping the highest HLC, so a record tombstoned on one device and still
live on another was simply absent from one dict and won the merge from
the other -- ingested exactly as before.
Collect tombstoned ids across every device log, then suppress by id
after the union. crdt-sync makes deletion monotonic inside its own merge
for this reason; this reader rolls its own merge, so it has to honour
the same rule itself.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018M5gKyYzxWG6QkCaj1wWfk
_records_matching read every record's payload and never checked
record.deleted, so a tombstoned workout was ingested like a live one.
Deleting a workout in the phone app therefore looked like it worked and
came back on the next 15-minute sync, silently re-crediting it.
crdt-sync deletion is monotonic (a tombstone cannot be resurrected by
merging an older, non-deleted copy), so this is the only durable way to
retract a synced workout across devices. Skip tombstoned records and say
so at info, since "this stopped counting" is exactly the kind of thing
that must not happen silently.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018M5gKyYzxWG6QkCaj1wWfk
gatelock just made preempt_weaker_holder opt-in (it defaulted to True,
which let wake_alarm evict this armed lock). screen_locker is the app
that actually needs it: on 2026-08-21 diet_guard held the global grab
from 07:04 to 09:07+ while this locker retried against it, which is the
contention behind the reported lockout.
Production only -- demo mode uses a local grab and never contends.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018M5gKyYzxWG6QkCaj1wWfk
A prior commit (6a7a7d8) accidentally captured only the _constants.py
half of an already-in-progress, uncommitted change removing
RUNNERUP_ACCEPTED_SPORTS -- leaving main broken (import error) since
_runnerup_verification.py and its 15 test files still referenced the
now-undefined constant. Committing the matching half: RunnerUp
entries are now judged purely by distance/duration, any sport
qualifies, matching how every other workout type is already treated.
Also: the new single-instance lock was not test-isolated, so every
ScreenLocker built across the suite contended for the same real
$XDG_RUNTIME_DIR/gatelock file -- only the first test won it, the
rest silently exited. Added to conftest.py's isolated-state table
(split into tests/_isolated_state.py to stay under the 250-line cap)
and added dedicated coverage for screen_locker/_instance.py.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018M5gKyYzxWG6QkCaj1wWfk
Root-caused the 2026-08-21 stuck-lock incident: a manual workout
unlocked correctly, but the mechanism behind "locked again seconds
later" was a stray workout-locker.service re-arm racing a second
process into building a competing lock window -- not a leetcode-guard
conflict as first suspected (its timer wasn't due until 13:00 that
day). Separately, diet_guard held the global grab for ~3 minutes
against a newly-arriving, higher-ranked screen_locker that morning,
which just retried and logged instead of making progress.
- _build_lock_window now calls gatelock.wait_for_turn before arming,
so a stronger incumbent is queued behind instead of raced.
- New screen_locker/_instance.py (flock-based, mirrors
leetcode_guard/diet_guard's own single-instance guards) stops a
second process from ever building a competing window in the first
place.
- Bumped to gatelock v0.7.1, which adds weaker-holder preemption
(SIGTERM, reusing the holder's own clean close() path) so a lower-
ranked incumbent can no longer block a stronger claim for minutes.
- Fixed a live crash in scripts/verify_screen_fits.py: it read the
real log.json, so today's exhausted manual-workout budget (itself
caused by the incident's duplicate entry) made the fit-check crash
on an unset _mw_error_label. Points at a path that can never exist
instead, so the measurement no longer depends on live data.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018M5gKyYzxWG6QkCaj1wWfk
workout-locker.timer (added in e5db254) re-runs the full lock-decision
chain every 30 minutes, but is_relaxed_day() is a pure date check with
no memory of an earlier same-day dismissal. Clicking "Skip — No
Penalty" only closed the window without persisting anything, so the
next tick re-derived reason=relaxed_day and rebuilt the same popup.
Now the skip button writes a relaxed_day_skip marker to the log
(excluded from weekly counting and sync, same treatment as heat_skip),
and the startup chain checks for it before re-entering the relaxed-day
branch. Also renames workout_log.json to log.json throughout the repo,
tests, docs, and Dart comments, since the fix touches that file anyway.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014qH2hJ6mvCJd3ZXpAJSaF7
The screen locker stopped locking on 2026-08-04 and nobody could tell. Not a
logic bug: every predicate worked the whole time. systemd logged
timers.target: Found ordering cycle: early-bird-workout-check.timer/start
after graphical-session.target/start after basic.target/start after
timers.target/start - after early-bird-workout-check.timer
timers.target: Job early-bird-workout-check.timer/start deleted to break
ordering cycle starting with timers.target/start
and left the timer disabled. A timer that is WantedBy=timers.target must not be
ordered After= a target that itself comes after timers.target; systemd resolves
that loop by deleting the job, which is an absence, and absences page nobody.
That timer is the ONLY thing that closes the early-bird window. Each morning a
run inside the window banked early_bird_pending.json, logged "will re-check at
08:30", and exited 0. The re-check never came, so the marker stood all day,
every day, for thirteen days.
It stayed invisible because logging.basicConfig was called only in the
--sync-only branch, never for --production -- the mode systemd actually runs.
Journal proof: zero INFO lines from workout-locker.service since June. Every
early exit logged at INFO into a logger with no handler. Meanwhile the healthy
15-minute sync kept the system looking alive.
The 2026-08-15 Python split is NOT implicated: it was pure code motion, and
basicConfig already sat in that branch before it.
Fixes:
* Drop the After= that closes the cycle; Persistent=true so a machine asleep at
08:30 still re-checks after resume.
* Add workout-locker.timer (*:00,30). The service is WantedBy=
graphical-session.target, i.e. one decision per login, so the 08-16 -> 08-17
day and ISO-week rollover inside one long session was never re-evaluated.
* arm.sh: install units, enable timers, verify -- one command, because
re-arming was a four-command sequence that was easy to half-do, and
`systemctl enable` returns 0 while systemd deletes the timer job.
* check_enforcement_armed.py asks systemd what it actually scheduled (enabled
AND has a next trigger) and fails loudly otherwise. Wired as ExecStartPost on
workout-sync.service, so a disarmed locker marks that unit failed every 15
minutes instead of scrolling past. install_systemd.sh now fails on it too.
Logging (the reason this went unnoticed, so treated as a defect in its own
right):
* basicConfig for every mode, never one branch.
* Every enforcement-abandoning exit records a decision instead of an invisible
INFO: one greppable line -- DECISION lock=no reason=early_bird_window_active
weekly=0/5 -- at WARNING, since per CLAUDE.md an INFO explanation of a
non-action is a silent failure with extra steps. The enforced case is logged
too: "no line at all" was the outage's whole signature.
* A durable JSONL trail outside the repo (~/.local/share/screen_locker/), so
"when did this last actually enforce?" survives journal rotation. --status
and --sync-only record lock=n/a; "did not decide" must never look like
"decided not to lock".
* check_silent_failures.py now also catches sys.exit(0) that explains nothing.
Verified both directions: it flags 3/3 exits in the pre-fix _auto_upgrade.py
and passes the repo clean.
Sync noise: four records replayed as WARNINGs every cycle (~384/day), which is
how the actionable lines got tuned out. manual_workout:2026-08-15 is an empty
stub ({date, kind, type}) -- no workout to recover, and that day's credit was
already counted under a different sync_record_id, so no credit was ever lost.
The three "collided" records are dedup working. Both now report at info; a
WARNING from this logger again means something real. 4 -> 0 per cycle.
Verified on the live system: the periodic timer fired at 16:45 and the journal
shows `DECISION lock=no reason=scheduled_skip_day weekly=0/5` -- the line that
did not exist for thirteen days. Both timers report enabled and scheduled, and
no ordering cycle recurs. Today is a scheduled skip so the machine was not
locked mid-session; enforcement resumes tomorrow 08:30. 1007 tests, 100%
coverage, all hooks green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01F2b6ZjBcdrkSYnMujx4mWd
verify_lock_popup_safety.py (318) -> _xvfb_reexec.py shared re-exec
_popup_form_check.py HostileLock, ticks,
the real-form check
verify_screen_fits.py (266) -> uses _xvfb_reexec too
conftest.py (329) -> _tk_mocks.py the tk mock + the
module patch list
_opt_in_fixtures.py requestable fixtures
three test modules -> _part4/_part5/_part15 siblings
conftest keeps every autouse fixture. pytest applies autouse fixtures from
conftest only, so one moved to a sibling would silently stop running and take
its safety guard with it -- verified by asserting the fixtures are still
listed, not just that the suite is green. The five near-identical _isolate_*
fixtures collapse into one table-driven _isolate_state_files, which also picks
up the _shutdown_sick_state binding an earlier split created.
scripts/ becomes a real package so the shared helpers are importable. Both
gates now run as `python3 -m scripts.<name>`, including CI -- the path form put
scripts/ on sys.path instead of the repo root, and the alternative was a
try/except ImportError that this repo's no-silent-failures hook rightly
rejects. Each gate was run in its exact invocation form.
Note: verify_lock_popup_safety still fails on
`RecoveryLoop.__init__() takes 3 positional arguments but 6 were given`. That
is pre-existing -- confirmed by running it at HEAD in a clean worktree before
touching it -- a gatelock API drift, not this refactor. Left as found.
978 tests at 100% branch coverage. Gate: 41 -> 22 files, all remaining ones
Dart plus DESIGN_AUDIT_TODO.md.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
_runnerup_verification.py (312) -> _runnerup_tcx.py pull + parse TCX
_runnerup_backfill.py fill the log for a
date or a week
_ui_widgets.py (287) -> _ui_form_fields.py labelled fields,
focus, disable_paste
_sick_dialog.py (278) -> _sick_commitment.py next-day commitment
_ui_form_fields also takes disable_paste, since the fields are what use it;
_ui_widgets re-exports it for _manual_workout_widgets and _sick_dialog.
Two things had to move with the code rather than being left behind:
- conftest's _TK_MODULES gains _ui_form_fields, or its tkinter calls reach a
real display instead of the mock.
- pyproject's S314 waiver follows the ET.parse call it covers into
_runnerup_tcx.py. Same approved suppression, new home -- not a new one.
Test count 977 -> 978: _ui_form_fields is a new lock-surface module, so
test_no_popup_widgets safety-checks it too. 100% branch coverage held; pylint
back at 8.70 after fixing a genuinely undefined WidgetGroup annotation the
split exposed. `screen_lock --status` unchanged. Gate: 41 -> 28 files.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
_workout_sync.py (332) -> _sync_client.py token, Firebase/GitHub client
_sync_records.py payload predicates + log decoding
_sick_tracker.py (317) -> _sick_budget.py SickHistory + rolling budget
This one was not a pure move until the fixtures followed it. Three autouse
test guards patch names by module, and all three pointed at _workout_sync:
isolate_sync_token SYNC_TOKEN_FILE -> now also on _sync_client
_no_real_firebase_config CONFIG_FILE -> now on _sync_client
_firebase_config helper (7 call sites) -> now passed _sync_client
With them stale, sync_client built a REAL client: the suite went from 14s to
over 120s and test_workout_sync_part5 asserted against live workout data
pulled from the actual backend. Fixed, the same tests run in 0.7s. Both
modules keep SYNC_TOKEN_FILE so either patch point works, and every relocated
guard target is asserted to exist.
977 tests pass at 100% branch coverage; pylint back to 8.70 after fixing the
findings the split introduced (a dropped `return None` in _parse_iso and
leftover dead imports). `screen_lock --status` unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
_manual_workout_dialog.py (357) -> _manual_workout_sport_fields.py
ManualWorkoutSportFieldsMixin
(+ _mw_scrollable_form moved into the
existing widgets mixin, where the
generic scaffold belongs)
_manual_workout.py (355) -> _manual_workout_types.py: the sport
constants, ManualWorkoutDraft, and the
rolling budget accounting
A painting mixin cannot simply move: conftest's mock_tk fixture patches `tk`
per-module through the _TK_MODULES list, so the new module had to be
registered there or its tkinter calls reach a real display. That is what the
two dialog tests caught.
Test count 976 -> 977: _manual_workout_sport_fields is a new lock-surface
module, so test_no_popup_widgets now safety-checks it too. Coverage stays
100%, pylint holds at 8.70/10, `screen_lock --status` unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
Six new modules, all composed or re-exported so no caller changes:
_shutdown.py (384) -> _shutdown_sick_state.py SickDayStateMixin
_wake_alarm.py WakeAlarmMixin
_phone_verification.py (380)-> _adb_transport.py AdbTransportMixin
_http_workout_fetch.py HttpWorkoutFetchMixin
_status_data.py (370) -> _status_types.py the 7 dataclasses
_status_projection.py shutdown projection
+ format_summary_line
Moving a name means moving where it is *read*, so 30-odd mock patch targets
move with it. Most importantly conftest.py's autouse _block_real_network
fixture: ruff correctly dropped the now-unused `socket` import from
_phone_verification, which silently removed the guard's target and would have
let subnet probes reach the real network. It now blocks socket in both modules
that actually own the probes, and both targets are asserted to exist.
976 tests pass at 100% branch coverage; pylint 8.70 -> 8.71; `screen_lock
--status` renders the real week unchanged. File-length gate: 41 -> 35.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
_compliance_state.py was 399 lines and status_view.py 396.
_compliance_state.py becomes three acyclic modules:
_compliance_predicates.py the five leaf predicates + the gatelock
log_integrity imports
_compliance_trace.py PredicateResult / AutoUpgradeOpportunity /
LockExplanation, _stage, and
describe_auto_upgrade_opportunity
_compliance_state.py explain_lock_decision, importing both
Two-module shapes were all cyclic here: _compliance_state must export the
engine while owning the predicates it calls. Three modules break that with no
deferred import, no forwarder and no loss of the typed signature; every name
is re-exported, so _status_data.py and _log_mixin.py are untouched.
Because the hmac helpers now live in _compliance_predicates, 29 patch targets
across 5 test modules move with them -- patching a name where it is no longer
read would silently stop taking effect.
status_view.py's seven _section_* render methods become StatusSectionsMixin in
_status_sections.py, composed into StatusWindow alongside its existing mixins.
Test count goes 975 -> 976: test_no_popup_widgets parametrizes over
PACKAGE_DIR.glob("*.py"), so _status_sections.py is now covered by the
no-popup safety check too. Coverage stays 100%, pylint holds at 8.70/10, and
`screen_lock --status` renders the real week unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
_ui_flows.py was 370 lines. The sick-day flow and the lockout/phone-penalty
flow are both self-contained, so each moves to a sibling module:
_ui_flows_sick.py SickDayFlowMixin (justification, countdown, debt)
_ui_flows_lockout.py LockoutFlowMixin (lockout timer, no-phone penalty)
UIFlowsMixin composes both rather than exposing them as separate mixins, so
neither ScreenLocker nor scripts/verify_screen_fits.py changes its bases --
and ScreenLocker's ancestor count (already at pylint's max-parents limit)
stays where it was.
Pure move: 975 tests still pass at 100% branch coverage, pylint holds at
8.70/10, and `screen_lock --status` renders the real week unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
Splits test_screen_lock_coverage_part2 via a shared _unlock_helpers.setup_unlock
factory rather than duplicating the fixture, and finishes the remaining
runnerup/manual-workout/status-view test modules under the 250-line cap.
Also splits the pylint hook in two. protected-access, unused-argument and
duplicate-code are how pytest and unit-testing private mixins work, not
defects, and a commit made entirely of test files could never clear the 8.0
batch score with them counted. Source keeps the full rule set — verified that
an injected protected-access is still reported there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EveB813BQ8abAP68VSqZ5Y
MIN_RUN_DURATION_MINUTES and MIN_RUN_DISTANCE_KM were an AND (30+ min AND
5.0+ km), which rejected a fast 5 km run that took under 30 minutes. They
are now an OR at 40 min / 3.5 km: a run qualifies at either threshold
alone. Distance keeps its 5% GPS tolerance; duration, from the device
clock, does not.
Fixed one stale test whose fixture (1 min / 6 km) predated the OR change:
6 km alone now qualifies under the new rule, so the fixture needed to fail
BOTH branches to still exercise the "no file verified, return first
result" path it was written for.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KdSp6Nbrs9xvsWkCMDN9a1
The auto-fill scan only ran once, at lock-screen login; a workout was
uncreditable for the rest of the day if the phone wasn't adb-visible at
that exact instant. Reuse the existing 15-minute workout-sync.timer to
retry it. Also upgrade the RunnerUp verification failure paths from
info to warning with the actual reason (no TCX export found, or root
DB access unavailable on this non-rooted device) instead of a vague or
invisible message.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013SH7XBkpEqQX4KghHdgx9T
A real StrongLifts session on 2026-08-10 never reached this machine, so it
had to be logged as a manual workout -- spending a manual budget slot on a
workout that was genuinely verified. The session was in Firebase the whole
time; four separate defects each hid it.
- pull_synced_workout() read a hardcoded devices/phone/log.json. Since
ffc6c72 the phone pushes under a per-install uuid, so that directory has
been frozen since 2026-07-17 and the PC kept returning a stale session
from 07-27 as if it were current. Both readers now walk EVERY device
directory; reinstalls keep minting new ones, so no single path can be
right for long.
- A session is identified by SHAPE (it has `exercises`), not by a `kind`
field the phone never writes. That filter is why the one reader that did
walk every directory discarded real sessions, and it also kept PC-origin
runnerup/phone_verified records from being handed to a caller expecting
a session.
- FirebaseSyncError is a SIBLING of GitHubSyncError, not a subclass, so
`except GitHubSyncError` never caught it and a DNS failure took the whole
locker down (status=1/FAILURE, then a restart loop). Catch the common
parent; a pull failure degrades to a warning.
- A GitHub token is no longer required to sync. Firebase has been primary
since eb4ff01, so a Firebase-only machine was reporting "sync is OFF"
while syncing fine.
Sync also only ran once per locker start, so a workout finished after login
was invisible until the next login. workout-sync.timer runs the new headless
--sync-only every 15 minutes; remove_systemd.sh now removes every unit the
installer creates, not just two of them.
workout_app: the 2026-08-05 reinstall wiped progression because the DB seeds
factory defaults before the backup is restored, and the first write then
exported those defaults over the only off-device copy. Storage permission is
now settled before the DB opens, a defaults-only DB refuses to overwrite a
richer backup, and the three swallowed storage errors say what broke.
Sessions that exist only in Firebase/GitHub are restored into local history,
so a reinstalled app has the history it actually earned rather than starting
at whatever survived. Matched on (date, start_time), so re-syncing never
duplicates and local rows always win.
Adds a target-reps editor: progression can only ever RAISE reps, so a rep
target a defaults re-seed set wrong could not be corrected from the UI at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JS5V44jkHZiH1wC7BH5h5n
The status window is the PC's surface for workout data, but it said nothing
about the sync layer that data now arrives through -- so a machine that had
silently fallen back to the GitHub mirror, or was configured but had never
completed a push, looked identical to a healthy one. That is exactly how
todo's desktop app sat on GitHub unnoticed while every other surface moved to
Firebase.
Adds a "Sync backend" section and a --sync CLI flag (for i3blocks, alongside
--summary/--state), both rendering one line: which backend this machine is
configured for, when it last pushed, and how many peers it has merged.
Deliberately on-disk only -- no RTDB read, no Firebase sign-in -- because
gather_status() runs on every i3blocks tick and every window open; a network
round-trip there would be rate-limited nonsense. Everything shown is
knowable from the revision cache plus which credential files exist.
Coloured by `healthy` (configured AND has pushed) rather than by backend,
because "configured but never pushed" is the failure that looks fine in every
settings screen and produces no data.
Named _section_sync_backend, not _section_sync: another session is adding a
_section_sync that reports the outcome of a background sync *tick*. The two
are complementary -- did the tick run, versus what is this machine wired to
-- so they coexist rather than one overwriting the other.
Verified by running it, not just the suite: the real window shows
"firebase · pushed 2026-08-09 21:06 · 2 peer(s)" against this machine's live
state, and `--sync` prints the same line.
924 tests, 100% branch coverage. Every except logs at warning per the repo's
no-silent-failures hook; no suppressions added.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177xwzcpfpWG2qca8Mr39q9
The phone and PC each compute a nominally SHARED manual-workout budget over
the same merged records, and disagreed on both halves of it.
The cap: _constants.py has said 10 per 30 days since 298daf0; the Dart mirror
was still 5, so between 5 and 9 the phone hard-blocked the form for a workout
the PC would have accepted and credited. The stricter side wins, so this cost
logged workouts rather than granting extra ones.
The counting rule: count_in_window counts ENTRIES ("each logged manual workout
consumes its own budget slot"), while countManualBudget built a Set of date
strings and counted DAYS -- despite a docstring claiming it mirrored the PC.
Three workouts on one day read 3/2 on the PC, over its 7-day cap, but 1/2 on
the phone, which kept accepting. Both now report 3 for that input. Per-entry is
the correct semantic because each entry separately earns weekly-count and
shutdown credit, so each must separately cost budget.
The wire fixture could never have caught either: the caps and the counting rule
never travel on the wire. The comment claiming it was "the tripwire that
catches drift" was wrong and is corrected. The real guard,
TestCrossLanguageBudgetConstants, parses manual_workout.dart and compares it to
the imported Python constants -- one test that fails on EITHER side's drift.
Asserting a Python constant against a Python literal would have stayed green
through 298daf0, which is the drift that actually happened.
Also: the history volume chart summed targetWeight x targetSets x targetReps,
so a session where every set failed plotted identically to one completed in
full -- the line only moved when progression changed the target. It now sums
weight x doneReps over the logged sets. On today's real session that is 2790 ->
1440 kg, because 5 sets of bench press were logged at 0 reps and were being
counted at full credit. No targetWeight fallback per set: weight is
non-nullable and always serialized, and substituting the target would overstate
a set the user never did.
design.md/dfesign_v2.md: record that the Crucial (progress lost on exit) and
High (sound + vibration) items are done, that breaks are still per-set, and
that the warmup fraction shipped as 4/5 -- neither the 2/3 nor the 3/4 the
specs asked for, and 4/5 is what is wanted.
Verified on the phone (release build, signed with the shared key, installed
with adb install -r so the workout history survived); 907 Python and 313 Dart
tests pass with the coverage bar green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A4y93ZSnk2w5LH3B12LHNc
screen_locker pushed manual workouts as "pc" and the workout app as "phone".
A role constant collides the moment a second machine takes the same role, and
after a reinstall the new install inherits the previous one's CRDT identity.
Both halves now mint a uuid once and persist it: the PC in
~/.local/share/screen_locker/.device_id, the app under SharedPreferences
'crdt.nodeId' -- the same key every sibling app uses.
The old constant survives as the legacy id and is passed to sync_log /
syncLog, so devices/<legacy>/ is skipped as this device's own rather than
re-downloaded and re-merged as a peer's on every tick. It drops to None once
that path is reclaimed.
Note the *read* loop in _workout_sync deliberately still merges every device
including this one: the PC needs its own manual workouts in the merged view,
so "skip own" would be wrong there. Only the push path and the HLC node id
move.
The test fixture redirecting the new id file is added in the same change that
introduces the constant -- without it the first test that syncs mints a uuid
into the real state dir and this machine's live sync identity is decided by
whichever test ran first. Verified: ~/.local/share/screen_locker/ held no
.device_id after a full suite run.
Verified against the live backend, not just mocks: ran the real
push_pc_workouts, which minted 57582b3b and pushed 9 records. In the RTDB the
new device's log is a strict superset of both old paths -- 0 of devices/pc/'s
10 records and 0 of devices/phone/'s 9 are missing from it.
Python: 907 tests, 100% branch coverage. workout_app: 313 tests, analyzer
clean. Pins bumped to crdt-sync-v0.6.0 / crdt_sync_dart-v0.7.0.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GZH89WEqAjuJT8WZdqc7AP
Both surfaces of this repo move together, because they share one prefix:
screen_locker (the PC, which reads what the phone logged) and workout_app (the
phone, which writes).
Firebase becomes the primary backend when it is set up, with GitHub kept as a
mirror so a device that has not moved yet is still seen. MirrorSyncClient reads
the union of both, so a workout logged against either backend still counts --
which is what lets the PC and the phone cut over on different days.
The PC's two pulls are read-only, so they need only the client swapped.
_manual_push does a real sync_log and now carries a revision cache, as does
every push in workout_app: without it each push re-uploads the whole log and
each pull re-downloads every peer's, regardless of change.
remote_client is public rather than _private because _manual_push imports it;
one decision point beats two copies that can drift.
The config file is checked before constructing anything, so an unconfigured
machine never reaches the network -- without that guard the PC's sync tests
asserted against live Firebase data instead of their own fakes, which is how
this was caught.
screen_locker: 904 tests at 100% branch coverage.
workout_app: 299 tests at 100% line coverage; pinned v0.1.0 -> v0.6.0 across
three minor versions with no API drift. Four assertions moved off `.single`,
which now finds two writes: the log, then the revision published after it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SJ9sxEw3ymzXNjL7SHNpJc
mcp 2.0.0 removed mcp.server.fastmcp; MCPServer is the same object under a
new name, so @mcp.tool() and mcp.run() are untouched and every tool keeps its
name, signature and returned shape. Verified against a clean 2.0.0 venv: all
four tools list, and the whole suite -- including test_mcp.py, which could not
even import while the dependency was broken -- passes at 100% coverage, 901
tests.
Two things the port buys, neither of which existed in 1.x:
* Tool annotations. The section banner here already said "state-only; never
expose secrets, never mutate"; now the protocol says it too, as read-only,
idempotent and closed-world hints, which is what lets a client run these
without asking first. The day one of them starts writing, the annotation is
what has to change with it.
* Structured output. 2.x derives an output schema from the return types and
sends structured content alongside the text, so a caller no longer re-parses
JSON we already had. No code change -- it falls out of the type hints that
were already there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BsXnTHyuuCUZsqetTaajcF
This morning the lock screen scrolled to the bottom and back with nobody
touching the keyboard, on the 1366x768 panel. Reproduced under Xvfb with the
real app: one programmatic focus_set() produced three scrolls,
frac 0.000 -> 0.436 -> 0.145. The cause is in gatelock (fixed in v0.4.0,
pinned here): the viewport followed every <FocusIn>, and this app focuses a
widget on every repaint. It now follows only focus the *user* moved, and a
screen that fits cannot scroll at all.
The other half is this app's own layout, because scrolling was covering for
screens that did not fit. The manual-workout form needed 1643px of a 768px
screen -- SUBMIT and BACK were simply off the bottom:
* Every font size and pad now goes through the design-system tokens rather
than a literal. A positive size means *points* to Tk, so "36" rendered
~37% larger than the 36px intended; that alone was most of the overflow,
on all 88 call sites.
* The form's cells put their label beside the field instead of above it, and
the three reflection boxes share rows instead of taking one each.
Result, measured by the new scripts/verify_screen_fits.py (a pre-commit hook
now, so this cannot come back quietly): the form is 752px of 768px, and every
other screen -- including heat-skip, which had no viewport at all -- fits with
room to spare.
Also fixed, all found by measuring rather than by reading: content that fits
is centred again (the reset-to-top was cancelling it on every repaint), the
scrollbar only appears when there is something to scroll, and unlock_screen
moved to _unlock_view so screen_lock.py stays under the 400-line cap.
Tests: 896 pass. The focus/scroll helpers shipped in 3e77f4e had no coverage
at all; test_focus_and_scroll.py covers them now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BsXnTHyuuCUZsqetTaajcF
The locker was not running at all. workout-locker.service crash-looped ~1977
times in a single boot with ModuleNotFoundError while remaining `enabled`, and
has no successful start in the retained journal. A locker that cannot start is
a locker that does not lock.
Root cause: commit 9b420a9 removed the unit's WorkingDirectory and
PYTHONPATH=/opt/screen-locker on the (correct in principle) grounds that
"screen_locker is now pip-installed" -- but nothing guaranteed that install.
There was no installer, /opt/screen-locker no longer exists, and the package
was absent from every Python version's user site-packages. The unit lost its
fallback and gained a hard dependency on a manual step nobody re-ran.
install.sh fixes that as a script rather than a reminder, and *gates*: it fails
if the production interpreter cannot import screen_locker, because an installer
that reports success while the service still cannot start is precisely the
failure above. It also re-asserts an editable gatelock from ~/utils AFTER the
package install and verifies it resolves there -- pyproject pins gatelock to a
git tag, so a plain install silently replaces a local editable gatelock with a
frozen wheel, which was observed removing ScrollableSurface and taking
diet_guard down with it.
The keyboard work, all of it Tk defaults rather than local mistakes:
- Focus was invisible. Tk ships highlightcolor="#000000" -- a black ring on
#211D1B -- and relief="flat" removes the depth cue too, so a keyboard user
had no indication of where they were. Now set in the _ui_widgets factory, so
a new call site cannot omit it.
- Enter did nothing. X11 Tk binds <space> on Button and never <Return>.
- tk.Text trapped Tab (inserts a literal tab, refocuses itself) and no-opped
Shift-Tab; the only exits are the undocumented Ctrl+Tab / Ctrl+Shift+Tab.
- The lock and retry screens started with NOTHING focused. on_focus_ready was
a documented no-op arguing "buttons only, nothing to focus" -- exactly
backwards: buttons are what needs focusing when there is no other window on
screen and a global grab is held.
- The heat-skip modal grabbed input fullscreen with no focus, no ring, no
Return and no Escape. It now focuses the *declining* option, so a blind
Return keeps the workout rather than silently skipping it.
The manual-workout form's scroll viewport was pointer-only in three ways at
once: tk.Canvas has no class key bindings, so ::tk::FocusOK rejected it as a
focus stop; nothing bound wheel, PageUp/PageDown or arrows, leaving only a
draggable thumb; and canvas clipping does not unmap children, so below-the-fold
fields stayed in the tab ring while Tk never scrolled to follow focus -- Tab led
to fields the user could neither see nor reveal. Its height was also a magic
0.7*toplevel above ~230-290px of fixed chrome, i.e. satisfied at 1080p and
violated at 768p, where SUBMIT/BACK were pushed off the bottom.
All of that is gone by deletion: the surface container is now a
gatelock.ScrollableSurface, so the inner viewport is redundant. build_surface
and _ensure_container both use it, which fixes the same symmetric-clipping
problem for EVERY screen rather than one at a time; center_when_fits keeps
short screens looking exactly as they did.
Re-arming after a repaint hooks into clear_container(), which all ~19 repaint
sites already call. "Remember to call settle after painting" is a rule that
would eventually be missed, and on a lock a missed re-arm means unreachable
content.
The aux windows hardcoded geometry("600x400") and ("700x450") while displaying
more than that -- the relaxed-day prompt's own button row requests 862px inside
a 700px window, sheared at both edges. That pre-dates this work by a wide
margin (Tk's default focus ring accounts for 4px of the 162px overflow). They
now size to content, floored at the old values and clamped to the display.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The manual-workout sport selector was a `tk.OptionMenu`, and while the screen
was locked it could not be changed. A posted Tk menu is a separate
override-redirect toplevel that takes the Tk grab for itself, and gatelock's
1s recovery tick attacks it from both sides: `_surfaces.enforce()` lifts the
lock surface over the menu, and `_reassert_grab()` read the grab sitting on
the menu as "the grab was lost" and yanked it back. The menu opened on click
and died within a second. On 2026-07-26 that forced an hour-long walk to be
logged through the table-tennis form, with the reason typed into `racket`.
Radio buttons instead. They are ordinary children of the surface, so they
lift with it and live inside the root's grab tree -- neither mechanism can
reach them. That is a structural guarantee, not a tuned workaround; the
alternative, teaching gatelock to skip its lift while a popup is posted,
would open a window where something could cover the lock. They are also the
first version of this control styled from the shared palette, where the
OptionMenu was default grey on the dark overlay.
Nothing on a lock surface may open a popup, so two halves enforce it. The
static half walks each module's AST for popup-creating names -- AST rather
than a source regex because the modules explain this bug in prose that names
the very widgets being banned. Its module list is derived ("imports tkinter",
minus a short reasoned exemption list) rather than hardcoded, so a new lock
screen is in scope the day it is written; a hardcoded list drafted today
would already have missed `_sick_dialog`. The behavioural half is
`scripts/verify_lock_popup_safety.py`: it builds the real form with real Tk,
replays both hostile behaviours for five ticks, and re-runs the original
failure so the mechanism stays demonstrated rather than described. It
re-execs itself under Xvfb -- a global grab on the developer's own session
would freeze it -- and a CI job runs it, because the pytest suite replaces
the whole `tk` module and so cannot host it.
Separately, no field ever took keyboard focus. Under a global grab that means
typing goes nowhere with no other window on screen to reveal why. The
manual-workout and sick-justification forms now each name their own first
field via a `focus=` flag; `on_focus_ready` genuinely has nothing to focus
(it fires before those screens exist) and its docstring now says that instead
of claiming the lock window has no typed input at all.
`scripts/fix_2026_07_26_sport.py` re-files that walk as sport "other",
rebuilt through the form's own draft/validate/build path so it carries
exactly the writer's key set, and re-signed. `start_time` and the date are
untouched so `workout_id` stays stable and the phone converges instead of
gaining a duplicate. Kept as the audit trail for the edit; the walk's details
come from the entry and `--details`, so nothing personal lands in a tracked
file.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two things the CI mirror caught that the local pre-commit run did not.
The groups were annotated with `Any`, which ANN401 rejects. They are generic
over the widget they mirror now (`WidgetGroup[tk.Frame]`, `[tk.Text]`, ...),
so each subclass keeps its own methods typed instead of erasing them --
better than the `Any` it replaces, not just quieter.
`name-tests-test` requires every tracked file under tests/ to be named
test_*. The two helper modules the conftest split produced are not tests, so
they join the exemption `_status_view_helpers.py` already had; the pattern is
generalised to private (leading-underscore) helper modules rather than
listing files one at a time.
The lock now paints one container per live output instead of one window on
the primary, and claims the screen through an Arbiter at RANK_SCREEN_LOCKER
so the wake alarm can outrank it.
The fan-out happens at the widget factory, not the render loop. Painting a
screen here is not a pure function -- the ~20 clear_container() flows record
workouts, credit weeks and branch on state while they paint -- so re-running
a flow per surface would double those side effects. Instead `_label`,
`_button_row` and friends build N copies and return a group that mirrors
later configure calls to all of them, and a flow body still runs once. Frame
groups nest, so `_button(button_row, ...)` reads exactly as it did.
The degenerate case carries as much weight as the general one: the status
window, the post-sick-day verify window and the relaxed-day prompt have no
lock and no surfaces, and share this same factory. They get a group of
exactly one frame and behave as they always did.
Text boxes are the one thing that cannot be shared. Entries fan out over a
single StringVar, but tk.Text has no such variable, so the sick-day
description genuinely diverges per monitor; TextGroup.get() returns whichever
copy was actually typed into, preserving "answer on any monitor".
Tests: the suite hung rather than failed on first run, which is the trap
gatelock's own conftest documents -- screen_locker patches its own `tk`, but
LockWindow builds Toplevels through gatelock's, and real tkinter over a
MagicMock root recurses without bound. `_gatelock_fixtures` closes that and
redirects the runtime dir so no test can stand a production locker down.
Every other test runs single-output, where fan-out is unobservable, so
test_surface_fanout runs on two outputs; each assertion was checked by
cropping the group loops to the primary and confirming it goes red.
874 tests, 100% branch coverage, pre-commit clean, no lint suppressions.
self._colors = LockConfig(...) is now built unconditionally in
ScreenLocker.__init__ (previously only the fullscreen lock path built a
local `config`), and every raw hex literal across status_view.py,
_ui_flows.py, _ui_flows_relaxed.py, _sick_dialog.py,
_manual_workout_dialog.py, _manual_workout_widgets.py, and
_temperature_status_mixin.py now reads from it instead -- replacing
ad hoc greens/oranges/reds (#00ff00, #0066cc, #ff4444, ...) with the
shared success/accent/danger/warning/muted tokens. Also fixes the
verify-window and status-window paths that still hardcoded #1a1a1a for
the background.
This was the prerequisite the on-fill fix (previous commit) actually
needed: _window_setup.py/_ui_widgets.py/_heat_skip.py reference
self._colors, which nothing in the codebase constructed outside the
fullscreen lock path until this commit.
Verified: 859/859 tests, 100% coverage.
_ui_widgets.py's _button() always set fg=self._colors.fg (near-white)
regardless of bg, so any accent/success/warning/danger-filled button
under-contrasted (measured 2.2-3.6:1 vs the 4.5:1 floor). Added
_fg_for(bg) so fg is derived from bg instead of hardcoded -- fixes every
current _button() call site structurally, not per-instance. Found and
fixed 2 more standalone instances of the same bug outside the shared
helper (_window_setup.py's demo-close button, _heat_skip.py's heat-skip
button).
Bumps gatelock to the released v0.1.1 carrying the same on_fill token
plus the warm palette rework. Regenerated workout_app's launcher icon
assets to match.
Verified: gatelock 50/50 + screen_locker 859/859 tests, both 100%
coverage; pre-commit (incl. pylint against the real v0.1.1 install) green.
test_fills_gap_for_past_week_day and test_rescanning_an_already_filled_day
built their fixture date as date.today() - 1 day and asserted it was "this
week". _try_fill_stronglifts_for_week accepts week_start <= entry <= today,
and on a Monday week_start IS today — so yesterday (Sunday) belongs to the
previous ISO week and both tests failed. They passed Tue-Sun and failed every
Monday, which is exactly when they were noticed: they blocked an unrelated
push.
Pin "now" to Wednesday 2026-07-22 with the _FakeDatetime pattern already used
in test_status_part2, so the fixture day is Tuesday — comfortably inside the
week whatever day the suite actually runs. Verified under faketime on Mon,
Tue, Fri and Sun: 8 passed each time.
The neighbouring "last week" case needs no pinning: 8 days back always
precedes a week start, on any weekday.
Also covers the remaining branch in _try_fill_stronglifts_for_week — an
in-week JSON that fails content validation must not be written. It was
unreachable on a Monday, so the file had never hit 100% on one; the suite is
now 859 passed / 100% coverage.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The morning routine is started by systemd right after boot and right after
resume, so its sync ran seconds before DHCP/DNS were up. Every such run failed
outright — and said this:
Workout sync push FAILED for 6 workout(s): network error reading
screen-locker-sync/devices — a 403 here means the token lacks
contents:write on kuhyx/syncs
Both halves of that were wrong. It was not a 403, and the token was fine: the
same six workouts pushed successfully by hand minutes later on the same token,
which reports push=true on the repo. The message cost a real investigation
chasing a permissions bug that did not exist.
- _sync_retry.with_sync_retry wraps the three sync call sites in a bounded
retry (4 attempts, 2s/4s/8s backoff — ~14s, enough for the network to come
up, short enough not to drag the routine). Verified offline in a network
namespace: three retries, then an honest give-up.
- Any GitHubSyncError retries, deliberately including RepoNotFoundError.
Classifying transient vs permanent would couple us to which exception
crdt_sync chains where; a few wasted seconds on a genuinely bad token is the
cheaper mistake.
- The push failure log now reports what actually happened. The contents:write
hint survives only for RepoNotFoundError, which is the one error that
actually implicates the repo or the token.
Retry at the application layer rather than ordering the unit after
network-online.target: the same race hits on resume, where boot ordering does
not apply, and these are user units that cannot depend on a system target.
The tests' autouse no-sleep fixture patches the module-local `sleep` name
rather than `_sync_retry.time.sleep` — the latter mutates the shared time
module object and silently disabled sleep for the whole suite, breaking an
unrelated temperature timeout test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
has_logged_today treats an unsigned today-dated entry as "logged" only
when no HMAC key is configured on the machine (CI has none; this dev
box has a real key), so the test's precondition diverged between
environments. Reach the new weekly minimum via Jan 1-4 instead of
adding a same-day entry.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Synced manual workouts never earned shutdown/debt credit (only weekly
count), which silently missed pushing shutdown time for a same-day
workout logged on the phone. Manual workouts now go through the same
credit logic as any other workout type, count individually toward the
weekly total and rate budget (no more once-per-day collapse), and stack
same-day shutdown bonuses like verified workouts. Also bumps the weekly
minimum from 4 to 5 and doubles the monthly manual-workout budget to 10.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Check Phone only ever checked today's date, so a verified workout from
earlier in the week (e.g. yesterday's run, found once the phone connects
later) was never backfilled unless you ran the --status CLI. It now falls
back to the existing RunnerUp week-scanner plus a new StrongLifts
equivalent, still pulling and validating the real file via ADB before
crediting anything.
GPS distance tracking undershoots on tight turns/tree cover, so a run
within 5% of the 5.0 km minimum (e.g. 4.9 km) is now accepted instead of
silently rejected — duration is clock-based and gets no such leeway.
Also fixes a pre-existing bug in the --status CLI surfaced by this change:
its weekly-total summary derived counts from a per-day checkmark (max 1
per day) instead of screen_locker._weekly_check.count_weekly_workouts,
undercounting any day with more than one verified workout.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ERWuV1nExiMfiNb9Gb7AQt
The workout log stored ONE workout per calendar day, so a second same-day
workout was silently dropped and could never earn credit.
Multiple workouts per day:
- workout_log.json: {date: entry} -> {date: [entry, ...]}. Legacy entries are
wrapped on read (_log_io.load_workout_log) so their HMACs stay valid — no
re-signing; every write normalizes the file, migrating it progressively.
- New write chokepoint (_log_mixin.write_signed_entry) APPENDS and dedups by a
stable workout_id, returning RecordResult so callers can tell a new workout
from a duplicate. Re-verifying the same workout is a no-op.
- count_weekly_workouts is anti-gaming: each VERIFIED workout counts
individually; self-reported manual entries count at most once per day. Four
real workouts in one day satisfy the week; four manual entries count as one.
- Reward: the day's first counted workout gets the base +2h; an additional
same-day VERIFIED workout gets +1h; an additional manual gets nothing. The
old "+1h when weekly_count > 4" gate is replaced — weekly volume is the
banked bonus's job and shouldn't be paid twice.
- Fixed: the unlock screen labelled the +1h "#{weekly_count - 4}", which can
render negative under the new rule. Removed the dead runnerup_manual type.
- Flutter: the manual budget counts distinct DAYS, matching the PC.
PC->phone sync (it had never worked once):
- push_pc_manuals pushed from a side-store written at log-time, so anything
logged before that feature existed could never publish. _manual_push now
derives the crdt log directly from workout_log.json — the single source of
truth — covering manual AND verified runs. The record id is the workout's own
workout_id (derived for legacy entries to match the phone's format) and the
HLC comes from the entry's own timestamp, so a re-push is byte-identical and
the repo never churns.
- The phone reads every kind (readMergedWorkoutPayloads) and lists the PC's
workouts under "SYNCED FROM PC". The manual budget still sees manual-only, so
a verified run can't consume a self-report slot.
- Settings claimed "Connected." whenever a token STRING existed. It now
verifies against the API on open, so a revoked token reports 401 instead of
showing a green lie.
Never fail silently:
- 30 swallowed exceptions across 19 files now log WARNING with the concrete
cause AND consequence — plus the token guards in _workout_sync that returned
[] in total silence, the exact bug that hid the dead sync for weeks.
- New pre-commit hook (scripts/check_silent_failures.py) fails any except that
neither re-raises nor logs loudly. ruff's S110 only catches `except: pass`;
the real pattern here was `except: log.info(); return []`. Documented in
CLAUDE.md.
Verified on real data: the Jul 13 run (pulled from its actual TCX over ADB) now
counts alongside that day's manual squash, and all three workouts are published
to kuhyx/syncs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Fv8ULVt3Q67GwCFbM7doHB
Two-way sync: the PC now publishes its own manual workouts so the phone can see
them for the shared budget. Reverses the old "the PC never pushes" invariant.
- _manual_push.py (new): a small crdt-sync store of PC-originated manuals
(manual_sync_log.json, next to workout_log.json). record_pc_manual() appends
the form's entry (wrapped as the shared kind/date payload under a stable
manual: id, monotonic HLC); push_pc_manuals() runs one sync_log tick to
devices/pc/log.json. Best-effort: no token, empty store, or a 403 from a
read-only token is swallowed so the local form still works.
- _manual_workout_dialog.py: record the manual locally on form save (fast, both
hosts) — published on the next lock startup.
- screen_lock.py: push_pc_manuals() runs in the startup sync step (also retries
any manual a previous push failed to publish).
- Updated the now-false "PC only ever reads, never pushes" docstrings in
_workout_sync.py and _constants.py; noted the contents:write PAT requirement.
A PC-pushed record round-trips through the same ingestion decoder, so it is
ingestable by any device. Full suite green at 100% coverage.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PM3auNTifaVgcXWDizZrjH
Ingest manual/off-app workouts synced from the phone (or another device) into
workout_log.json so they count toward the weekly-minimum unlock. No phone UI
yet — fully driven by a crafted sync log.
- _workout_sync.py: pull_all_manual_records() merges every device log under the
sync prefix (phone, pc, …), keeping the highest-HLC copy per stable record id;
and the session-verify path (_latest_payload) now skips kind="manual_workout"
records so a manual can never be treated as a StrongLifts session.
- _manual_sync.py (new): reconstruct_draft() rebuilds a ManualWorkoutDraft from a
synced payload (raw inputs only — never trusting the phone's derived fields);
ingest_manual_records() re-validates with the same validate_manual_workout the
local form uses, enforces the rate budget, then HMAC-signs and writes each
under its own date. Idempotent (dedup by sync_record_id) and non-destructive
(never clobbers an existing counted day).
- _log_mixin.py: extract write_signed_entry(log_file, date, workout_data) so the
live save path and ingestion share one date-keyed signer; _load_existing_logs
now delegates to the shared _read_logs.
- screen_lock.py: run _ingest_synced_manual_workouts() at startup, beside the
RunnerUp auto-fill, before the lock-decision early-exits.
Trust: a phone can at most add a budget-limited honour-system manual_workout,
never a phone_verified one; the PC re-validates and signs on ingest. Full suite
green at 100% coverage.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PM3auNTifaVgcXWDizZrjH
