wake-alarm/wake_alarm/_startup.py
Krzysztof kuhy Rudnicki 9e0cd123ff Phase 3: remove the max-fan ramp, split _alarm.py, wire the new modules
Item 14: the fan ramp is gone entirely. It caused anxiety without helping
anyone wake up. Deletes _max_fans/_restore_fans/_find_fan_hwmon, the
_AlarmHardware.fan_state field, both call sites, and their tests.
wake-alarm-fans.sh and its NOPASSWD sudoers entry come out in the install.sh
pass -- dropping a passwordless root helper is a bonus.

_alarm.py was 478 lines and the 250-line gate fires on any commit that stages
it, so this carries the split it has owed for a while. New modules, each a
real seam rather than an arbitrary cut:

  _gating          should-it-run-today + CLI (no time gate; that is _trigger's)
  _beep_loop       the sounding thread, now driving _escalation's planner
  _alarm_timers    self-rescheduling challenge refresh / skip window (mixin)
  _alarm_state     the progress + hardware dataclasses
  _rounds          challenge presentation, re-exporting the view helpers
  _countdown       skip-window arithmetic and demo/production intervals
  _dismiss_view    the post-dismissal banner
  _screen_flash    the ~1.3 Hz attention flash (kept under the 3 Hz threshold)
  _lock_setup      gatelock config + arbiter claim
  _startup         wake display, brightness, plug
  _tone            tone synthesis and cache (out of _audio)
  _brightness      xrandr brightness (was in _audio, never belonged there)

main() deliberately stays in _alarm.py: morning_routine/_orchestrator.py:39
hardcodes "wake_alarm._alarm", and moving it is the exact mistake that caused
a month-long silent production failure once already. Verified after the split
that the module still resolves and accepts --production.

Also fixes the plug pre-roll found while researching speakers: main() fired
turn_on_plug() and the first beep in the same instant, so an amplifier's
soft-start relay swallowed the opening of the alarm. PLUG_PREROLL_SECONDS=4
now sits between them.

Two bugs found by running the code rather than by lint:
- ruff stripped `struct` from the extracted _tone.py because the import
  landed before its first usage; only executing it caught the NameError.
- test fixtures patched _play_on_all_sinks/_set_max_brightness at
  wake_alarm._alarm, which silently stopped intercepting once those moved.

404 tests, 100% branch coverage, no new noqa/type-ignore suppressions.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EckWmyfetYq3Mi8MAnUudh
2026-08-26 23:46:10 +02:00

48 lines
1.6 KiB
Python

"""Bring the machine's hardware up before the alarm window appears.
Split out of ``_alarm.py`` for the 250-line cap.
Nothing here blocks waiting for the monitor. It powers things on and returns;
the beep loop's per-cycle sink check and ``_reactivate``'s retry schedule pick
up outputs as they enumerate, which is a real presence check rather than a
timed guess.
"""
from __future__ import annotations
from collections.abc import Callable
import logging
import time
from wake_alarm._alarm_display import _wake_display
from wake_alarm._brightness import _set_max_brightness
from wake_alarm._constants import PLUG_PREROLL_SECONDS
from wake_alarm._sinks import _warn_if_no_real_sink
from wake_alarm._smart_plug import turn_on_plug
_logger = logging.getLogger(__name__)
_Sleep = Callable[[float], object]
def prepare_hardware(*, sleep: _Sleep = time.sleep) -> None:
"""Wake the display, raise brightness and power the speakers.
Args:
sleep: Delay function, injected so tests do not really wait.
"""
_warn_if_no_real_sink()
_wake_display()
_set_max_brightness()
# Power the speakers BEFORE the first beep. An amplifier's soft-start /
# mute relay swallows the first seconds of audio after mains is applied,
# so firing the plug and the first tone together loses the opening of the
# alarm entirely. Costs nothing when no plug is configured.
turn_on_plug()
_logger.info(
"Waiting %.1fs for speaker soft-start before the first beep",
PLUG_PREROLL_SECONDS,
extra={"event": "plug_preroll", "seconds": PLUG_PREROLL_SECONDS},
)
sleep(PLUG_PREROLL_SECONDS)